У дома > Блог > Индустриална информация > Прилагане на пружина с постоянна сила в механизма за балансиране на собственото тегло на устройството за вземане на проби

Прилагане на пружина с постоянна сила в механизма за балансиране на собственото тегло на устройството за вземане на проби

източник:Qianye Precision време:2022-9-14

At present, various sample probes and reagent probes are used in medical laboratory equipment to suck samples, add samples, suck and test u, add reagents, measure and other operations. Most of the devices used in these action combinations are intelligent sampling devices, and the system used can automatically process data. Due to the full function and complex mechanism of the sampling device, the self weight of the system device is large, This brings higher and higher performance and power requirements to the driving motors of various sampling devices.

The self weight balance mechanism is set between the sampling device and the main structure and is composed of a lifting device and a пружина с постоянна сила. The lifting device is composed of gears, racks and linear guide rails. The gears are driven by the motor and fixed on the main structure with the motor. The rack and the gear mesh to move up and down. The rack is fixed on the linear guide rail and the sampling device is fixed on the rack, The lifting device can also be composed of gear combination roller chain or synchronous belt, ball screw or flexible rope.

The upper end of the пружина с постоянна сила is fixed on the main structure, and the lower end of the пружина с постоянна сила is wound on a roll shaft on the sampling device. The roll shaft can rotate with the rise and fall of the sampling device. According to the height of the rise and fall of the sampling device, the excess part of the пружина с постоянна сила can always be wound on the roll shaft. No matter how long the пружина с постоянна сила is stretched, its own force wound on the roll shaft is constant, and the tension of the пружина с постоянна сила is greater than or equal to the rack The sum of the gravity of the linear guide rail and the sampling device.

  Пружина с постоянна сила is made of steel strip. When it is straightened by external force, the spring will naturally roll back and produce elastic force. The advantages of constant force spring over traditional wire spring are as follows:

  1.High elastic output can be achieved in a very small device space.

 2.Maintain a certain elasticity in all strokes. The preload stroke is short, that is, the required elasticity can be achieved through a short stroke. The original long-term is smaller than the line spring, and the stroke is unlimited.

  When designing or specifying a пружина с постоянна сила, трябва да се вземат предвид много основни инженерни параметри. Материал, издръжливост на умора, натоварване на опън, въртящ момент и триене, скорост и ускорение, монтаж, съображения за безопасност и среда на приложение са ключови фактори.

Shenzhen Qianye Precision Metal Co., Ltd. is a global spring manufacturer with more than 20 years of spring manufacturing experience. As a professional spring supplier, we can provide all kinds of spring springs, as well as the application design and solutions of all kinds of springs. We sincerely suggest that customers obtain consulting services from our R&D engineers at the initial stage of product introduction and development. Assist in product design, development and proofing according to your needs, so that your products can find the best solution to meet your application needs.

Тагове: ,

Последни новини

 Torsion springs: where are they used and why did you choose to utilize them?
Torsion springs: where are they used and why did you choose to utilize them?

Time:2022-12-1

There are many types of springs, but the most common are torsion springs. The design of torsion springs is optimized to maintain maximum rotational pressure between two surfaces, these helical or helical springs are usually adhered to the coils at both suspended ends. These ends are connected to external components, which are then rotated to apply bending stress. Unlike other...

 Фактори, влияещи върху разкъсването на силовите пружини
Фактори, влияещи върху разкъсването на силовите пружини

Час: 2022-9-15

Силовата пружина е изработена от лента от неръждаема стомана. За ограничаване на външния му диаметър е необходима пружинна кутия. Центърът на пружината е свързан с вала. Когато се приложи външна сила, за да накара вала да се върти спрямо пружината, пружината ще се търкаля в центъра на вала и ще съхранява въртящия момент. Когато външната сила изчезне,...

 Пружини с постоянна сила, използвани в аксесоари за стенен монтаж
Пружини с постоянна сила, използвани в аксесоари за стенен монтаж

Час: 2022-9-14

Тъй като все повече и повече хора прекарват все повече и повече време, използвайки компютри, потребителите на компютри прекарват повече време седнали или изправени на своите бюра или работни станции пред устройства. Поддържането на това, което експертите наричат „най-доброто ергономично позициониране“, може да подобри нивата на енергия и цялостния комфорт. За тази цел входните и изходните устройства трябва да бъдат поставени на подходящи позиции. Правилната позиция може...

 Do you know about the constant force spring module?
Do you know about the constant force spring module?

Час: 2022-9-14

 I'm sure many of you know what a constant force spring is, right? A constant force spring is a spring that maintains a constant spring force for a specific stroke, also called a constant force spring, and is used in a linear motion, usually using its rebound force. A constant force spring consists of a spiral-shaped metal sheet that is bent on the inside so that...

 Пружинен двигател с постоянен въртящ момент
Пружинен двигател с постоянен въртящ момент

Час: 2022-9-3

 A constant torque spring motor is a strip of prestressed spring material that forms a coil and is stored on a small storage drum. The free end is then pinned and rewound onto the larger output drum; this is the "winding" part of the constant torque spring cycle. When the output drum is released, the spring will return to the...

 Приложение на силовата пружина в колелото за здраве на корема
Приложение на силовата пружина в колелото за здраве на корема

Час: 2022-9-14

Abdominal health wheel is a small pusher that can exercise muscles, joints and reduce weight. The material is generally high-quality engineering plastic, with simple design, beautiful appearance, firmness and durability, and easy to use. It is used to exercise the fat of abdomen, waist, hip, arm and other parts of the body. Due to the simple site required for exercise,...

Product
 Услуга за оптимизиране на дизайна
Услуга за оптимизиране на дизайна
От идеи за продукти, дизайн до производство на завършен продукт, ние можем да помогнем на клиентите да ги завършат и да помогнем на клиентите да оптимизират своите продукти от професионална гледна точка на използване на пружини, ускоряване...
 Пружина с постоянна сила
Пружина с постоянна сила
Характеристика: Пружините с постоянна сила (постоянна сила) се навиват от ленти от неръждаема стомана. Стоманените ленти с висока якост се оформят от специфично производствено пружинно оборудване. Когато външната сила ги изправи,...
 Силова пружина
Силова пружина
Характеристика: Силовата пружина е навита от стоманена лента. За ограничаване на външния му диаметър е необходима пружинна кутия. Центърът на пружината е свързан с вала. Кога...
 Пружина с променлива сила
Пружина с променлива сила
Характеристика: Външният вид на пружината с променлива сила и пружината с променлива усукване е много подобен на пружината с постоянна сила и пружината с постоянно усукване. Пружините с променлива сила и пружините с променлива усукване могат...
 Услуги по сглобяване и монтаж
Услуги по сглобяване и монтаж
Компанията Qianye не само осигурява производството на прецизни пружини, но също така се фокусира върху структурния дизайн и функционалните решения на цялата пружинна система и може да осигури цялостна...
 Постоянна торсионна пружина
Постоянна торсионна пружина
Характеристика: Фиксираната (постоянна) въртяща пружина (пружина) е изработена от неръждаема стомана. Външната сила връща главната пружина от нейното естествено състояние към изходното колело (съхранение на енергия). Когато...