> torsion springs
車のカバーのデザインのパワースプリング
車のカバーのデザインのパワースプリング
Car covers are commonly used automotive protective articles, but the folding and storage of car covers is a troublesome thing. In order to solve this problem, invention lovers have done a lot of useful exploration and put forward many solutions. One kind of scheme is to use power to drive the reel to directly roll up the car cover cloth. Using the reel to directly roll up the car cover cloth can achieve the purpose of rapid retraction of the car cover, but there are the following problems in actual use: first, the winding and friction of the reel when directly rolling up the car cover cloth wear the car cover cloth greatly; second, in order to adapt to the width of the car cover cloth, the width of the car cover retracting device must be close to the width of the car cover cloth. If it is too narrow, it will increase the winding of the car cover cloth,...
風車スリップリングブラシホルダーへのカーボンブラシスプリングの適用
風車スリップリングブラシホルダーへのカーボンブラシスプリングの適用
In order to prevent accidents caused by excessive wear of the carbon brushes on the collector device of the slip ring brush holder of the wind turbine, a normally closed switch-type alarm unit is configured for each carbon brush, and these alarm units are connected in series to the alarm. In the prior art, the grounding brush is held on the structure using a coil spring pressure finger lever structure. In order to ensure sufficient pressure after the carbon brush is worn, the initial pressure of the spring has to be increased, which aggravates the wear of the carbon brush. However, in the later stage of carbon brush wear, the tension of the coil spring becomes insufficient again, resulting in poor contact between the carbon brush and the slip ring, frequent beating, resulting in breakage; at the same time, from the carbon brush to the alarm unit, the intermediate link is complex and easy to Lead to false alarm or no alarm, reducing the...
無線機における定トルクばねの応用
無線機における定トルクばねの応用
With the increasing attention of human beings to environmental issues in the process of social progress, green and low-carbon has become a popular new trend, and energy-saving and environmental protection technologies and products continue to emerge, which are affecting and changing our lives. Hand power generation is a green way of energy supply. The generator powered by the radio contains a constant torque spring motor. When tightening the spring, the spring is gradually wound onto the larger drum, and the mechanical energy obtained during winding is converted into potential energy and stored in the spring. When the spring is released, the stored energy passes through the gear transmission device and the rotating motor to generate output voltage, which is then adjusted by the zener diode to supply power to the radio in the form of a plug.   Constant torque spring motor is a prestressed spring material belt, which forms a coil and is stored on a small storage drum. Then fix the...
Application of power spring in speed difference crash arrester
Application of power spring in speed difference crash arrester
The speed difference anti-fall device can quickly brake and lock falling objects within a limited distance, which is suitable for cargo hoisting and protects the life safety of ground operators and the damage of the lifted workpiece. It is suitable for safety protection to prevent the workpiece from being lifted accidentally when the crane is hoisted. It can effectively protect the life safety of ground operators and the damage of the workpiece to be lifted. It is used in metallurgical automobile manufacturing, petrochemical industry, engineering construction, electricity, ships , communications, pharmaceuticals, bridges and other high-altitude workplaces.   So do you know how the speed difference crash arrester works?   When there is no solid structure above the operating point for fixing the safety rope, the working platform cannot be set up temporarily, and it is inconvenient to use the safety belt at the same time, the differential fall arrester can be used, which is also a supplement and improvement to...
Custom springs for medical devices
Custom springs for medical devices
