Heim > Computer Monitors Springs
Anwendung einer Feder mit konstanter Kraft in einer Kühlschranktür
Anwendung einer Feder mit konstanter Kraft in einer Kühlschranktür
In order to make the refrigerator operate effectively, the door should be kept closed. Keep the door open for a short time when putting or taking out food. However, opening it for a long time will affect its cooling and endanger food safety. It will also lead to excess power consumption. Fortunately, the modern refrigerator door can be added with a constant force spring to automatically close after you open the refrigerator for use. Nowadays, this kind of design is relatively rare in the market. It is generally a magnetic refrigerator door, which explains why the magnet is attached to it.   We have seen that it is essential to keep the refrigerator door closed all the time. If the door remains open for a long time, it will counteract the internal temperature balance and affect the quality of the food stored in it.When this situation continues for a long time, the compressor cannot maintain a low internal temperature. This undermines...
Application of power spring in draw-wire encoder
Application of power spring in draw-wire encoder
A draw-wire encoder, also known as a string potentiometer, pull wire position sensor, cable extension displacement sensor, or yo-yo potentiometer. It is a cable driven position or displacement sensor for linear position measurement and velocity using a flexible cable (wire) and a spring loaded spool.   The string pot or cable extension sensor is composed of four main components in the shell: 1. High strength stainless steel cable (rope or steel wire rope); 2. Equal diameter spool (drum); 3. Power spring with high torque and long service life; 4. Rotary potential precision sensor.   In the shell of the sensor, a soft high-strength stainless steel cable is tightly wound on a precision machined cylindrical drum (or spool) with constant diameter, which rotates with the winding and unfolding of the measuring cable. In order to maintain the tension and retraction of the steel wire, the spring is connected to the drum. Then connect the spool to the shaft of the rotary potential precision sensor (or encoder). When the...
Anwendung der Antriebsfeder in der Ladestation für Elektrofahrzeuge
Anwendung der Antriebsfeder in der Ladestation für Elektrofahrzeuge
As the times change, gas stations are gradually replaced by electric vehicle charging stations. We have always been a natural partner for designers and manufacturers of electric vehicle charging stations, because they need to be compact, clean and provide trouble free cable management solutions for their electric vehicle charging stations around the world.   By applying our power spring to the retractable cable drum, the cable wear is reduced, the tangled cable is eliminated, and the cable can be neatly stored when not in use. In this way, we help EV charging station developers shape the future of safe and trouble free charging of electric vehicles. The natural expansion trend of the power spring gives a torque to the spindle or case, resulting in a usable torque. The generated torque is cumulative, so the torque will increase as the spring is tightened and decrease as the spring is loosened. Torque and total number of turns are the most important output requirements in the design of power...
Triebfedern, die in Rückstoßstartsystemen verwendet werden
Triebfedern, die in Rückstoßstartsystemen verwendet werden
 Small engines are well known and are commonly used in lawn mowers and garden tractors and various other garden and lawn maintenance tools, in addition to other environments. Typically, each of these engines is equipped with a recoil starting system that includes a rope that rotates the starting mechanism to engage a flywheel that is connected to the engine for starting purposes. Once the rope starter is pulled, the recoil mechanism is always provided with the engine to reel the starter rope back to the starting mechanism.   The recoil portion of the starter mechanism is operated by a power spring that tensions when the operator pulls on the starter rope. Once the rope is fully pulled, the operator releases it. Most power springs on the market often fail, so the recoil rewinding mechanism needs to be disassembled and the spring replaced. And replacing the spring is a tedious task because the operator needs to keep the spring in the cavity inside...
Variable Force Springs In New Point Of Purchase Display
Variable Force Springs In New Point Of Purchase Display
Automatic advance shelves are more widely used in stores and people's lives, and are more often used for displaying and placing goods (incense hata, rosemary, etc.). However, the conventional shelf propeller has one end of the baffle on both sides fixed and the other end movable. Although in use, after the first row of goods is taken away, the second row of goods will be automatically pushed to the first row, which can save the staff's finishing time, but in the process of pushing the goods, it is easy to cause the goods in the back row to pop out of the display slot due to the activity of the ends of the shelf advancer on both sides of the stopper, which brings inconvenience to the use.   To provide a new type of shelf propeller for the problem of the shortcomings of the existing technology. The new shelf propeller includes a base plate, a side plate, a push plate...
Qianye Precision Cordless Blind Spring
Qianye Precision Cordless Blind Spring
 Imagine, on the weekend of a busy work week, unloading from work, taking a hot bath, having a leisurely dinner, and when it's time to rest, draw the curtains to isolate the noisy world outside, and then, beautiful and beautiful Sleeping until you wake up naturally, this is not the most important thing for every office worker.   However, for families with children, curtains have increasingly become a new safety hazard, especially for families with roller shutters. The pull rope of the roller blind is usually closed at the bottom or the side. If it is not fixed, the rope will slide down to form a loop, which is easy to wrap around the neck of the child, causing the child to suffocate, and even lead to death in severe cases. It is reported that there are many cases of suffocation and death of children due to rope entanglement accidents every year, mostly children under the age of 4. The...
A constant torque spring can play such a big role in the take-up device
A constant torque spring can play such a big role in the take-up device
Constant torque springs can help take up the wire and are used in many products. All electrical products have a cord set that is connected to the power supply, but this power cord will bring some trouble to our arrangement. The function of the constant torque spring is this, it can bring a free shrinkage process to the electrical cord set , making it easy to take up the line, very practical. When the external force reverses the constant torque spring from the natural state to the output wheel, once the external force is removed, the constant torque spring will be rolled back to the natural state, and a constant torque will be generated in the output wheel at the same time. Constant torque spring can be used in automatic winding, balance weight and power source, such as automatic winding device of power line. Advantages of constant torque spring over power spring: 1. The torque will not change as the number of turns increases. 2. There is no limit on the number of...
Computer Monitors Springs Product
 Feder mit variabler Kraft
Feder mit variabler Kraft
Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.
 Kraftfeder
Kraftfeder
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
 Feder mit konstanter Kraft
Feder mit konstanter Kraft
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Konstante Torsionsfeder
Konstante Torsionsfeder
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
 Montage- und Montageservice
Montage- und Montageservice
Die Qianye Company bietet nicht nur die Produktion von Präzisionsfedern an, sondern konzentriert sich auch auf das strukturelle Design und die funktionalen Lösungen des gesamten Federsystems und kann einen kompletten Satz Systemproduktion und -montage anbieten
 Optimierungsdesign-Service
Optimierungsdesign-Service
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.
Computer Monitors Springs News
 Constant force spring damper
Constant force spring damper

