> Fans Spring
Spiral spring design: the forgotten part of mechanical design
Spiral spring design: the forgotten part of mechanical design
Spiral springs are often taken for granted in mechanical design, but they are an essential component in many applications. In fact, spiral springs can be used to achieve a wide range of motion and force characteristics, making them a versatile choice for many applications.     What are spiral springs and what are they used for? Spiral springs are one of the most common types of springs. They are made from a coiled wire that is formed into a spiral shape. Spiral springs are used in a variety of applications, including automotive, industrial, and consumer products. They are used for a variety of purposes, including providing compression, tension, and torsion. The history of spiral springs The spiral spring is a unique invention that has a long and interesting history. Though the first spiral springs are believed to have been invented in China, they didn't become popular until the 1700s, when they were used in clocks and watches. In the 1800s,...
Everything You Need to Know About Seat Belts Springs
Everything You Need to Know About Seat Belts Springs
Seat belts and springs are both important parts of a car. Seat belts keep you safe in case of an accident, while springs keep the car in shape. It's important to know how to use both of these parts properly. What are seat belts and springs, and what do they do? A seat belt is a device used to secure the occupant of a vehicle in a sitting position. A seat belt consists of two straps, one running over the shoulder and chest, the other between the legs. The purpose of a seat belt is to distribute the force of a collision over the entire body, thereby reducing the likelihood of injury. A spring is a device used to store energy and release it in a controlled manner. Springs are used in a wide variety of applications, including automotive suspensions, door hinges, and shoe laces. How do seat belts and springs work? When you press down on a seat belt,...
ゼンマイの破断に影響を与える要因
ゼンマイの破断に影響を与える要因
The power spring is made of stainless steel strip. A spring box is required to limit its outer diameter. The spring center is connected with the shaft. When an external force is applied to make the shaft rotate relative to the spring, the spring will roll on the shaft center and store the torque. When the external force disappears, the spring will produce the torque on the shaft or spring box.     The advantage of power spring is that it can be divided into natural power spring and pre force power spring according to its relaxed shape. In contrast, the preloaded power spring can store 25% to 55% more torque and provide more effective turns. Power springs are mainly used in products such as clockwork toys, timers and automatic rewinding devices (such as power cord, dog puller, pipe winder and automobile safety belt)     It is often seen that the scroll spring purchased will break soon after it...
コンスタント フォース スプリングでより大きな力を発生させる方法
コンスタント フォース スプリングでより大きな力を発生させる方法
A common way to install a constant force spring is to use two or more springs to obtain greater force in a narrow space. This may be necessary if the diameter or width of a single spring exceeds the allocated space, but there is room to add multiple smaller springs. When engaging multiple springs, a much smaller spring design can be used. The total force is the sum of the spring forces.       When combining springs, it is recommended to use the same spring for multiple installation. Compared with using two or more completely different springs to realize the load, this method is more economical and the design will be simpler. Since the force is the sum of the springs, the total force required should be evenly distributed between the number of springs used. We will discuss three different mounting methods for use with multiple springs.         1、 Back to back method The back-to-back method uses two...
高精度ばねの設計技術
高精度ばねの設計技術
 Spring to ensure good elastic performance, that is, absorb a lot of elastic energy without plastic deformation; Sufficient plasticity and toughness to prevent impact fracture. According to the stress nature, the spring can be divided into tension spring, compression spring, torsion spring and bending spring. According to the shape, it can be divided into dish spring, ring spring, plate spring, spiral spring and truncated cone scroll spring.       The design process of spring has the following points:      1. Device space: design a compression spring, clearly understand the space required to install the spring, and then you can master the basic manufacturing conditions, outer diameter, inner diameter and free length of a compression spring.      2. Movable stroke load: the design of compression spring to clearly understand the position to be actuated and the elastic force to be carried. Determine the position and know the required elasticity, then you can determine the material, wire diameter and number of...
