With the development of society, buildings and roads are the cornerstone of the development of human society. People will choose to lay waterproof materials during waterproof maintenance, but people face some problems when laying waterproof materials. When laying waterproof materials, people inadvertently trample on the materials because they do not know that the materials have been laid, resulting in uneven laying of materials and economic losses.
Therefore, we need to protect the sites under construction and just completed construction when laying. Many of the existing protective devices are large, which is not conducive to people’s carrying, and the protective devices can’t be seen by people at night, causing people’s damage. The laying of water-proof materials is wasted, and the placement of protective devices is unbalanced, causing collapse and damage to people.
The protective device comprises two expansion columns 1, a contraction device 21, a second fixing block 4 and two expansion columns 1, one of which is provided with a contraction device 21. The retracting device 21 is composed of two rotating discs 12, the first fixed column 13 and the power spring 14. The rotating disc 12 is installed in the telescopic rod 1.
The protective device makes the shrinking device work by pulling the connecting belt to lengthen or shrink the length of the connecting belt. The shrinking device is composed of two rotating discs and the first fixed column is composed of scroll spring. When pulling the connecting belt, the scroll spring is tensioned by force. When pulling the connecting belt to a suitable position, the fixing device at the edge of the groove fixes the connecting belt. When using it, loosen the fixing device, and the scroll spring does not recover under force to drive the connecting belt to store, The shrinking device is conducive to shortening the connecting belt and helping people get the appropriate length of the connecting belt they want when using it.
Turn the stop block on the second fixed column, align the gap on the stop with the support column, pull out the support column, and three support columns are supported on the ground. The three support columns are conducive to the stability of the equipment, and the support column can also be used on the uneven bottom surface, effectively enhancing the stability of the equipment so that the equipment will not fall and cause harm to people. The surface of the connecting belt is equipped with a luminous belt, which is conducive to the use in the environment with unclear vision.
가변 포스 스프링은 구매 시점 또는 POP 산업, 특히 선반 푸셔에서 매우 일반적입니다. 가변 힘 스프링은 증가하거나 감소하는 힘 요구 사항에 정확하게 일치하도록 가변 힘을 제공하여 제품을 수평으로 앞으로 추진합니다. 광범위한 적용 가능성으로 인해 이러한 스프링은 담배, 화장품, 전자 및 의료 산업에서 볼 수 있습니다. 그렇다면 가변력 스프링을 사용하는 이유는 ...
When you walk into your office building on your way to work every day, or into your local bank, or any commercial facility, you may open a heavy glass door. When you cross the threshold, the door closes behind you, and you don't think about it. However, the heavy glass door was probably closed by a constant force spring. Constant force springs are...
A common way to install a constant force spring is to use two or more springs to obtain greater force in a narrow space. This may be necessary if the diameter or width of a single spring exceeds the allocated space, but there is room to add multiple smaller springs. When engaging multiple springs, a much smaller spring design can be used....
As the times change, gas stations are gradually replaced by electric vehicle charging stations. We have always been a natural partner for designers and manufacturers of electric vehicle charging stations, because they need to be compact, clean and provide trouble free cable management solutions for their electric vehicle charging stations around the world. By applying our power spring to the retractable cable...
Constant force spring, also known as hair spring, is made of stainless steel strip. The force added to the spring determines the diameter, force and life of the spring. The action of constant force spring is similar to that of stretching ribbon. The spring stretches and rolls back, and the working part is tangent to the spring ' s own...
A constant torque spring motor is a strip of prestressed spring material that forms a coil and is stored on a small storage drum. The free end is then pinned and rewound onto the larger output drum; this is the "winding" part of the constant torque spring cycle. When the output drum is released, the spring will return to the...