Casa > Computer Monitors Springs
Application of constant force spring in refrigerator door
Application of constant force spring in refrigerator door
In order to make the refrigerator operate effectively, the door should be kept closed. Keep the door open for a short time when putting or taking out food. However, opening it for a long time will affect its cooling and endanger food safety. It will also lead to excess power consumption. Fortunately, the modern refrigerator door can be added with a constant force spring to automatically close after you open the refrigerator for use. Nowadays, this kind of design is relatively rare in the market. It is generally a magnetic refrigerator door, which explains why the magnet is attached to it.   We have seen that it is essential to keep the refrigerator door closed all the time. If the door remains open for a long time, it will counteract the internal temperature balance and affect the quality of the food stored in it.When this situation continues for a long time, the compressor cannot maintain a low internal temperature. This undermines...
Application of power spring in draw-wire encoder
Application of power spring in draw-wire encoder
A draw-wire encoder, also known as a string potentiometer, pull wire position sensor, cable extension displacement sensor, or yo-yo potentiometer. It is a cable driven position or displacement sensor for linear position measurement and velocity using a flexible cable (wire) and a spring loaded spool.   The string pot or cable extension sensor is composed of four main components in the shell: 1. High strength stainless steel cable (rope or steel wire rope); 2. Equal diameter spool (drum); 3. Power spring with high torque and long service life; 4. Rotary potential precision sensor.   In the shell of the sensor, a soft high-strength stainless steel cable is tightly wound on a precision machined cylindrical drum (or spool) with constant diameter, which rotates with the winding and unfolding of the measuring cable. In order to maintain the tension and retraction of the steel wire, the spring is connected to the drum. Then connect the spool to the shaft of the rotary potential precision sensor (or encoder). When the...
Application of power spring in electric vehicle charging station
Application of power spring in electric vehicle charging station
As the times change, gas stations are gradually replaced by electric vehicle charging stations. We have always been a natural partner for designers and manufacturers of electric vehicle charging stations, because they need to be compact, clean and provide trouble free cable management solutions for their electric vehicle charging stations around the world.   By applying our power spring to the retractable cable drum, the cable wear is reduced, the tangled cable is eliminated, and the cable can be neatly stored when not in use. In this way, we help EV charging station developers shape the future of safe and trouble free charging of electric vehicles. The natural expansion trend of the power spring gives a torque to the spindle or case, resulting in a usable torque. The generated torque is cumulative, so the torque will increase as the spring is tightened and decrease as the spring is loosened. Torque and total number of turns are the most important output requirements in the design of power...
Power springs used in recoil start systems
Power springs used in recoil start systems
 Small engines are well known and are commonly used in lawn mowers and garden tractors and various other garden and lawn maintenance tools, in addition to other environments. Typically, each of these engines is equipped with a recoil starting system that includes a rope that rotates the starting mechanism to engage a flywheel that is connected to the engine for starting purposes. Once the rope starter is pulled, the recoil mechanism is always provided with the engine to reel the starter rope back to the starting mechanism.   The recoil portion of the starter mechanism is operated by a power spring that tensions when the operator pulls on the starter rope. Once the rope is fully pulled, the operator releases it. Most power springs on the market often fail, so the recoil rewinding mechanism needs to be disassembled and the spring replaced. And replacing the spring is a tedious task because the operator needs to keep the spring in the cavity inside...
Variable Force Springs In New Point Of Purchase Display
Variable Force Springs In New Point Of Purchase Display
Automatic advance shelves are more widely used in stores and people's lives, and are more often used for displaying and placing goods (incense hata, rosemary, etc.). However, the conventional shelf propeller has one end of the baffle on both sides fixed and the other end movable. Although in use, after the first row of goods is taken away, the second row of goods will be automatically pushed to the first row, which can save the staff's finishing time, but in the process of pushing the goods, it is easy to cause the goods in the back row to pop out of the display slot due to the activity of the ends of the shelf advancer on both sides of the stopper, which brings inconvenience to the use.   To provide a new type of shelf propeller for the problem of the shortcomings of the existing technology. The new shelf propeller includes a base plate, a side plate, a push plate...
Qianye Precision Cordless Blind Spring
Qianye Precision Cordless Blind Spring
 Imagine, on the weekend of a busy work week, unloading from work, taking a hot bath, having a leisurely dinner, and when it's time to rest, draw the curtains to isolate the noisy world outside, and then, beautiful and beautiful Sleeping until you wake up naturally, this is not the most important thing for every office worker.   However, for families with children, curtains have increasingly become a new safety hazard, especially for families with roller shutters. The pull rope of the roller blind is usually closed at the bottom or the side. If it is not fixed, the rope will slide down to form a loop, which is easy to wrap around the neck of the child, causing the child to suffocate, and even lead to death in severe cases. It is reported that there are many cases of suffocation and death of children due to rope entanglement accidents every year, mostly children under the age of 4. The...
Una molla a coppia costante può svolgere un ruolo così importante nel dispositivo di raccolta
Una molla a coppia costante può svolgere un ruolo così importante nel dispositivo di raccolta
Constant torque springs can help take up the wire and are used in many products. All electrical products have a cord set that is connected to the power supply, but this power cord will bring some trouble to our arrangement. The function of the constant torque spring is this, it can bring a free shrinkage process to the electrical cord set , making it easy to take up the line, very practical. When the external force reverses the constant torque spring from the natural state to the output wheel, once the external force is removed, the constant torque spring will be rolled back to the natural state, and a constant torque will be generated in the output wheel at the same time. Constant torque spring can be used in automatic winding, balance weight and power source, such as automatic winding device of power line. Advantages of constant torque spring over power spring: 1. The torque will not change as the number of turns increases. 2. There is no limit on the number of...
Computer Monitors Springs Product
 Molla per spazzole di carbone
Molla per spazzole di carbone
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Primavera di potenza
Primavera di potenza
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
 Servizi di montaggio e montaggio
Servizi di montaggio e montaggio
Qianye Company non fornisce solo la produzione di molle di precisione, ma si concentra anche sulla progettazione strutturale e sulle soluzioni funzionali dell'intero sistema di molle e può fornire un set completo di produzione e assemblaggio del sistema
 Molla a forza variabile
Molla a forza variabile
Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.
 Molla a forza costante
Molla a forza costante
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Molla a torsione costante
Molla a torsione costante
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
Computer Monitors Springs News
 Constant Force Springs
Constant Force Springs

