Ev > Computer Monitors Springs
Soyuducunun qapısına sabit qüvvəli yayın tətbiqi
Soyuducunun qapısına sabit qüvvəli yayın tətbiqi
In order to make the refrigerator operate effectively, the door should be kept closed. Keep the door open for a short time when putting or taking out food. However, opening it for a long time will affect its cooling and endanger food safety. It will also lead to excess power consumption. Fortunately, the modern refrigerator door can be added with a constant force spring to automatically close after you open the refrigerator for use. Nowadays, this kind of design is relatively rare in the market. It is generally a magnetic refrigerator door, which explains why the magnet is attached to it.   We have seen that it is essential to keep the refrigerator door closed all the time. If the door remains open for a long time, it will counteract the internal temperature balance and affect the quality of the food stored in it.When this situation continues for a long time, the compressor cannot maintain a low internal temperature. This undermines...
Güc yayının çəkmə məftilli kodlayıcıda tətbiqi
Güc yayının çəkmə məftilli kodlayıcıda tətbiqi
A draw-wire encoder, also known as a string potentiometer, pull wire position sensor, cable extension displacement sensor, or yo-yo potentiometer. It is a cable driven position or displacement sensor for linear position measurement and velocity using a flexible cable (wire) and a spring loaded spool.   The string pot or cable extension sensor is composed of four main components in the shell: 1. High strength stainless steel cable (rope or steel wire rope); 2. Equal diameter spool (drum); 3. Power spring with high torque and long service life; 4. Rotary potential precision sensor.   In the shell of the sensor, a soft high-strength stainless steel cable is tightly wound on a precision machined cylindrical drum (or spool) with constant diameter, which rotates with the winding and unfolding of the measuring cable. In order to maintain the tension and retraction of the steel wire, the spring is connected to the drum. Then connect the spool to the shaft of the rotary potential precision sensor (or encoder). When the...
Elektrikli avtomobilin şarj stansiyasında güc yayınının tətbiqi
Elektrikli avtomobilin şarj stansiyasında güc yayınının tətbiqi
As the times change, gas stations are gradually replaced by electric vehicle charging stations. We have always been a natural partner for designers and manufacturers of electric vehicle charging stations, because they need to be compact, clean and provide trouble free cable management solutions for their electric vehicle charging stations around the world.   By applying our power spring to the retractable cable drum, the cable wear is reduced, the tangled cable is eliminated, and the cable can be neatly stored when not in use. In this way, we help EV charging station developers shape the future of safe and trouble free charging of electric vehicles. The natural expansion trend of the power spring gives a torque to the spindle or case, resulting in a usable torque. The generated torque is cumulative, so the torque will increase as the spring is tightened and decrease as the spring is loosened. Torque and total number of turns are the most important output requirements in the design of power...
Qaytarma başlanğıc sistemlərində istifadə olunan güc yayları
Qaytarma başlanğıc sistemlərində istifadə olunan güc yayları
 Small engines are well known and are commonly used in lawn mowers and garden tractors and various other garden and lawn maintenance tools, in addition to other environments. Typically, each of these engines is equipped with a recoil starting system that includes a rope that rotates the starting mechanism to engage a flywheel that is connected to the engine for starting purposes. Once the rope starter is pulled, the recoil mechanism is always provided with the engine to reel the starter rope back to the starting mechanism.   The recoil portion of the starter mechanism is operated by a power spring that tensions when the operator pulls on the starter rope. Once the rope is fully pulled, the operator releases it. Most power springs on the market often fail, so the recoil rewinding mechanism needs to be disassembled and the spring replaced. And replacing the spring is a tedious task because the operator needs to keep the spring in the cavity inside...
Yeni Alış Nöqtəsindəki Dəyişən Güc Yayları
Yeni Alış Nöqtəsindəki Dəyişən Güc Yayları
Automatic advance shelves are more widely used in stores and people's lives, and are more often used for displaying and placing goods (incense hata, rosemary, etc.). However, the conventional shelf propeller has one end of the baffle on both sides fixed and the other end movable. Although in use, after the first row of goods is taken away, the second row of goods will be automatically pushed to the first row, which can save the staff's finishing time, but in the process of pushing the goods, it is easy to cause the goods in the back row to pop out of the display slot due to the activity of the ends of the shelf advancer on both sides of the stopper, which brings inconvenience to the use.   To provide a new type of shelf propeller for the problem of the shortcomings of the existing technology. The new shelf propeller includes a base plate, a side plate, a push plate...
Qianye Precision Simsiz Kor Yay
Qianye Precision Simsiz Kor Yay
 Imagine, on the weekend of a busy work week, unloading from work, taking a hot bath, having a leisurely dinner, and when it's time to rest, draw the curtains to isolate the noisy world outside, and then, beautiful and beautiful Sleeping until you wake up naturally, this is not the most important thing for every office worker.   However, for families with children, curtains have increasingly become a new safety hazard, especially for families with roller shutters. The pull rope of the roller blind is usually closed at the bottom or the side. If it is not fixed, the rope will slide down to form a loop, which is easy to wrap around the neck of the child, causing the child to suffocate, and even lead to death in severe cases. It is reported that there are many cases of suffocation and death of children due to rope entanglement accidents every year, mostly children under the age of 4. The...
Daimi fırlanma anı yayı götürmə cihazında belə böyük rol oynaya bilər
Daimi fırlanma anı yayı götürmə cihazında belə böyük rol oynaya bilər
Constant torque springs can help take up the wire and are used in many products. All electrical products have a cord set that is connected to the power supply, but this power cord will bring some trouble to our arrangement. The function of the constant torque spring is this, it can bring a free shrinkage process to the electrical cord set , making it easy to take up the line, very practical. When the external force reverses the constant torque spring from the natural state to the output wheel, once the external force is removed, the constant torque spring will be rolled back to the natural state, and a constant torque will be generated in the output wheel at the same time. Constant torque spring can be used in automatic winding, balance weight and power source, such as automatic winding device of power line. Advantages of constant torque spring over power spring: 1. The torque will not change as the number of turns increases. 2. There is no limit on the number of...
Computer Monitors Springs Product
 Daimi burulma yayı
Daimi burulma yayı
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
 Sabit qüvvə yay
Sabit qüvvə yay
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Güc yay
Güc yay
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
 Dəyişən qüvvə yayı
Dəyişən qüvvə yayı
Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.
 Karbon fırça yayı
Karbon fırça yayı
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Quraşdırma və montaj xidmətləri
Quraşdırma və montaj xidmətləri
Qianye şirkəti yalnız dəqiq yayların istehsalını təmin etmir, həm də bütün yay sisteminin struktur dizaynına və funksional həllərinə diqqət yetirir və sistem istehsalı və montajının tam dəstini təmin edə bilər.
Computer Monitors Springs News
 Şlanq makaralarında güc yayları
Şlanq makaralarında güc yayları