For most of the past two decades, the medical device industry has been booming. Healthcare research has led to the rapid expansion of specific devices used to treat medical needs, from rare to common. These devices range from simple to surprisingly complex, often including automatic sensors, computer monitoring, and even remote monitoring by healthcare providers. When you are designing for a new medical device, it is essential to consider the components you must put together and the system they will create. This means breaking down your design to a level where you can visualize the components that need to go into the project. This means designing each spring assembly individually after evaluating the available options. To help you solve this problem, here are the four most commonly used springs for medical devices and their current common applications.    Constant force springs Constant force springs provide a smooth range of motion and a constant load in either extending or retracting direction. This...
Qianye Spring は、シェルフ スラスターを同業者から目立たせます。
Qianye Spring は、シェルフ スラスターを同業者から目立たせます。
Supermarkets and convenience stores can be seen everywhere in the streets and alleys. More and more people are developing retail sales. Businesses will think of the question "How can we overcome each other and stand out in the competition of peers". If you want to stand out from the peers, innovation is indispensable. Now many large shopping malls will install shelf pushers on the shelves, which is not only convenient for customers but also convenient for tally staff, killing two birds with one stone. According to tests, the installation of automatic rack pushers can increase turnover and save labor. Traditionally, the products on the shelves are usually placed in order. When a customer buys the product, it is difficult for the customer to see the product at the back. And install the automatic propeller, after the customer buys the product, the propeller will automatically advance the product in the back, when the customer wants to find the product, it is...
シャワールームがどんなに狭くても、バススツールを設置することをお勧めします
シャワールームがどんなに狭くても、バススツールを設置することをお勧めします
No matter how small the shower room is, it is also recommended that you install a bath stool directly on the wall, which is stable and convenient! I've seen a social news before. It's about a pregnant woman who took a bath at home and slipped and had an accident. To be honest, no one wants this to happen, but because many detailed problems were not paid attention to during the decoration, it led to a series of problems! In fact, when decorating the shower room, we must take safety measures. Not only families with elderly, children and pregnant women, but also ordinary people need a safe environment for bathing. After all, the shower room is a place with large water consumption. It doesn't pay to fall and hurt! The first step of safety measures is to choose anti-skid bricks on the ground. Secondly, for families with elderly, children and pregnant women, it is best to install a bathing stool....
torsion springs Product
 定荷重ばね
定荷重ばね
特徴:コンスタントフォース(コンスタントフォース)スプリングはステンレス鋼帯を巻いたものです。高強度鋼帯は、特定の製造用ばね装置によって成形されます。外力がそれらをまっすぐにすると、バネは自然に巻き戻り、弾力性を生み出しますが、私たちに届きますゴールは、シフトされた後、指定した開始点に戻ることができます。利点: 従来のワイヤ スプリングに対するコンスタント フォース スプリングの利点: 1. 非常に小さな設置スペースで、非常に高い弾性出力を実現できます。 2. すべてのストロークで一定の弾力性を維持します。 3.プリストロークストロークが短く、必要な弾力性を得るために必要なストロークはわずかです。 4.元の長さはワイヤースプリングよりも短く、ストロークは無制限です。 Dingli Clockwork の製造範囲: 厚さは 0.05 ~ 0.85 mm、幅は 2.0 ~ 60 mm です。シーンの原理:定荷重ばねは、長いストロークで一定の力を維持する特性があり、...
 カーボンブラシスプリング
カーボンブラシスプリング
特徴: 1.一定の力により、カーボンブラシと整流子の長さに関係なく、圧力は同じままです。 2. 一定の力のばねはカーボン ブラシの損失を減らし、カーボン ブラシの生命を延長し、電流損失を減らします。へ 3. 小型モータは、モータの外径を小さく設計できます。 4.カーボンブラシの長さを長くすることができます。 5.より大きな整流子を使用できます。 6.火花を減らし、電磁干渉を減らします。シングル ロール カーボン ブラシの定荷重スプリング 1. カーボン ブラシの幅 2. カーボン ブラシの高さ: スプリングの幅は、カーボン ブラシの高さよりも小さくする必要があります 3. アブレイダブル カーボン ブラシの長さ: スプリング ストロークは、アブレイダブルの長さよりも大きくする必要がありますカーボン ブラシ 4. カーボン ブラシと整流子に必要な接触圧力: 必要なばね力 二重巻きカーボン ブラシの定荷重ばね 1. カーボン ブラシの幅 2. カーボン ブラシの高さ: ばねの幅は、...
 組み立ておよび取り付けサービス
組み立ておよび取り付けサービス
Qianye Company は、精密ばねの製造を提供するだけでなく、ばねシステム全体の構造設計と機能ソリューションにも焦点を当てており、システムの製造と組み立ての完全なセットを提供できます。
 可変力バネ
可変力バネ
特徴: 可変力ばねと可変ねじりばねの外観は、定荷重ばねと定ねじりばねに非常に似ています。可変力ばねと可変ねじりばねは、従来のばねに対するフックの法則の影響を打ち破ることができるため、ストロークと力は比例して増加しなくなりますが、負の勾配の段階的な一定の力など、さまざまな弾性力と変位の組み合わせを実現できます。エンジニアリング要件については、弾性力と変位ストロークの関係を使用して、特定のアプリケーションでのさまざまな弾性曲線の変化を設計します。さまざまな可変力ばね、可変ねじりばねのアプリケーション設計、およびソリューションがあります。可変力ばねと可変ねじりばねの製造範囲:厚さは0.05〜0.85mm、幅は2.0〜65mmです。
 定ねじりばね
定ねじりばね
特徴:固定(定)トルクバネ(スプリング)はステンレス製です。外力により、ぜんまいが自然な状態から出力車に巻き戻されます (エネルギー貯蔵)。外力を取り除くと、ばねは自然な状態に戻ります。同時に、一定のトルク力(蓄えられた弾性力)が出力輪に発生(解放)されるので、定トルク発生装置と呼ばれます。ストリップ。 (定荷重ばねにおける使用方法)に属する 利点:動力(スクロール)ばねと比較した固定トルクばねの利点: 1. 回転数の増加によりトルクが変化しない。 2.使用できるターン数に制限はなく、多ターンターンの設計は固定トルクスプリングを採用することがほとんどです。 3.無効回転数が少なく、より多くのエネルギーを蓄えることができ、効率が高くなります。固定トルクバネの製作範囲:厚さ0.05~0.85mm、幅…
 最適化設計サービス
最適化設計サービス
製品のアイデア、設計から完成品の製造まで、お客様がそれらを完成させるのを支援し、お客様がスプリングの使用に関する専門的な観点から製品を最適化し、製品開発をスピードアップし、市場投入までの時間を短縮するのに役立ちます。スプリング コンポーネントの設計、製造、最終組み立ての初期段階から、顧客は Qianye が得られる利点を選択します。 1. 製品開発時間を節約する 2. さまざまなソリューションを提供し、目的の最適化ソリューションを選択する 3. 製品に最適なスプリングを選択する 4. 生涯にわたってサービスを提供し、テクニカル サポートを満足させます。
torsion springs News
 従来のパワー スプリングとプリロード スプリング
従来のパワー スプリングとプリロード スプリング