Ora: 14-9-2022

The extension type of Constant Force Spring represents the most basic, yet most versatile, type of constant force spring. It is a pre-stressed flat strip of spring material which is formed into virtually constant radius coils around itself or on a drum. When the strip is extended (deflected) the inherent stress resists the loading force, the same as a common extension spring, but at a nearly constant (zero) rate. A constant torque is obtained when the outer end of the spring is attached to another spool and caused to wind in either the reverse or same direction as it is originally wound. The full rated load of the spring is reached after being deflected to a length equal to 1.25 times its diameter. Thereafter, it maintains a relatively constant force regardless of extension length. The load is basically determined by the thickness and width of the material and the diameter of the coil. Qianye Spring  offers a stock of constant force springs in a variety of life cycle ranges. Each spring is a coil of high-yield Type 301 stainless steel band that exerts a nearly constant binding force to resist unwinding. We can also provide custom constant force springs to your specifications.        Guide to Mounting Constant Force Springs         A Constant Force Spring is usually mounted by first tightly wrapping it on a drum, then attaching the free end to the loading force such as in a counterbalance application. This relationship can also be reversed. 1.The drum diameter should be 10% to 20% larger than its natural inside diameter. 2.One...
 Do you know about the constant force spring module?
Do you know about the constant force spring module?