定荷重ばねの長さの決め方
定荷重ばねの長さの決め方
  Constant force springs are mechanical devices used in applications that typically require some kind of balance or retraction mechanism. In design and function, constant force springs differ from the more common types of coil springs. They apply a consistent linear force or torque that remains constant over a wide range of motion. When a coil spring is under force, whether it is stretched, compressed, or rotated, it produces a force proportional to its stretch. How a spring responds when a force is applied or released is called spring deflection. Years of experience tell us what happens when a spring is released from its temporary state. We know that the spring will return to its original position, but it will be proportional to the force exerted on it before releasing. A spring has a restoring force that allows the elastic material to return to its original state - the equilibrium position after the applied force is removed. Stretching, squeezing or twisting, what...
パワースプリングの使用に直接影響する要因は何ですか?
パワースプリングの使用に直接影響する要因は何ですか?
A power spring is a mechanical part that uses elasticity to work. Parts made of elastic materials deform under the action of external force, and return to their original shape after the external force is removed. Also known as "winding spring". The production process of the clockwork spring manufacturer can be completed at one time from simple procedures to complex procedures, and it is equipped with online testing equipment to produce high and stable products. Generally made of spring steel. The types of clockwork springs are complex and diverse. According to the shape, there are mainly spiral clockwork springs, clockwork springs, plate clockwork springs, special-shaped clockwork springs, etc.    Power Spring Application:    The application category is generally used in clocks, recording instruments, motor toys, tape measures, car starter     motors, storage wire boxes, etc.     Power spring classification:     The plane power springs are classified according to whether they are in contact with the adjacent working parts:     ...
Fans Spring Product
 パワースプリング
パワースプリング
特徴: パワー スプリングは鋼帯で巻かれています。外径を制限するためにスプリングボックスが必要です。スプリングの中心はシャフトに接続されています。シャフトとスプリングが互いに回転するように外力が加えられると、スプリングはシャフトに巻き付けられてねじれが蓄積され、外力がなくなると、スプリングはシャフトまたはスプリングボックスにねじれを発生させます。利点:パワースプリングは、リラックスした形状に応じて、天然パワースプリングとプレストレストパワースプリングに分けられます。それに対し、プリフォースタイプのパワースプリングは25%~55%ほど多くのトルクを蓄えることができ、より効果的なターンが得られます。製品製作範囲:厚さ0.05~0.85mm、幅2.0~60mm。シーンの原理:高精度のペン型注射器は、独自のパワースプリングを使用して、少量で高精度の薬物投与を提供します。一定量の薬がバネの力で体内に注入され…
 カーボンブラシスプリング
カーボンブラシスプリング
特徴: 1.一定の力により、カーボンブラシと整流子の長さに関係なく、圧力は同じままです。 2. 一定の力のばねはカーボン ブラシの損失を減らし、カーボン ブラシの生命を延長し、電流損失を減らします。へ 3. 小型モータは、モータの外径を小さく設計できます。 4.カーボンブラシの長さを長くすることができます。 5.より大きな整流子を使用できます。 6.火花を減らし、電磁干渉を減らします。シングル ロール カーボン ブラシの定荷重スプリング 1. カーボン ブラシの幅 2. カーボン ブラシの高さ: スプリングの幅は、カーボン ブラシの高さよりも小さくする必要があります 3. アブレイダブル カーボン ブラシの長さ: スプリング ストロークは、アブレイダブルの長さよりも大きくする必要がありますカーボン ブラシ 4. カーボン ブラシと整流子に必要な接触圧力: 必要なばね力 二重巻きカーボン ブラシの定荷重ばね 1. カーボン ブラシの幅 2. カーボン ブラシの高さ: ばねの幅は、...
 可変力バネ
可変力バネ
特徴: 可変力ばねと可変ねじりばねの外観は、定荷重ばねと定ねじりばねに非常に似ています。可変力ばねと可変ねじりばねは、従来のばねに対するフックの法則の影響を打ち破ることができるため、ストロークと力は比例して増加しなくなりますが、負の勾配の段階的な一定の力など、さまざまな弾性力と変位の組み合わせを実現できます。エンジニアリング要件については、弾性力と変位ストロークの関係を使用して、特定のアプリケーションでのさまざまな弾性曲線の変化を設計します。さまざまな可変力ばね、可変ねじりばねのアプリケーション設計、およびソリューションがあります。可変力ばねと可変ねじりばねの製造範囲:厚さは0.05〜0.85mm、幅は2.0〜65mmです。
 最適化設計サービス
最適化設計サービス
製品のアイデア、設計から完成品の製造まで、お客様がそれらを完成させるのを支援し、お客様がスプリングの使用に関する専門的な観点から製品を最適化し、製品開発をスピードアップし、市場投入までの時間を短縮するのに役立ちます。スプリング コンポーネントの設計、製造、最終組み立ての初期段階から、顧客は Qianye が得られる利点を選択します。 1. 製品開発時間を節約する 2. さまざまなソリューションを提供し、目的の最適化ソリューションを選択する 3. 製品に最適なスプリングを選択する 4. 生涯にわたってサービスを提供し、テクニカル サポートを満足させます。
 組み立ておよび取り付けサービス
組み立ておよび取り付けサービス
Qianye Company は、精密ばねの製造を提供するだけでなく、ばねシステム全体の構造設計と機能ソリューションにも焦点を当てており、システムの製造と組み立ての完全なセットを提供できます。
 定荷重ばね
定荷重ばね
特徴:コンスタントフォース(コンスタントフォース)スプリングはステンレス鋼帯を巻いたものです。高強度鋼帯は、特定の製造用ばね装置によって成形されます。外力がそれらをまっすぐにすると、バネは自然に巻き戻り、弾力性を生み出しますが、私たちに届きますゴールは、シフトされた後、指定した開始点に戻ることができます。利点: 従来のワイヤ スプリングに対するコンスタント フォース スプリングの利点: 1. 非常に小さな設置スペースで、非常に高い弾性出力を実現できます。 2. すべてのストロークで一定の弾力性を維持します。 3.プリストロークストロークが短く、必要な弾力性を得るために必要なストロークはわずかです。 4.元の長さはワイヤースプリングよりも短く、ストロークは無制限です。 Dingli Clockwork の製造範囲: 厚さは 0.05 ~ 0.85 mm、幅は 2.0 ~ 60 mm です。シーンの原理:定荷重ばねは、長いストロークで一定の力を維持する特性があり、...
Fans Spring News
 Qianye の革新的なパワー スプリングはホース リールで重要な役割を果たします
Qianye の革新的なパワー スプリングはホース リールで重要な役割を果たします