時間:2022-9-14

   Traditional power springs and preloaded power springs are fabricated from spring steel bars to provide torque. Spring steel is a low alloy, medium carbon steel or high carbon steel with a very high yield strength. Objects made of spring steel can return to their original shape despite significant bending or twisting. Power springs use flat (unstressed) steel windings, while pre-stressed power springs use pre-stressed steel to produce a larger range of usable torque than conventional power springs.        During the manufacturing process, the spring is wound into the retaining ring or the customer's housing (the retaining ring is pictured below). When ready for final installation, carefully install the spring into its housing with the outer end attached to the outer edge and the inner end attached to the mandrel (see photo below). During operation, the housing or mandrel will be fixed while the other component is free to rotate. Depending on the requirements of your specific design, it may be beneficial to use a fixed mandrel/free box or free box/fixed mandrel arrangement.        These springs are typically used to retract the cord or cable of the spool. You might see it in lawn mowers, retractable lanyards, or dog leashes. This is also the type of spring used to drive many mechanical clocks and timers, which is why they are sometimes called "clock springs". The load provided by the spring increases with the cross-sectional area of ​​the material. The number of turns the spring can provide depends on the space available between the mandrel and the...
 調節可能なデスクとモニター スタンド用の定荷重スプリング設計
調節可能なデスクとモニター スタンド用の定荷重スプリング設計

