Factory Power Spring

Factores que afectan la ruptura de resortes de potencia.

Hora:2022-9-15

The power spring is made of stainless steel strip. A spring box is required to limit its outer diameter. The spring center is connected with the shaft. When an external force is applied to make the shaft rotate relative to the spring, the spring will roll on the shaft center and store the torque. When the external force disappears, the spring will produce the torque on the shaft or spring box.     The advantage of power spring is that it can be divided into natural power spring and pre force power spring according to its relaxed shape. In contrast, the preloaded power spring can store 25% to 55% more torque and provide more effective turns. Power springs are mainly used in products such as clockwork toys, timers and automatic rewinding devices (such as power cord, dog puller, pipe winder and automobile safety belt)     It is often seen that the scroll spring purchased will break soon after it is applied to the product. Once the scroll spring breaks, its service life will end. If spring manufacturers choose general materials and immature production technology, the service life of products will be greatly reduced. There are many factors leading to its rupture, mainly including the following factors: wrong scheme design, shortcomings of raw materials, poor production and processing and so on. The quality of power spring determines the quality of products and user experience. Take the dog leasher with scroll spring as an example. With the increasing improvement of living standards, raising pets has become a fashion. In the process...

Power springs used in recoil start systems

Hora:2022-9-14

 Small engines are well known and are commonly used in lawn mowers and garden tractors and various other garden and lawn maintenance tools, in addition to other environments. Typically, each of these engines is equipped with a recoil starting system that includes a rope that rotates the starting mechanism to engage a flywheel that is connected to the engine for starting purposes. Once the rope starter is pulled, the recoil mechanism is always provided with the engine to reel the starter rope back to the starting mechanism.   The recoil portion of the starter mechanism is operated by a power spring that tensions when the operator pulls on the starter rope. Once the rope is fully pulled, the operator releases it. Most power springs on the market often fail, so the recoil rewinding mechanism needs to be disassembled and the spring replaced. And replacing the spring is a tedious task because the operator needs to keep the spring in the cavity inside the recoil starter pulley and then coil the spring into the pulley mechanism while keeping the spring in the coiled position and under sufficient tension. Such a procedure requires not only skill, but sometimes infinite patience. That's why the quality of the power spring is a top priority - after all, no one wants to change the power spring inside too often.   Shenzhen Qianye Precision Metal Co., Ltd. was established in 2006 to supply high-quality stainless steel springs for many fields. Through continuous efforts, 20 patent certificates and 4 spring equipment software copyrights have been granted by the State Intellectual Property Office, and an enviable...

Power spring solves the problem of insulin syringe

Hora:2022-9-14

Mention of diabetes, I think everyone is not strange. Data show that by the end of 2021, the total number of type 2 diabetes in China was about 120 million. When oral hypoglycemic agents are standardized and blood glucose control is still unsatisfactory, insulin injection is an inevitable choice for the treatment of type 2 diabetes. Many may not know that insulin injections require dedicated syringes. Some kids are worried. Does injection take technical issues into account ? Actually don 't worry at all, because what, because the use of the Qianye  power spring ! Qianye power spring can provide small and highly accurate drug dose. The quantitative drug is injected into the body through the spring fixed force, thrust and homing speed. The thrust distribution of the steel strip spring accurately matches the sliding force of the traditional syringe. It solves the problem of emission tolerance of the syringe and provides a high thrust demand for highly viscous solution.     The device of insulin injection pen consists of handle, needle cap body, trigger device, insulin needle, needle hole and dynamic spring. The trigger device is started by the button to make the spring inside the needle cap contract instantaneously, and the spring elasticity drives the needle to penetrate into the subcutaneous tissue at a certain depth instantly, so as to effectively relieve the fear and pain of the patients, reduce the trauma area, improve the treatment compliance, enable the patients to carry out effective site rotation injection, and improve the treatment effect.  The reason why insulin injection needs special syringes...

Design of Constant Force Spring in Spool Damper

Hora:2022-9-14

 When powered by a damped constant force spring mounted on the spool, there are several key principles that influence the design of linear motion applications. These principles support robust and consistent performance of products in a variety of applications, including automotive and aircraft interiors, industrial machine components, and many other user interface applications. The example components shown above will be cited as examples of the various design principles detailed below. This example assembly has a sliding drawer (shown in red) powered by a constant force spring mounted on a spool (spool in green; constant force spring shown in yellow) running within a mounting base (shown in grey), such as a central Console a car. A ratchet or door latch mechanism (not shown) can be implemented to allow the tray to be locked in place with a single press by the user. This example is a typical set of applications used in the automotive industry.        1. Preload spring        When a constant force spring is in its free state, it does not exert any force. As the spring stretches, the spring force rapidly increases from zero to nominal load. However, to avoid including this "accelerated" part of the work envelope, the design can use preloading. An example of preloading is shown in the figure below. Note that although the mechanism is retracted, the depicted spring is extended.        To include preload in the design, ensure that the spring extends a distance equal to the outer diameter of the coil during assembly in order to engage...