Zeit: 2022-9-14

Dampers are widely used in building structures to dissipate energy and reduce vibration. However, the traditional damper has complex structure, poor durability and corrosion resistance, and low working stability. After using for a period of time, the damper is prone to aging and deformation can not be restored, so it can not be used anymore. Most of the existing dampers use shape memory alloy (SMA), which is a material composed of more than two kinds of metal elements through thermoelasticity, martensitic transformation and its inversion; Using shape memory alloy, the damper can automatically restore to its original shape after deformation, which is used for the restoration of building structures after deformation. However, the existing dampers only use the performance of shape memory alloy (SMA) wire itself, and the cost is expensive, which is not conducive to the large-scale use of dampers.   The design of constant force spring can be added to the self resetting damper. The damper includes piston parts, U-shaped plates and moving rods. The constant force spring is set between the tension moving rod and the pressure moving rod. The constant force spring tightens the tension moving rod and the pressure moving rod to be close to each other, so that the tension moving rod and the pressure moving rod respectively lean against the end close to each other in the corresponding sliding hole. It is conducive to the large-scale use of self resetting dampers. Constant force spring is a kind of functional material with high ductility, which has the advantages of constant load, high energy storage density, low friction loss and so on....
 Nine factors that should be paid attention to in spring production
Nine factors that should be paid attention to in spring production