時間:2022-9-14

In order to conform to the height of ergonomics, adjustable desk and display bracket have been widely used in the market. These applications enable people to choose to work sitting or standing, and adjust the appropriate height of equipment to meet the needs of medical care. The application of these two products can not be separated from the constant force spring. Why is it inseparable? Because the function of lifting in the product is to use the principle of free lifting of constant force spring internally to design a lifter that can adjust the height at will. With the help of the tension of the spring, its height can be adjusted freely. Constant force springs are characterized by a large output force with little space requirement, applying an almost constant force throughout the stretch. The constant force spring also has the characteristics of short initial preload, that is, it can withstand the rated load at short elongation, and provide long elongation capability. All functions are ideal for use as a balancing function, not only for ergonomic height-adjustable desks and monitor stands, but also for various height-adjustment applications such as patient bedside tables, wall-mounted storage cabinets, monitor and keyboard integrations Medical workstation.     Furniture and Medical Device Design Engineers If you think a constant force spring is a good fit for your application, here are some factors to consider during the design phase of your project.       1. Load conditions     Constant force springs generate force as the material stretches. The rated maximum working length of the constant force spring. This means that the maximum...
 医療用カートの原理を知っていますか?
医療用カートの原理を知っていますか?

時間:2022-9-14

During the normal operation of the hospital, it is often necessary to use the medical cart. The medical cart refers to the ward protection and transfer of medical equipment. The medical cart prevents the patient from causing further injury in the process of transporting the patient. At the same time, it also reduces the labor intensity of medical staff or family members. It is a commonly used medical device. At present, the medical cart on the market can only be used in the process of lifting the patient from the hospital bed to the cart or from the cart to the hospital bed, The scope of use is narrow, which is easy to cause a waste of resources and the problem of single function. Therefore, a medical multifunctional cart is proposed to solve the above problems. The medical multifunctional cart has simple structure and convenient operation. It can be used as a medical cart under normal working conditions. Drugs for medical use can be placed in the medicine box, and medical waste generated in the medical process can be placed in the garbage box. The turnover cover plate can close the garbage box to prevent the garbage in the garbage box from shaking or overflowing due to the movement of the cart. The operator rotates the rotating rod and turns the connecting rod and pulley out of the shell, When the pulley is in contact with the ground, the operator pushes the cart, and the cart can be moved freely with the help of the pulley. When the hospital lacks...
 機械アームに定荷重スプリングを追加して、より安定させます
機械アームに定荷重スプリングを追加して、より安定させます

時間:2022-9-14

Adjustable mechanical arms are commonly used in offices, laboratories, studios and other locations to support objects at various angles and heights, such as lights, computer screens, laboratory instruments, microphones, etc.   The adjustable manipulator consists of a base member and two connecting rods connected through a pivot joint, which are held in place by friction in the joint. By using spring assisted balancing devices that compensate for most of the weight, the amount of friction required to keep the equipment in place is reduced.   The pivot is a connecting ring that can rotate around an axis set at the pivot point, and a way to attach a spring to the pivot point to reduce the amount of force required. Apply to the arm to place the supported object in the desired position. The auxiliary balance device uses a constant force spring, because the constant force spring provides a smooth range of motion and a constant load in the extension or retraction direction. This can provide smooth motion and force requirements that predict the smallest detail, and the force applied by the constant force spring is more constant over the entire range of motion of the two arms of the device. If coil spring balance is used, a constant force may not be applied to the supported object at all positions of the upper arm part and the lower arm part. For example, at the far end of the range of motion, usually, the force applied to the supported object is insufficient or too large, making it difficult and troublesome to place the...
 長時間ディスプレイに向き合うためには、なぜサポートが重要なのでしょうか。
長時間ディスプレイに向き合うためには、なぜサポートが重要なのでしょうか。

時間:2022-9-14

What do you think of the correct sitting posture in office? Relax your shoulders, keep your eyes in front, and keep your eyes balanced at the top of the computer or the top 3 / 1 of the monitor. This is the correct sitting posture of our office. To stand our neck, we need a certain height of the display. The horizontal position of the display is low, and the neck is easy to tilt forward. The cervical spine will obviously feel uncomfortable, very tired, and will cause pressure on the muscles of the neck.      The display bracket is mainly composed of upper support arm, lower support arm, display connector and desktop clamp. The most important core lifting components are in the upper support arm, which supports the display through the deformation of spring or air rod structure in the upper arm. When it comes to the spring in the core lifting part, the reason why the display can rise and fall is that it is designed into a lifter that can adjust the height of the display at will by using the principle of free rise and fall of constant force spring. With the help of the tension of the spring, its height can be adjusted freely. Compared with the column support (the lifting up and down is cumbersome, and the screws need to be adjusted by tools every time) it is simpler to use and more convenient to operate after adding a spring. It only needs a little effort to complete the adjustment, which can be said...
 ブラシスプリングプロテクター
ブラシスプリングプロテクター

