Maison > double torsion springs suppliers
"Constant force spring" is a necessary component for cable accessory manufacturers at home and abroad
"Constant force spring" is a necessary component for cable accessory manufacturers at home and abroad
With the increasing application of cold shrinkable cable accessories, constant force spring has become a necessary component for cable accessories manufacturers at home and abroad. How to find a suitable constant force spring in practical application? How to determine the continuous elasticity, magnetism and corrosion resistance of constant force spring has become the first consideration for cable accessory manufacturers and customers. Whether imported brand or domestic brand, the use of constant force spring for standard cable accessories has become a standard configuration, but the quality is uneven. Faults often occur due to factors such as material, type selection or performance. The corrosion resistance of constant force spring is related to the material and processing technology. The corrosion resistance of stainless steel mainly comes from chromium. The corrosion resistance of steel will be greatly improved only when the chromium content exceeds 12%, and the addition of nickel will also improve the corrosion resistance. Constant force spring for cable is generally made of stainless steel 301 in China...
Application de Power Spring dans une station-service
Application de Power Spring dans une station-service
The gas station is a familiar place for everyone. Do you find that the lines of the gas gun are all exposed when passing through the gas station or entering the gas station to refuel? They look messy and unsafe. The car needs to refuel, so you have to go to the gas station to refuel. With the continuous growth of car owners, the passenger flow of gas stations is also increasing. Have you seen the news of the gas station explosion? After a car in a gas station was refueled, due to the negligence of the Refueller, the Refueller did not take out the refuelling gun from the fuel tank port, and the driver of the owner did not check the surrounding conditions of the car, so he started the car. Then the car drove the refueling gun and oil line, pulled down the refueling end connected with it, and caused an explosion. This kind of news is very...
Why is the support important for people to face the display for a long time?
Why is the support important for people to face the display for a long time?
What do you think of the correct sitting posture in office? Relax your shoulders, keep your eyes in front, and keep your eyes balanced at the top of the computer or the top 3 / 1 of the monitor. This is the correct sitting posture of our office. To stand our neck, we need a certain height of the display. The horizontal position of the display is low, and the neck is easy to tilt forward. The cervical spine will obviously feel uncomfortable, very tired, and will cause pressure on the muscles of the neck.      The display bracket is mainly composed of upper support arm, lower support arm, display connector and desktop clamp. The most important core lifting components are in the upper support arm, which supports the display through the deformation of spring or air rod structure in the upper arm. When it comes to the spring in the core lifting part, the reason why the display...
The Key Role Of Motor Brush Spring In Wind-Turbine Design
The Key Role Of Motor Brush Spring In Wind-Turbine Design
Wind-turbines are proven to create reliable and pollution-free energy, and as technology innovates, the cost to develop and manufacturer them is only becoming more affordable. Research demonstrates that to get the most return on turbines, whether onshore or offshore: the bigger the turbine, the better. There are two reasons for this: larger rotors and blades increase the total potential production capacity of the turbine, while higher fixtures and blades are higher in the atmosphere, increasing the power it can actually produce. These two factors are the driving forces behind the efficiency of wind turbines and their ability to create renewable energy. However, in order to achieve this goal, the manufacture of wind turbines requires the use of dozens of parts, components and materials. Motor brush or carbon brush is a small and important part of wind turbine design.  An important part of wind turbine motor brush is motor brush spring. These springs play a key role in the efficient operation of...
Constant force spring responsible for pushing nails in a nail gun
Constant force spring responsible for pushing nails in a nail gun
At present, the nail gun is frequently used in the construction industry or wood industry. The nail gun is a commonly used hand-held tool with a wide variety of types. According to the power source nail gun can be divided into pneumatic and electric two categories. When users are working, they often need to change different tools in their hands. Therefore, in order to facilitate the work, a hook is set up in the nail gun, so that users can hang the nail gun in the waist at work. When using the nail gun, you should pay attention not to face people, because the power of this product is still relatively strong and the risk is relatively high. If you are not careful, you will hurt others, and the consequences are still serious. You should also take protective measures when using it yourself. The driving device of the nail gun uses a constant force spring, because the constant force spring has the characteristic...
double torsion springs suppliers Product
 Ressort à force constante
Ressort à force constante
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Ressort de puissance
Ressort de puissance
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
 Services d'assemblage et de montage
Services d'assemblage et de montage
Qianye Company fournit non seulement la production de ressorts de précision, mais se concentre également sur la conception structurelle et les solutions fonctionnelles de l'ensemble du système de ressorts, et peut fournir un ensemble complet de production et d'assemblage de systèmes.
 Ressort à torsion constante
Ressort à torsion constante
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
 Ressort de balai de charbon
Ressort de balai de charbon
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Service de conception d'optimisation
Service de conception d'optimisation
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.
double torsion springs suppliers News
 3 types of springs and some common applications
3 types of springs and some common applications