Zeit: 2022-9-14

A spring is a mechanical part that works with elasticity. Generally made of spring steel. It is used to control the movement, buffering or vibration, energy storage, force measurement, etc. of mechanical parts, and is widely used in machines and instruments. (1) Elastic limit - the elastic limit is related to the tensile strength. Selecting a material with a high elastic limit is usually equivalent to selecting a material with a high tensile strength. (2) Spring coefficient - the stress applied to the spring material to produce a unit strain is called the elastic coefficient value, which mainly depends on its chemical composition.    (3) Fatigue strength - fatigue strength must be considered for springs subjected to dynamic loads.   There is a certain relationship between fatigue strength and tensile strength of materials. (4) Hardenability - in order to improve the quenching effect, the material is required to have good hardenability, and at least 50% of the central block iron structure shall be quenched. (5) Shape and size - the mechanical properties of the spring material change with the size. The manufacturing size of the spring material is allowed to have tolerances. Therefore, the material must be selected according to the accuracy of the spring load characteristics.(6) Heat resistance - some springs are used at certain high temperatures. Generally, the mechanical properties of spring materials decrease with the increase of temperature, and the spring performance decreases after a certain temperature.   (7) Corrosion resistance - when the spring is used in a corrosive environment, the corrosion resistance of the material mainly depends on its chemical composition.    There are many corrosion factors, so we...
 Application of power spring in aircraft luggage compartment
Application of power spring in aircraft luggage compartment

Zeit: 2022-9-14

Luggage compartments in the aircraft cabin are usually located above the heads of seated passengers. To ensure optimum headroom between luggage compartments on the one hand, and to facilitate loading on the other hand, aircraft luggage racks can be lowered from shell luggage compartments or trays in certain applications. When lowered, the front of the luggage compartment opens for loading. A luggage compartment with a lowered housing for an aircraft, wherein the lowered housing is connected to a pulley attached to a support structure of the aircraft by a cable. In order to lower the shell, when the rope lifts the shell on the pulley, the rope is released from the pulley, in which the pulley is biased by the force of the power spring along the rotation direction of the rope wound on the pulley. The power assistance for the pivoting of the luggage cover is realized as a spring device. This solution can achieve low maintenance and wear-free equipment in every case.   The natural tendency to expand of the power spring imparts a moment to the arbor or case, resulting in usable torque. The torque produced is cumulative, so the torque increases as the spring is tightened and decreases as the spring is loosened. Power springs that can be assembled into the customer's housing for immediate assembly, or a retaining ring is provided for transferring the spring into the customer's housing. Power spring torque and total turns are the most important output requirements in power spring design. The performance of a power spring depends on the size of the spring material (thickness, width and length) and available space (housing and mandrel...
 What factors will directly affect the use of power springs?
What factors will directly affect the use of power springs?

Zeit: 2022-9-14

A power spring is a mechanical part that uses elasticity to work. Parts made of elastic materials deform under the action of external force, and return to their original shape after the external force is removed. Also known as "winding spring". The production process of the clockwork spring manufacturer can be completed at one time from simple procedures to complex procedures, and it is equipped with online testing equipment to produce high and stable products. Generally made of spring steel. The types of clockwork springs are complex and diverse. According to the shape, there are mainly spiral clockwork springs, clockwork springs, plate clockwork springs, special-shaped clockwork springs, etc.    Power Spring Application:    The application category is generally used in clocks, recording instruments, motor toys, tape measures, car starter     motors, storage wire boxes, etc.     Power spring classification:     The plane power springs are classified according to whether they are in contact with the adjacent working parts:        ① non-contact plane power springs, ② contact plane power springs.     The fixing methods of the fixed end of the plane power spring are:     ① hinged fixing, ② pin fixing, ③ v-shaped fixing, ④ lining fixing.     1. The main factor affecting the strength of the spring is its material. The higher the yield degree of the material, the higher the fatigue strength of the spring. Therefore, to ensure the fatigue strength of the spring, the material of the spring should be studied first.    2. The quality of the spring surface has a great...
 Anwendung von Federn in Industrietoren
Anwendung von Federn in Industrietoren

Zeit: 2022-9-14

The constant force spring of the industrial door mainly plays a balancing role and reduces the burden on the motor. The force of the spring is equivalent to the force of the industrial door, which is the most ideal configuration state. If the spring force is too large or too small, it will affect the operation of the industrial door. In severe cases, safety accidents may occur and endanger others.        Constant force springs are often used to provide balance to products, so what is balance?        Constant force springs are most useful in applications that require consistent recoil. Ordinary springs behave according to a mathematical equation called Hooke's law. Hooke's law states that the force of a recoil spring in the direction of recoil is equal to the distance the spring is displaced from equilibrium. Simply put, we look at how far the spring is stretched - multiplied by a mathematical constant, the rate of the spring. The recoil direction of the spring is opposite to the stretch direction. ,km        Hooke's Law does not affect constant force springs because their recoil remains constant throughout their range of motion. Their unique design consists of a thin, coiled steel strip that rests when fully coiled. Constant force springs are loaded when they are partially or fully deployed. When released, the spring springs back, pulling the extended ribbon back and rolling up properly. Since the recoil force is mainly obtained closest to the take-up roll, a constant force is maintained. A constant force spring can...
 No matter how small the shower room is, I suggest you install a bath stool
No matter how small the shower room is, I suggest you install a bath stool