時間:2022-9-22

       Conventional motor arrangements include a rotor with windings to conduct current during machine operation. As the rotor rotates, current is conducted through the rotating elements from sources external to the rotor to the rotor windings. A rotating element such as a slip ring or a commutator contacts the brush spring to conduct current.        There are two main types of brush springs, single-coil brushes and double-coil brushes. The brush springs provide constant pressure to the commutator and slip rings while minimizing brush wear, burning and scratching. They provide excellent work at high speeds for improved motor performance. The brush spring is relative to the rotating element, and the brush spring is ground due to friction during use. It is damaged and needs to be replaced periodically. So sometimes the brushes are replaced during motor downtime. To change the brushes safely, the operator uses one hand (to avoid current passing through the operator's body). Brush carriers can be heavy and unwieldy, so brush replacement is not only difficult but dangerous.        A brush holder, brush handle assembly helps operators safely remove replacement brushes in electric machines or other rotating machines. A stationary support is included having at least one groove and a pronged electrical connector. The stationary support has a conductive strip for a portion of the body for being configured to pass through the stationary support. Its lead electrical piece is configured to provide electrical conductance with a collector base (collector base) and electrical fork connectors.        The brush retention structure...
 CTスキャンテーブルのスムーズな動きを実現する定荷重バネ
CTスキャンテーブルのスムーズな動きを実現する定荷重バネ

時間:2022-9-14

We are familiar with CT scanner. Now when we go to the hospital for examination, we often hear the doctor say "take a film first". This film generally refers to CT. Doing CT is not only for the safety of patients, but also for the safety of doctors. CT is much clearer than X-ray film. At the same time, there are many diseases that cannot be seen on B-ultrasound and can be diagnosed by CT. At present, CT is the most widely used imaging examination under medical treatment and the most valuable examination for clinical information. When you go to take CT, you lie down on the scanning table, and the scanning table will automatically move smoothly and accurately locate the position. Have you ever thought about this problem because you want to relieve tension? The CT scanner table can move smoothly and accurately because of the role of the constant force spring in it. Some little friends may not know what the constant force spring is. When it comes to the spring, everyone must think it is the traditional linear spring. In fact, it is not. Constant force spring is made of stainless steel strip. The high-strength steel strip is shaped through specific spring production equipment. When it is straightened by external force, the spring will naturally roll back and produce elastic force, However, to achieve our goal, we can return to our designated starting point after the shift. The constant force spring can achieve extremely high elastic output in a very small device space. Its function can be applied to products requiring linear motion such...
 スプリング サイクルの寿命を最大化するための 7 つのヒント
スプリング サイクルの寿命を最大化するための 7 つのヒント

時間:2022-9-15

Spring is a kind of mechanical part that uses elasticity to work. The parts made of elastic materials deform under the action of external force, and return to the original state after removing the external force. Also known as "spring". It is generally made of spring steel, and the types of springs are complex and diverse. The following tips to maximize the service life of the spring are also of great concern to you!     1. Lower Stress, The Better! In the early design stages of a spring, try designing with a larger wire diameter or a lower final load to allow more room for the spring to improve cycle life.     2. Shot Peening A shot peened spring can handle more stressful conditions than unpeened springs. This process can greatly improve performance and sustainability.     3. Keep Cool Spring relaxation or loss in spring load occurs faster in high temperature applications due to stress over time. Reducing operating temperatures can reduce the chances of spring relaxation.     4. Using The Right Material Material selection of a spring is key to good spring design. Consult with a Lee Spring Engineer to determine if upgrading to a higher tensile range or quality grade material can improve cycle life for a particular application.     5. Minimize Shock Loading Shock loading occurs when a load is applied with sufficient speed for the first coils of the spring to take up more of the load than what would be calculated for a static situation. The more times a spring...