Heure:2022-9-14

Smooth Range of Motion: Constant Force Springs Constant force springs provide a smooth range of motion and constant load, meaning they do not follow Hooke’s law. They are uniform in length and coiled into a permanent diameter. Constant force springs are frequently used for applications that require counterbalancing, including windows. In fact, window balance springs are one of our most successful products. In addition, the springs we manufacture are often designed for medical devices and aerospace applications. Their smooth range and steady motion control enhance instrument articulation.   High Torque with Little Rotation: Spiral Torsion Springs Spiral torsion springs are another popular product we manufacture.These springs are ideal for applications that require high torque and less than 360 degrees of rotation. (270 degrees maximum is preferred). Spiral torsion springs are commonly used in applications that require a “return to center” function, like a medical instrument joystick. They’re also ideal for electric motors and automotive applications. If your application requires this “return to center” function, developing a custom spiral torsion spring may be the best solution. Torque with Significant Rotation: Power Springs Power springs (also referred to as clock springs) are appropriately named due to their rotational energy that takes the form of torque. The torque increases as the spring is wound tighter. They are wound around an arbor or shaft and are retained in a housing. Their large rotation capabilities make them an ideal spring for a number of automotive applications or medical devices. Power springs are also frequently used for counterbalance mechanisms in industrial sectors. Custom vs. Stock Springs: Which are Best for You? As you begin to develop...
 Do you know what springs are used as stop mechanisms?
Do you know what springs are used as stop mechanisms?

Heure:2022-9-14

We often find that the spring we make is wrongly used as a stop mechanism in the design. This design defect can occur in all types of springs, including constant force spring, constant torque spring and power spring. For example, consider a simple cable extension product in which the spring retracts the cable into the housing. If the spring is completely wound before the cable is fully deployed, the spring will be used as a stop mechanism. This action will damage the function of the spring and components and should be avoided at all costs. Here are some useful tips when considering the stop mechanism. Constant Force Spring Application:  Initial designs often show the inner end of a Constant Force Spring attached to its’ spool. This is not necessary.  If the spool is larger than the natural spring diameter, the spring will automatically fit tightly on the spool.  In the case when a screw is attached to the spool, additional concerns arise.  If the spring is pulled tight on the screw,  a hump will result that will not only make the retraction difficult but will cause a fracture point and reduce life cycles. To avoid this, we recommend that the spool maintain 1-1/2 wraps of spring material at the furthest extension.  If these additional wraps are not practical in the design, another method of stopping the rotation is required. Constant Torque Spring Applications:   This type of motor spring is commonly used to retract a cable or to keep a constant torque rotational force on a spool.  It is extremely important not...
 Types of Springs in Medical Devices
Types of Springs in Medical Devices