時間:2022-9-14

Hose Reel is also called pipe winder, Winder, reel, drum and air drum. Among many working equipment, the pipe winder is a very labor-saving and convenient long-distance energy transmission device. Its basic structure consists of hose, power spring, rotating shaft and other safety mechanisms.         The power spring of the hose reel can stretch and shrink the pipeline, intensively manage various energy pipelines, and change the previous phenomenon that the pipeline, power plug, oxyacetylene pipeline, bulb, spray gun and other tools are scattered in disorder. It can be used alone or in combination, which greatly saves the factory space, beautifies the working environment and improves the grade of the enterprise. Improve the working environment. The power spring is made of rolled steel strip. A spring box is required to limit its outer diameter in use. The center of the spring is connected with the shaft. When an external force is applied to make the shaft rotate relative to the spring, the spring will roll on the shaft center and store torque. When the external force disappears, the spring will produce torque on the shaft or spring box. The tension on the spring has been pre loaded at the factory, and the spring produced by an improperly selected manufacturer may become unstressed or have excessive tension. Too much tension will lead to too fast and fierce retraction. At the same time, the service life will be relatively short, and the elasticity will soon fail.         Our company has made technical product updates for power springs. First of all, our company adopts 301 stainless steel with...
 Qianye Precision のドッグ ウォーカー
Qianye Precision のドッグ ウォーカー