Ora: 14-9-2022

 I'm sure many of you know what a constant force spring is, right? A constant force spring is a spring that maintains a constant spring force for a specific stroke, also called a constant force spring, and is used in a linear motion, usually using its rebound force. A constant force spring consists of a spiral-shaped metal sheet that is bent on the inside so that each coil is wound tightly around the innermost coil of the metal sheet. When the metal sheet is stretched, the internal stress resists the load force, which is exactly the same as a normal extension spring, but the spring force is very constant and can output a nearly linear spring force.   The use of a constant force spring on the lift support enables the supported structure to hover over gravity at any position during the allowable travel.   However, in order to achieve a variety of functions and operations, the supported structure, such as a monitor, usually weighs more than the white body of the device. In order to ensure a large support force, the constant force spring needs to use a thick elastic metal sheet. However, the thick elastic metal sheet will lead to a short effective constant force spring travel.   The purpose of this constant force spring die set is to provide a constant force spring die set that is capable of maintaining a large constant force lift value and a constant force effective stroke within an effective mounting space. Another purpose is to provide a constant force spring lift mechanism that not only provides a greater constant lift force, but also reduces the mounting space of...
 The spring in the timer
The spring in the timer

Ora: 14-9-2022

Timer is a precise timing device, which uses mechanical clock to drive the switch. Its time positioning is very accurate, and it can achieve such effect. Spring plays a great role in it. The emergence of timers has brought great changes to our lives. At first, we used the hourglass to determine the time. In modern life, timers have been widely used, enabling people to control time more easily, and even have been applied in military aspects such as time bombs and time detonators. The timer mainly includes three parts. The first part is the power component, spring one-way mechanism, can only tighten, not loose. Tightening the spring provides power for the whole system. The second part is the release component. By a series of gear speed, the number of rotation cycles increases when the spring is relaxed. At the end of the gear system, there are grab wheels, grab claws and swimming wires to ensure that the gear system rotates at a constant speed driven by the spring. There is a device on the swimmer to adjust the length of the swimmer to adjust the swing frequency of the grab claw to ensure that the gear rotates at the set speed, and the tightened spring won 't be loosened at once, nor is it affected by the spring tightness resulting in changes in speed. The third part is timing trigger device, so that a gear in the gear group turns to a certain angle to send a mechanical signal, control interruption. When the timer is screwed to a certain...
 Do you know the principle of medical cart?
Do you know the principle of medical cart?

Ora: 14-9-2022

During the normal operation of the hospital, it is often necessary to use the medical cart. The medical cart refers to the ward protection and transfer of medical equipment. The medical cart prevents the patient from causing further injury in the process of transporting the patient. At the same time, it also reduces the labor intensity of medical staff or family members. It is a commonly used medical device. At present, the medical cart on the market can only be used in the process of lifting the patient from the hospital bed to the cart or from the cart to the hospital bed, The scope of use is narrow, which is easy to cause a waste of resources and the problem of single function. Therefore, a medical multifunctional cart is proposed to solve the above problems. The medical multifunctional cart has simple structure and convenient operation. It can be used as a medical cart under normal working conditions. Drugs for medical use can be placed in the medicine box, and medical waste generated in the medical process can be placed in the garbage box. The turnover cover plate can close the garbage box to prevent the garbage in the garbage box from shaking or overflowing due to the movement of the cart. The operator rotates the rotating rod and turns the connecting rod and pulley out of the shell, When the pulley is in contact with the ground, the operator pushes the cart, and the cart can be moved freely with the help of the pulley. When the hospital lacks...
 The power spring makes the tape measure shrink freely
The power spring makes the tape measure shrink freely

Ora: 14-9-2022

Tape measure, I believe everyone is familiar with it. Tape measure is a common measuring tool in our daily life and work. After the tape measure is pulled out, it can be rolled up because there is a power spring in the tape measure. When pulling out to measure the length, it actually lengthens the length of the scale and spring. Once the measurement is completed, the spring in the tape measure will automatically shrink, and the tape will also shrink under the action of spring force, so the tape measure will roll up. The power spring is an elastic fitting in the tape measure. The end of the steel bar scale is connected to the front end of the spring, and the end of the spring is fixed in the middle of the tape measure. The tape measure mainly uses the energy storage characteristics of the spring, which can be said to be the conservation of mechanical energy .When you pull the tape measure, you work on the internal spring, and the energy is stored by the power spring; when you release it, the spring relaxes, releasing energy and causing the tape measure to retract automatic contraction uses the lever torque principle: in the stretching state, the force arm is the smallest and the spring output is the largest; in the retracted state, the force arm is the largest and the spring output is the smallest.         When the scale is pulled out, the spring is tightened to produce a force to roll back. When the tension of the scale is released,...
 Applicazione delle molle a forza variabile negli espositori per la vendita al dettaglio
Applicazione delle molle a forza variabile negli espositori per la vendita al dettaglio