Zeit: 2022-9-14

No matter how small the shower room is, it is also recommended that you install a bath stool directly on the wall, which is stable and convenient! I've seen a social news before. It's about a pregnant woman who took a bath at home and slipped and had an accident. To be honest, no one wants this to happen, but because many detailed problems were not paid attention to during the decoration, it led to a series of problems! In fact, when decorating the shower room, we must take safety measures. Not only families with elderly, children and pregnant women, but also ordinary people need a safe environment for bathing. After all, the shower room is a place with large water consumption. It doesn't pay to fall and hurt! The first step of safety measures is to choose anti-skid bricks on the ground. Secondly, for families with elderly, children and pregnant women, it is best to install a bathing stool. Don't think the bath stool takes up space. It has many functions! And only one square meter of space can also be installed, directly installed on the wall, stable and convenient! At ordinary times, the bath is standing and washing. It is inevitable that there will be tired and uncomfortable after a long time. If there is a place in the shower room where you can sit and rest, it is absolutely convenient and comfortable. You can not only sit and rest, but also sit in the bath. For example, when rubbing your legs, you don't have to bend down...
 Fügen Sie dem mechanischen Arm eine Feder mit konstanter Kraft hinzu, um ihn stabiler zu machen
Fügen Sie dem mechanischen Arm eine Feder mit konstanter Kraft hinzu, um ihn stabiler zu machen

Zeit: 2022-9-14

Adjustable mechanical arms are commonly used in offices, laboratories, studios and other locations to support objects at various angles and heights, such as lights, computer screens, laboratory instruments, microphones, etc.   The adjustable manipulator consists of a base member and two connecting rods connected through a pivot joint, which are held in place by friction in the joint. By using spring assisted balancing devices that compensate for most of the weight, the amount of friction required to keep the equipment in place is reduced.   The pivot is a connecting ring that can rotate around an axis set at the pivot point, and a way to attach a spring to the pivot point to reduce the amount of force required. Apply to the arm to place the supported object in the desired position. The auxiliary balance device uses a constant force spring, because the constant force spring provides a smooth range of motion and a constant load in the extension or retraction direction. This can provide smooth motion and force requirements that predict the smallest detail, and the force applied by the constant force spring is more constant over the entire range of motion of the two arms of the device. If coil spring balance is used, a constant force may not be applied to the supported object at all positions of the upper arm part and the lower arm part. For example, at the far end of the range of motion, usually, the force applied to the supported object is insufficient or too large, making it difficult and troublesome to place the...
 Constant force spring applied to the brake for remote surgery
Constant force spring applied to the brake for remote surgery

Zeit: 2022-9-14

Minimally invasive medical technology is used to reduce the number of foreign tissues that may be damaged during diagnosis or surgery, so as to reduce the recovery time, discomfort and adverse side effects of patients. The surgeon can operate the controller on the console to indirectly operate the instrument connected to the remotely operated actuator. The instrument can be disassembled from the remotely controlled actuator, so that the instrument can be disinfected separately and selected to be used as the instrument required for surgery. Combine. Instruments may be changed during surgery.   Using remote instruments for surgery brings new challenges. One problem is to provide a remotely operated motor mechanism that supports a remotely operated actuator that can be positioned relative to a patient. These features are quite heavy and may weigh between 12 and 24 kilograms. The mechanism must be moved over the patient and carefully positioned. Therefore, it is necessary to balance the surgical instrument, the associated actuator, and the support structure so that the surgical instrument can be safely and easily positioned. The constant force spring is made of stainless steel strip, so that when it is rolled up relative to being stretched, the spring will relax in a low stress state. When it unfolds, the restoring force mainly comes from the part close to the loosened spring coil. Specifically, the force comes from the region that transitions from a circle to a plane. The force does not come from the part of the drum that is fully unfolded or still winding. The resultant force is almost constant because the geometry of this area...