時間:2022-9-14

As everyone who knows our company knows, our company also has another product, that is, dog walker! The power spring is the core and main component of the dog walker. The power spring is made of 301 stainless steel with high precision and high hardness. Its thickness tolerance is controlled in the range of 0.01mm and its hardness is hv580 degrees. The service life of the dog walker can be extended to 30000 to 100000 times. When this power spring is applied to the dog walker, the quality of the dog walker has been greatly improved. When walking the dog, we need to pay attention to bring the dog's little partner - the dog walker, and then the obedient dog should also bring the dog walker. Don't expect the bridge section of the dog looking for the master in the movie to happen. Before using this kind of traction rope, I always used a fixed 1.5m long rope. Usually I use the traction rope to prevent dogs from running around and attacking pedestrians. But there was once a time when walking a dog. Now many shared bicycles and electric vehicles often shuttle back and forth at a fast speed when walking around the corner. An electric motorcycle brushed past the dog. Fortunately, after the rope was shortened, it was able to effectively protect the dog and prevent accidents. However, many friends would say that it would be good to buy a shorter rope? But in fact, many times we need to give dogs enough range of activities, so this time can reflect...
 パワースプリングは、シャンデリアの自由な昇降を実現できます
パワースプリングは、シャンデリアの自由な昇降を実現できます

時間:2022-9-14

Chandelier is a common lighting fixture, which is widely used in offices, exhibition halls, living rooms, restaurants and other places. It is very popular because of its beauty. But now common chandeliers are generally installed with fixed hanging height. If you want to adjust the hanging height of the lamp, you can only adjust it manually. The adjustment process is complex. Therefore, a chandelier with simple structure and convenient installation that can automatically adjust the hanging wire has emerged. The chandelier that can automatically adjust the hanging wire realizes that the height can be adjusted only by lifting the lamp body up or pulling it down. When the lamp body is at the hanging height position, the hanging wire can automatically adjust the retractable length of the hanging wire through the adjuster. The hanging height of the lamp can be adjusted by adjusting the lamp body.    A chandelier that can automatically adjust the hanging wire, including the hanging wire, the hanging wire automatic adjuster, the lamp body, and the ceiling box. The lamp body includes an LED light source and a driving power supply; the automatic suspension wire adjuster is built into the ceiling plate, one end of the suspension wire is stored in the wire receiving groove of the automatic suspension wire adjuster, and the other end is removed from the ceiling box cover. The wire trough leads out through holes and is connected and fixed with the lamp body; the suspension height position of the lamp body of the chandelier is the suspension height position maintained by...
 ホースリールのパワースプリング
ホースリールのパワースプリング

時間:2022-9-14

Transmission hoses and wires are necessary for automotive production and maintenance work, but they are time-consuming and labor-intensive to sort out after use. Another common problem is safety when handling them. This can cause serious injury if the operator is inexperienced. Bulky and unwieldy hoses are also an added risk, especially if they are too short for the job. This forces the operator to move into dangerous positions that can cause injury.   The hose reel now solves these problems by incorporating the maneuverability of the power spring, allowing the long hose to automatically retract after use and align itself continuously and neatly when retracted. In addition, considering the limitations of floor layout and staffing, the hose reel with the addition of the scrolling bar can make full use of space and improve the workplace environment. After use, the hose or wire is retracted to the winder for storage, and generally will not break, and low friction, which can extend the service life of the hose or wire. The tension on the power spring is pre-loaded at the factory, and springs produced by improperly selected manufacturers may become untensioned or over-tensioned. Too much tension can lead to fast and violent retraction as well as a short life span, and the elasticity can fail quickly.   Therefore, it is recommended that manufacturers of hose reels look for high-quality spring manufacturers, because the current reel winding function of the emergence of a deep expansion of the advertising market, so that more electrical products are constantly in the upgrade to create new product selling points. Choosing the right...
 遠隔手術用ブレーキに適用される定荷重ばね
遠隔手術用ブレーキに適用される定荷重ばね

時間:2022-9-14

Minimally invasive medical technology is used to reduce the number of foreign tissues that may be damaged during diagnosis or surgery, so as to reduce the recovery time, discomfort and adverse side effects of patients. The surgeon can operate the controller on the console to indirectly operate the instrument connected to the remotely operated actuator. The instrument can be disassembled from the remotely controlled actuator, so that the instrument can be disinfected separately and selected to be used as the instrument required for surgery. Combine. Instruments may be changed during surgery.   Using remote instruments for surgery brings new challenges. One problem is to provide a remotely operated motor mechanism that supports a remotely operated actuator that can be positioned relative to a patient. These features are quite heavy and may weigh between 12 and 24 kilograms. The mechanism must be moved over the patient and carefully positioned. Therefore, it is necessary to balance the surgical instrument, the associated actuator, and the support structure so that the surgical instrument can be safely and easily positioned. The constant force spring is made of stainless steel strip, so that when it is rolled up relative to being stretched, the spring will relax in a low stress state. When it unfolds, the restoring force mainly comes from the part close to the loosened spring coil. Specifically, the force comes from the region that transitions from a circle to a plane. The force does not come from the part of the drum that is fully unfolded or still winding. The resultant force is almost constant because the geometry of this area...
 How to choose double torsion springs suppliers, what is double torsion springs
How to choose double torsion springs suppliers, what is double torsion springs