Vaxt: 2022-09-14

Transmission hoses and wires are necessary for automotive production and maintenance work, but they are time-consuming and labor-intensive to sort out after use. Another common problem is safety when handling them. This can cause serious injury if the operator is inexperienced. Bulky and unwieldy hoses are also an added risk, especially if they are too short for the job. This forces the operator to move into dangerous positions that can cause injury.   The hose reel now solves these problems by incorporating the maneuverability of the power spring, allowing the long hose to automatically retract after use and align itself continuously and neatly when retracted. In addition, considering the limitations of floor layout and staffing, the hose reel with the addition of the scrolling bar can make full use of space and improve the workplace environment. After use, the hose or wire is retracted to the winder for storage, and generally will not break, and low friction, which can extend the service life of the hose or wire. The tension on the power spring is pre-loaded at the factory, and springs produced by improperly selected manufacturers may become untensioned or over-tensioned. Too much tension can lead to fast and violent retraction as well as a short life span, and the elasticity can fail quickly.   Therefore, it is recommended that manufacturers of hose reels look for high-quality spring manufacturers, because the current reel winding function of the emergence of a deep expansion of the advertising market, so that more electrical products are constantly in the upgrade to create new product selling points. Choosing the right...
 Duş otağı nə qədər kiçik olsa da, hamam taburei quraşdırmanızı təklif edirəm
Duş otağı nə qədər kiçik olsa da, hamam taburei quraşdırmanızı təklif edirəm