Advantages of Qianye carbon brush spring in motor

Hora:2022-9-14

There are many kinds of carbon brush springs. Wired carbon brush springs also have steel belt carbon brush springs. The linear type is mainly compression spring and torsion spring. These springs are traditional springs. At present, the more famous motor manufacturers or electrical appliance manufacturers have begun to use steel belt carbon brush coil spring in the motor. The traditional compression spring and torsion spring are relatively backward and are generally used in low-cost carbon brush devices. The only advantage is that the price is cheap, which is several times lower than that of steel strip spring. However, the use of traditional spring in medium and high-end motors greatly reduces the product quality and competitiveness. Compared with the motor using traditional spring, the coil spring motor is completely two different concepts and quality, and the sound produced by the operation of the two motors is also different, making the service life even more incomparable. The use of carbon brush spring greatly improves the service life and stability of the motor. The traditional type of spring is not only noisy but also environmentally friendly. However, there are few domestic manufacturers that can really do a good job in carbon brush spring. Carbon brush spring needs a long time of production experience to produce high-quality carbon brush spring. Shenzhen Qianye Precision Metal Co., Ltd. has more than ten years of product R & D, production and manufacturing experience, and various application designs and solutions of spring. The advantages of carbon brush spring produced by Qianye in motor application are as follows: 1 Shorten the outer diameter of the motor...

Constant force spring design for adjustable desk and monitor stand

Hora:2022-9-14

In order to conform to the height of ergonomics, adjustable desk and display bracket have been widely used in the market. These applications enable people to choose to work sitting or standing, and adjust the appropriate height of equipment to meet the needs of medical care. The application of these two products can not be separated from the constant force spring. Why is it inseparable? Because the function of lifting in the product is to use the principle of free lifting of constant force spring internally to design a lifter that can adjust the height at will. With the help of the tension of the spring, its height can be adjusted freely. Constant force springs are characterized by a large output force with little space requirement, applying an almost constant force throughout the stretch. The constant force spring also has the characteristics of short initial preload, that is, it can withstand the rated load at short elongation, and provide long elongation capability. All functions are ideal for use as a balancing function, not only for ergonomic height-adjustable desks and monitor stands, but also for various height-adjustment applications such as patient bedside tables, wall-mounted storage cabinets, monitor and keyboard integrations Medical workstation.     Furniture and Medical Device Design Engineers If you think a constant force spring is a good fit for your application, here are some factors to consider during the design phase of your project.       1. Load conditions     Constant force springs generate force as the material stretches. The rated maximum working length of the constant force spring. This means that the maximum...

Traditional power springs and preloaded springs

Time:2022-9-3

Traditional power springs and preloaded power springs are fabricated from spring steel bars to provide torque. Spring steel is a low alloy, medium carbon steel or high carbon steel with a very high yield strength. Objects made of spring steel can return to their original shape despite significant bending or twisting. Power springs use flat (unstressed) steel windings, while pre-stressed power springs use pre-stressed steel to produce a larger range of usable torque than conventional power springs.          During the manufacturing process, the spring is wound into the retaining ring or the customer's housing (the retaining ring is pictured below). When ready for final installation, carefully install the spring into its housing with the outer end attached to the outer edge and the inner end attached to the mandrel (see photo below). During operation, the housing or mandrel will be fixed while the other component is free to rotate. Depending on the requirements of your specific design, it may be beneficial to use a fixed mandrel/free box or free box/fixed mandrel arrangement.        These springs are typically used to retract the cord or cable of the spool. You might see it in lawn mowers, retractable lanyards, or dog leashes. This is also the type of spring used to drive many mechanical clocks and timers, which is why they are sometimes called "clock springs". The load provided by the spring increases with the cross-sectional area of ​​the material. The number of turns the spring can provide depends on the space available between the mandrel and the...

Do you know function of the spring in fire damper?

Hora:2022-9-14

What do you think when you see the fire damper? I believe many people will think of "fire". In fact, the word "fire" must be familiar to everyone! What do you think of when you hear this word? People trapped by the raging fire? Or the scene of our brave firefighter uncle fighting the fire? The following are the fire events in recent days. At 14:00 on March 12, 2022, a fire broke out in the oil fume pipeline of a hotel in Huazhou City. At 3:46 on March 8, 2022, a fire broke out at the construction site of Jinke Xiangsheng Yueyuan at the intersection of chegang road and Xiyun road in Zhenjiang new area. In the early morning of March 14, 2022, a fire broke out in Kundulun District of Baotou City, which has killed 7 people so far. Do you feel very sad at this time? Uncontrolled fire is always a serious risk. In an emergency situation a fire can spread via a ventilation ductwork. Therefore it is essential that the ventilation ductwork is equipped with high-quality and robust fire dampers that also prevent smoke from spreading and therefore enable safety for escape routes. But what is a fire damper?     Fire Dampers are used in air transfer openings, ducts and other places where fire rated structures (e.g. walls, floors or other fire barriers) are penetrated. If these openings wouldn’t be protected, the fire would easily spread to other spaces and damage the property and pose a danger to people working/being in this environment. The idea...