Time:2022-9-3

Variable force springs are very common in the point-of-purchase or POP industry, especially in shelf pushers. Variable force springs provide variable force to precisely match increasing or decreasing force requirements, propelling the product horizontally forward. Due to their wide applicability, these springs can be seen in the tobacco, cosmetic, electronics and medical industries. So why use variable force springs in shelf thrusters?         1. Inventory Control        Variable force springs are commonly used in trays that push products forward in a controlled manner. Variable-force springs in the push-in trays aid product fronts, so the shelves are always well-stocked. These trays allow for more organized store inventory and help track inventory needs. This is even more critical in today's COVID-conscious environment.         2. Product Integrity        Variable force springs are designed around the weight of the product they push. This ensures that the product is never slammed or damaged when it is selected. Variable force springs allow most products to be pushed with a consistent force regardless of item weight. At Qianye Precision, we understand the importance of displaying products in high-end retail spaces. We take this into account in every design.         3. Customer Satisfaction Variable force springs make shopping easier for consumers because products are displayed in a more organized and aesthetically pleasing manner. Products include cosmetics, nutraceuticals and pharmaceuticals, beverages, food, and anything suitable for retail display.         In terms of the design of the variable force spring under consideration, because the...
 Design steps of constant torque spring
Design steps of constant torque spring

Tempo: 15-9-2022

Constant torque spring is a constant force spring with special force moving between two spools. The spring is stored on the storage spool and wound reversely on the output spool. When released, torque is obtained from the output spool when the spring returns to its natural curvature on the storage spool. The spring does not need to be connected to the storage spool. The spring can be installed in a cavity without storing the spool at all. However, friction will then be introduced and torque requirements will change. The torque generated by the constant torque spring will increase slightly after several revolutions. Constant torque, even negative torque, is also possible. Negative gradients of up to 50% can be achieved in some applications. As for the design of constant torque spring, when considering the use of constant torque spring, it is strongly recommended that you talk with Qianye engineers and study various design parameters. Some initial design calculations can be carried out according to the following eight steps. 1. Select materials Most of the springs we produce are made of type 301 stainless steel. This material is readily available and predictable. Thousands of industry engineers can assist in selecting standard sizes to speed up the process. We also use high carbon steel, Inconel and Elgiloy in various designs as needed. 2. Life expectancy This is one of the most important considerations because the life of constant torque springs is very predictable. Practical is important because it is estimated that high life cycle requirements may lead to larger and more expensive designs. Of...
 Do you know what springs are used as stop mechanisms?
Do you know what springs are used as stop mechanisms?

Ora: 14-9-2022

We often find that the spring we make is wrongly used as a stop mechanism in the design. This design defect can occur in all types of springs, including constant force spring, constant torque spring and power spring. For example, consider a simple cable extension product in which the spring retracts the cable into the housing. If the spring is completely wound before the cable is fully deployed, the spring will be used as a stop mechanism. This action will damage the function of the spring and components and should be avoided at all costs. Here are some useful tips when considering the stop mechanism. Constant Force Spring Application:  Initial designs often show the inner end of a Constant Force Spring attached to its’ spool. This is not necessary.  If the spool is larger than the natural spring diameter, the spring will automatically fit tightly on the spool.  In the case when a screw is attached to the spool, additional concerns arise.  If the spring is pulled tight on the screw,  a hump will result that will not only make the retraction difficult but will cause a fracture point and reduce life cycles. To avoid this, we recommend that the spool maintain 1-1/2 wraps of spring material at the furthest extension.  If these additional wraps are not practical in the design, another method of stopping the rotation is required. Constant Torque Spring Applications:   This type of motor spring is commonly used to retract a cable or to keep a constant torque rotational force on a spool.  It is extremely important not...