Vaxt: 2022-09-14

No matter how small the shower room is, it is also recommended that you install a bath stool directly on the wall, which is stable and convenient! I've seen a social news before. It's about a pregnant woman who took a bath at home and slipped and had an accident. To be honest, no one wants this to happen, but because many detailed problems were not paid attention to during the decoration, it led to a series of problems! In fact, when decorating the shower room, we must take safety measures. Not only families with elderly, children and pregnant women, but also ordinary people need a safe environment for bathing. After all, the shower room is a place with large water consumption. It doesn't pay to fall and hurt! The first step of safety measures is to choose anti-skid bricks on the ground. Secondly, for families with elderly, children and pregnant women, it is best to install a bathing stool. Don't think the bath stool takes up space. It has many functions! And only one square meter of space can also be installed, directly installed on the wall, stable and convenient! At ordinary times, the bath is standing and washing. It is inevitable that there will be tired and uncomfortable after a long time. If there is a place in the shower room where you can sit and rest, it is absolutely convenient and comfortable. You can not only sit and rest, but also sit in the bath. For example, when rubbing your legs, you don't have to bend down...
 Sabit qüvvə yayları
Sabit qüvvə yayları

Vaxt: 2022-09-14

The extension type of Constant Force Spring represents the most basic, yet most versatile, type of constant force spring. It is a pre-stressed flat strip of spring material which is formed into virtually constant radius coils around itself or on a drum. When the strip is extended (deflected) the inherent stress resists the loading force, the same as a common extension spring, but at a nearly constant (zero) rate. A constant torque is obtained when the outer end of the spring is attached to another spool and caused to wind in either the reverse or same direction as it is originally wound. The full rated load of the spring is reached after being deflected to a length equal to 1.25 times its diameter. Thereafter, it maintains a relatively constant force regardless of extension length. The load is basically determined by the thickness and width of the material and the diameter of the coil. Qianye Spring  offers a stock of constant force springs in a variety of life cycle ranges. Each spring is a coil of high-yield Type 301 stainless steel band that exerts a nearly constant binding force to resist unwinding. We can also provide custom constant force springs to your specifications.        Guide to Mounting Constant Force Springs         A Constant Force Spring is usually mounted by first tightly wrapping it on a drum, then attaching the free end to the loading force such as in a counterbalance application. This relationship can also be reversed. 1.The drum diameter should be 10% to 20% larger than its natural inside diameter. 2.One...
 Qaldırıcı pəncərədə sabit qüvvəli yayın tətbiqi
Qaldırıcı pəncərədə sabit qüvvəli yayın tətbiqi

Vaxt: 2022-09-14

The lifting window is different from the traditional internal opening, external opening and ordinary push-pull mode, but adopts the opening mode of lifting up and down. Because it is mainly popular in North America, it is also called American lifting window. It is one of the two major door and window categories in the world. The lifting window is more compact than the left and right lifting windows, which is determined by the structure of the window. The traditional lifting window is a sash frame structure, that is, when the window sash is opened left and right, it is realized by sliding the lower pulley on the sliding rail of the window frame. However, there is a gap between the pulley and the slide rail, and the smoothness of the opening must be taken into account, which will inevitably lead to the decline of the sealing performance. The lifting window is a frame-encased sash structure. The sash is wrapped in the window frame and runs vertically up and down. Through the multiple seals of high-quality siliconized tops, the sash frame is tightly fitted around it, and the sealing performance is significantly better than that of the left and right lifting windows, second only to Fixed and casement windows.       The advantages of the sliding doors and windows are: 1. The characteristics of large ventilation, the lifting windows can be opened by 2/1, and the air entering the room can be convected. The European-style lifting windows and casement windows basically cannot open more than half of the area. Second, there can be different...
 Kiçik yay böyük təsir göstərir
Kiçik yay böyük təsir göstərir

Vaxt: 2022-09-15

The reason why the world we live in is so orderly is that there are precise links between large and small objects. So many things in life are crucial. Whether they are large or small, they are indispensable to our life, but some small parts in life are unknown, but there are tens of thousands of them. The spring I know is also one of them. It always exists in a position that people can't see and does their own thing silently. Moreover, he exists everywhere in life, even if we don't know it. Today, I will explain the functions of these small springs. Spring is a kind of mechanical part that uses elasticity to work. Generally made of spring steel. Although the spring is small, as a general basic part, it has large quantity, wide range and complex varieties. It is used to control the movement of mechanical parts, mitigate impact or vibration, store energy, measure the size of force, etc. it is widely used in machines and instruments. The application field involves almost all fields of the national economy. Spring plays a big or small role in all articles in our life. It also has different shapes and structures because of different force values. However, according to the force value, people still divide it into three categories: constant force spring, power spring and variable force spring. Its working principle is to use one of its characteristics. It deforms it by applying force and will also try to return to its original state. Let me show you how springs...
 Təyyarənin baqaj hissəsində güc yayınının tətbiqi
Təyyarənin baqaj hissəsində güc yayınının tətbiqi