Heure:2022-9-14

Springs are integral components in the manufacture of many medical devices. Whether it’s for a surgical stapler or a medical monitor, the types of springs in medical devices are defined by a specific action or movement required for the application. Though relatively simple in its design, springs store the mechanical energy necessary for a wide range of medical devices, machinery, and equipment to function properly. Any type of surgical instrument, medical equipment or device that has a mechanism undoubtedly has a spring component. Spring material must be medical grade, and the design and function of any device must adhere to stringent regulatory requirements and guidelines as defined by the FDA. Booms, table and bed lifts, fluid control devices, wheelchairs, medical testing and monitoring equipment either fixed or mobile, MRI and X-ray machinery, dental x-ray with articulated arms, medical equipment drawer closing mechanisms, anesthetic infusion devices, sterilization valves, various implants, and shunt valves are all examples of medical devices that require springs to function. Manufacturers of medical devices and devices subsequently relied heavily on springs in a variety of applications. The medical industry relies on the same types of springs that most industries rely on—constant force springs, constant torsion springs, power springs. Constant force spring Constant force springs are coiled with stainless steel tape so that when coiled relative to being stretched, the spring relaxes in a low stress state. When it is unrolled, the restoring force comes mainly from the portion close to the unwinding spring coil. The resultant force is almost constant. The actuators that operate in the surgical...
 Factory power springs: how to choose high quality power springs, the usefulness of springs
Factory power springs: how to choose high quality power springs, the usefulness of springs

Time:2022-11-21

Power springs are a variation of coil springs that provide high force output with minimal force requirements. Power springs are sometimes called clock springs because they are often used to power certain types of clocks. Power springs are capable of high force output with very small space requirements and, when extended, store power indefinitely. This allows power springs to be used in a variety of applications. We can manufacture power springs in a variety of styles and sizes. This includes working with all the different types of materials, thicknesses, base widths, heights, lengths and screw sizes. With this complete selection of styles, we can manufacture the power spring that best fits your application needs.     We can ensure your power springs meet your requirements and specifications for any intended application. This will ensure proper performance and system durability. As a leading spring manufacturer, our top priority is quality. Therefore, all of our power springs are engineered and manufactured to meet or exceed your expectations and tolerances. Power springs are used to store and release rotational energy. Learn More About Power Spring Manufacturing To learn more about power spring applications or to speak to our staff about engineering and manufacturing custom power springs to fit your needs, contact us today. As a leading spring manufacturer, we can provide customized spring manufacturing solutions to meet all your needs.   Springs come in all shapes and sizes, but no matter how they look, they work the same way. Each spring is an elastic object, meaning it stores and interprets reactive energy. Spring...
 Why are variable force springs used in shelf thrusters?
Why are variable force springs used in shelf thrusters?

Time:2022-9-3

  Variable force springs are very common in the point-of-purchase or POP industry, especially in shelf pushers. Variable force springs provide variable force to precisely match increasing or decreasing force requirements, propelling the product horizontally forward. Due to their wide applicability, these springs can be seen in the tobacco, cosmetic, electronics and medical industries. So why use variable force springs in shelf thrusters?        1. Inventory Control        Variable force springs are commonly used in trays that push products forward in a controlled manner. Variable-force springs in the push-in trays aid product fronts, so the shelves are always well-stocked. These trays allow for more organized store inventory and help track inventory needs. This is even more critical in today's COVID-conscious environment.        2. Product integrity        Variable force springs are designed around the weight of the product they push. This ensures that the product is never slammed or damaged when it is selected. Variable force springs allow most products to be pushed with a consistent force regardless of item weight. At Qianye Precision, we understand the importance of displaying products in high-end retail spaces. We take this into account in every design.         3. Customer Satisfaction        Variable force springs make shopping easier for consumers because products are displayed in a more organized and aesthetically pleasing manner. Products include cosmetics, nutraceuticals and pharmaceuticals, beverages, food, and anything suitable for retail display.          In terms of the design of the variable force spring under consideration, because...
 Power springs applied in barbell weightlifting protection devices
Power springs applied in barbell weightlifting protection devices