Time:2022-11-21

A torsion spring is a coil spring that stores and releases angular energy or holds a mechanism in place. They feature two legs extending from each end of the coil and are used in applications requiring torque or rotational force. This is accomplished by attaching the legs to external components. Then, as the elements rotate around the spring, the spring tries to push them back to their original position. Torsion springs come in a variety of different shapes and sizes, with different leg configurations and lengths, for a wide range of applications. Typical uses include automotive door handles, garage doors, clothespins, bulldog clips and hinges. In some cases, a single torsion spring cannot exert enough force. In these cases, a double torsion spring may be required.     What is a double torsion spring? As the name implies, a double torsion spring is characterized by two torsion spring coils joined at the center to form one spring. The two coils are made of a wire wound in opposite directions, one counterclockwise and the other clockwise. The two parts work in parallel, like a torsion spring, with the spring legs normally pressing against the outer assembly, which pushes the outer assembly back, creating resistance. The shaft or rod usually passes through the center of the two coil bodies.   Dual torsion springs are stronger than single torsion springs and can apply more force. The resulting force is equal to that of two separate springs combined. Depending on the application, the bridge and legs connecting the two coils can be made in...
 定荷重スプリングダンパー
定荷重スプリングダンパー

時間:2022-9-14

Dampers are widely used in building structures to dissipate energy and reduce vibration. However, the traditional damper has complex structure, poor durability and corrosion resistance, and low working stability. After using for a period of time, the damper is prone to aging and deformation can not be restored, so it can not be used anymore. Most of the existing dampers use shape memory alloy (SMA), which is a material composed of more than two kinds of metal elements through thermoelasticity, martensitic transformation and its inversion; Using shape memory alloy, the damper can automatically restore to its original shape after deformation, which is used for the restoration of building structures after deformation. However, the existing dampers only use the performance of shape memory alloy (SMA) wire itself, and the cost is expensive, which is not conducive to the large-scale use of dampers.   The design of constant force spring can be added to the self resetting damper. The damper includes piston parts, U-shaped plates and moving rods. The constant force spring is set between the tension moving rod and the pressure moving rod. The constant force spring tightens the tension moving rod and the pressure moving rod to be close to each other, so that the tension moving rod and the pressure moving rod respectively lean against the end close to each other in the corresponding sliding hole. It is conducive to the large-scale use of self resetting dampers. Constant force spring is a kind of functional material with high ductility, which has the advantages of constant load, high energy storage density, low friction loss and so on....
 Qianyeパワースプリングを使用したフォールアレスタ
Qianyeパワースプリングを使用したフォールアレスタ

時間:2022-9-14

The fall arrester is also called the speed difference device, which is a protective product. It is suitable for safety protection when the crane is hoisted to prevent the suspended workpiece from accidentally falling. It can effectively protect the life safety of ground operators and the damage of the suspended workpiece. It is used in metallurgical automobile manufacturing, petrochemical industry, engineering construction, electric power, and ships. , Communications, pharmacy, bridges and other high-level workplaces. The protective effect of the protective device product must pass. The power spring has a retractable function and is an ideal part of the gravity dissipator used in the dropper. The anti-fall system is connected between the fixed points of the cable harness, and they can stop the user from falling in the first time. Even when the power spring is fully deployed, the gravity dissipator of the dropper can prevent the user from being hit in the event of a fall. The advantages of Qianye power springs are divided into natural power springs and pre-force power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. When using Qianye power spring as its parts in normal use, the safety rope will expand and contract freely with the human body. Under the action of the mechanism in the device, it is in a semi-tensed state, so that the operator has no sense of worry. In the event of a fall, the pulling speed of the safety rope will be significantly increased,...