torsion springs

Power spring in the design of the car covers

Car covers are commonly used automotive protective articles, but the folding and storage of car covers is a troublesome thing. In order to solve this problem, invention lovers have done a lot of useful exploration and put forward many solutions. One kind of scheme is to use power to drive the reel to directly roll up the car cover cloth. Using the reel to directly roll up the car cover cloth can achieve the purpose of rapid retraction of the car cover, but there are the following problems in actual use: first, the winding and friction of the reel when directly rolling up the car cover cloth wear the car cover cloth greatly; second, in order to adapt to the width of the car cover cloth, the width of the car cover retracting device must be close to the width of the car cover cloth. If it is too narrow, it will increase the winding of the car cover cloth,...

Application of carbon brush spring in wind turbine slip ring brush holder

In order to prevent accidents caused by excessive wear of the carbon brushes on the collector device of the slip ring brush holder of the wind turbine, a normally closed switch-type alarm unit is configured for each carbon brush, and these alarm units are connected in series to the alarm. In the prior art, the grounding brush is held on the structure using a coil spring pressure finger lever structure. In order to ensure sufficient pressure after the carbon brush is worn, the initial pressure of the spring has to be increased, which aggravates the wear of the carbon brush. However, in the later stage of carbon brush wear, the tension of the coil spring becomes insufficient again, resulting in poor contact between the carbon brush and the slip ring, frequent beating, resulting in breakage; at the same time, from the carbon brush to the alarm unit, the intermediate link is complex and easy to Lead to false alarm or no alarm, reducing the...

Application of constant torque spring in wireless radio

With the increasing attention of human beings to environmental issues in the process of social progress, green and low-carbon has become a popular new trend, and energy-saving and environmental protection technologies and products continue to emerge, which are affecting and changing our lives. Hand power generation is a green way of energy supply. The generator powered by the radio contains a constant torque spring motor. When tightening the spring, the spring is gradually wound onto the larger drum, and the mechanical energy obtained during winding is converted into potential energy and stored in the spring. When the spring is released, the stored energy passes through the gear transmission device and the rotating motor to generate output voltage, which is then adjusted by the zener diode to supply power to the radio in the form of a plug.   Constant torque spring motor is a prestressed spring material belt, which forms a coil and is stored on a small storage drum. Then fix the...

Application of power spring in speed difference crash arrester

The speed difference anti-fall device can quickly brake and lock falling objects within a limited distance, which is suitable for cargo hoisting and protects the life safety of ground operators and the damage of the lifted workpiece. It is suitable for safety protection to prevent the workpiece from being lifted accidentally when the crane is hoisted. It can effectively protect the life safety of ground operators and the damage of the workpiece to be lifted. It is used in metallurgical automobile manufacturing, petrochemical industry, engineering construction, electricity, ships , communications, pharmaceuticals, bridges and other high-altitude workplaces.   So do you know how the speed difference crash arrester works?   When there is no solid structure above the operating point for fixing the safety rope, the working platform cannot be set up temporarily, and it is inconvenient to use the safety belt at the same time, the differential fall arrester can be used, which is also a supplement and improvement to...

Custom springs for medical devices

For most of the past two decades, the medical device industry has been booming. Healthcare research has led to the rapid expansion of specific devices used to treat medical needs, from rare to common. These devices range from simple to surprisingly complex, often including automatic sensors, computer monitoring, and even remote monitoring by healthcare providers. When you are designing for a new medical device, it is essential to consider the components you must put together and the system they will create. This means breaking down your design to a level where you can visualize the components that need to go into the project. This means designing each spring assembly individually after evaluating the available options. To help you solve this problem, here are the four most commonly used springs for medical devices and their current common applications.    Constant force springs Constant force springs provide a smooth range of motion and a constant load in either extending or retracting direction. This...

Qianye Spring прави тласкачите ви да се открояват от другите

Supermarkets and convenience stores can be seen everywhere in the streets and alleys. More and more people are developing retail sales. Businesses will think of the question "How can we overcome each other and stand out in the competition of peers". If you want to stand out from the peers, innovation is indispensable. Now many large shopping malls will install shelf pushers on the shelves, which is not only convenient for customers but also convenient for tally staff, killing two birds with one stone. According to tests, the installation of automatic rack pushers can increase turnover and save labor. Traditionally, the products on the shelves are usually placed in order. When a customer buys the product, it is difficult for the customer to see the product at the back. And install the automatic propeller, after the customer buys the product, the propeller will automatically advance the product in the back, when the customer wants to find the product, it is...

No matter how small the shower room is, I suggest you install a bath stool

No matter how small the shower room is, it is also recommended that you install a bath stool directly on the wall, which is stable and convenient! I've seen a social news before. It's about a pregnant woman who took a bath at home and slipped and had an accident. To be honest, no one wants this to happen, but because many detailed problems were not paid attention to during the decoration, it led to a series of problems! In fact, when decorating the shower room, we must take safety measures. Not only families with elderly, children and pregnant women, but also ordinary people need a safe environment for bathing. After all, the shower room is a place with large water consumption. It doesn't pay to fall and hurt! The first step of safety measures is to choose anti-skid bricks on the ground. Secondly, for families with elderly, children and pregnant women, it is best to install a bathing stool....