Heure:2022-9-14

 Barbell is a kind of core training sports training equipment, which is also used in weight lifting. Barbell sports is a kind of weight training. Barbell training equipment can be used to improve muscle strength training, and barbell can also be used for core training to promote overall coordination. The barbell is heavier than other fitness equipment, which is also prone to accidents. The existing barbell lacks corresponding protective measures when used, which is easy to hurt users or damage the barbell. The above problems can be solved by the power spring. Add the barbell weight lifting protection device of the power spring. The utility model relates to the technical field of fitness equipment, including a base plate, and also includes: a placing table connected with the base plate; Barbell, butting with the placing table; One end of the protection mechanism is connected with the placing table, and the other end is connected with the barbell. The protection mechanism comprises an inductor, a linkage component and a clamping component; The holding mechanism is connected with the barbell. Athletes hold the barbell through the holding mechanism to exercise, and the barbell drives the linkage component to move. When the human body is released, the barbell drives the linkage component to move quickly under its own gravity. When the sensor senses that the linkage component moves faster, the sensor starts the operation of the clamping component, and the clamping component clamps the linkage component, hinders the movement of the linkage component, and then hinders the movement of the barbell, so as to protect the...
 Do you know about the constant force spring module?
Do you know about the constant force spring module?

Heure:2022-9-14

 I'm sure many of you know what a constant force spring is, right? A constant force spring is a spring that maintains a constant spring force for a specific stroke, also called a constant force spring, and is used in a linear motion, usually using its rebound force. A constant force spring consists of a spiral-shaped metal sheet that is bent on the inside so that each coil is wound tightly around the innermost coil of the metal sheet. When the metal sheet is stretched, the internal stress resists the load force, which is exactly the same as a normal extension spring, but the spring force is very constant and can output a nearly linear spring force.   The use of a constant force spring on the lift support enables the supported structure to hover over gravity at any position during the allowable travel.   However, in order to achieve a variety of functions and operations, the supported structure, such as a monitor, usually weighs more than the white body of the device. In order to ensure a large support force, the constant force spring needs to use a thick elastic metal sheet. However, the thick elastic metal sheet will lead to a short effective constant force spring travel.   The purpose of this constant force spring die set is to provide a constant force spring die set that is capable of maintaining a large constant force lift value and a constant force effective stroke within an effective mounting space. Another purpose is to provide a constant force spring lift mechanism that not only provides a greater constant lift force, but also reduces the mounting space of...
 Ressorts à force constante appliqués dans les accessoires muraux
Ressorts à force constante appliqués dans les accessoires muraux

Heure:2022-9-14

As more and more people spend more and more time using computers, computer users spend more time sitting or standing at their desks or workstations in front of devices. Keeping what experts call "the best ergonomic positioning" can improve energy levels and overall comfort. For this purpose, the input and output devices must be placed in appropriate positions. The proper position can reduce the muscle strain of the user's arm and effectively prevent various musculoskeletal diseases, including carpal tunnel syndrome, neck pain, and upper and lower back pain.   The attachment bracket can be used to facilitate the support and position adjustment of the fixed attachment. The attachment retainer allows simple three-dimensional adjustment of two such devices to place the devices in a more ergonomic relative position to meet the needs of various users and workspaces, and has a balancing mechanism for balancing the weight of fixed attachments.   The balance mechanism provided by the wall mounted accessories is superior to the traditional lifting system, because the balance mechanism allows the bracket to move a larger vertical distance for vertical position adjustment. The constant force spring is used to balance the weight of the accessory, screw balance, pulley balance or other low friction devices installed on the accessory retainer by engaging with the roller assembly. The roller assembly can be raised or lowered by the user along the track with minimum force. The weight of the mounting accessories supported by the roller assembly is basically balanced by the balance mechanism. When the user moves the roller assembly vertically up or down, the constant force spring is wound or unfolded...