Vaxt: 2022-09-14

Luggage compartments in the aircraft cabin are usually located above the heads of seated passengers. To ensure optimum headroom between luggage compartments on the one hand, and to facilitate loading on the other hand, aircraft luggage racks can be lowered from shell luggage compartments or trays in certain applications. When lowered, the front of the luggage compartment opens for loading. A luggage compartment with a lowered housing for an aircraft, wherein the lowered housing is connected to a pulley attached to a support structure of the aircraft by a cable. In order to lower the shell, when the rope lifts the shell on the pulley, the rope is released from the pulley, in which the pulley is biased by the force of the power spring along the rotation direction of the rope wound on the pulley. The power assistance for the pivoting of the luggage cover is realized as a spring device. This solution can achieve low maintenance and wear-free equipment in every case.   The natural tendency to expand of the power spring imparts a moment to the arbor or case, resulting in usable torque. The torque produced is cumulative, so the torque increases as the spring is tightened and decreases as the spring is loosened. Power springs that can be assembled into the customer's housing for immediate assembly, or a retaining ring is provided for transferring the spring into the customer's housing. Power spring torque and total turns are the most important output requirements in power spring design. The performance of a power spring depends on the size of the spring material (thickness, width and length) and available space (housing and mandrel...
 Motor fırça yayı və külək turbininə qulluq
Motor fırça yayı və külək turbininə qulluq

Vaxt: 2022-09-14

Research shows that to get the greatest return from turbines, whether onshore or offshore, the bigger the turbine, the better. Wind turbines have proven to produce reliable and pollution-free energy, and as technology innovates, the cost of developing and manufacturing them will only become more affordable.  Motor Brush Materials and Wind Turbine Maintenance     Motor brushes are consumables, which means there is significant wear and tear over time and will need to be replaced. While proper wind turbine operation and maintenance requires moderate wear, excessive wear can create carbon dust in the slip ring cabinet, reducing internal isolation.      Also, a useful tip to keep in mind is that motor brushes that are evenly worn indicate good performance. Since reliability is critical in wind applications that generate electricity for industrial tasks and homes, businesses and schools, it is important to work closely with your engineers and parts manufacturers to determine the best motor brush materials. Two common options include: Copper carbon brushes are very common and affordable. They can be used for up to two years, but due to the high amount of carbon dust, they need a lot of maintenance. On the other hand, silver motor brushes are more expensive, but cleaner, can withstand harsh weather, and can be used for up to five years. Slip ring compatibility and design is another component to consider. Although there is wear, your motor brush must maintain a stable surface finish to avoid overtime affecting the performance of the brush. Due to the high cost of repair or replacement of wind...
 Daimi fırlanma anı yayı götürmə cihazında belə böyük rol oynaya bilər
Daimi fırlanma anı yayı götürmə cihazında belə böyük rol oynaya bilər

Vaxt: 2022-09-14

Constant torque springs can help take up the wire and are used in many products. All electrical products have a cord set that is connected to the power supply, but this power cord will bring some trouble to our arrangement. The function of the constant torque spring is this, it can bring a free shrinkage process to the electrical cord set , making it easy to take up the line, very practical. When the external force reverses the constant torque spring from the natural state to the output wheel, once the external force is removed, the constant torque spring will be rolled back to the natural state, and a constant torque will be generated in the output wheel at the same time. Constant torque spring can be used in automatic winding, balance weight and power source, such as automatic winding device of power line. Advantages of constant torque spring over power spring: 1. The torque will not change as the number of turns increases. 2. There is no limit on the number of available turns, and the design of multiple turns mostly adopts constant torque spring.  3. The number of invalid turns is less, more energy can be stored and the efficiency is higher. Many take-up devices on the market are prone to dislocation or jamming during take-up due to the improper selection of spring, resulting in confusion and low take-up efficiency. Shenzhen Qianye Precision Metal Co., Ltd. has been specializing in the production of spring for more than 20 years. Qianye precision spring engineers can help you improve and improve your products. Contact us at any stage of your project for expert help and technical...