Constant force spring reel

Why is the support important for people to face the display for a long time?

시간:2022-9-14

What do you think of the correct sitting posture in office? Relax your shoulders, keep your eyes in front, and keep your eyes balanced at the top of the computer or the top 3 / 1 of the monitor. This is the correct sitting posture of our office. To stand our neck, we need a certain height of the display. The horizontal position of the display is low, and the neck is easy to tilt forward. The cervical spine will obviously feel uncomfortable, very tired, and will cause pressure on the muscles of the neck.      The display bracket is mainly composed of upper support arm, lower support arm, display connector and desktop clamp. The most important core lifting components are in the upper support arm, which supports the display through the deformation of spring or air rod structure in the upper arm. When it comes to the spring in the core lifting part, the reason why the display can rise and fall is that it is designed into a lifter that can adjust the height of the display at will by using the principle of free rise and fall of constant force spring. With the help of the tension of the spring, its height can be adjusted freely. Compared with the column support (the lifting up and down is cumbersome, and the screws need to be adjusted by tools every time) it is simpler to use and more convenient to operate after adding a spring. It only needs a little effort to complete the adjustment, which can be said...

일정한 힘 스프링 설계 가이드

시간:2022-9-14

There are many mechanical components to choose from for your device or application. If your device requires a spring, consider constant force springs. These are a type of extension spring. They do not obey Hooke’s law, so their force remains constant, even when deflected. Because of their flat force curve, constant force springs are suitable for applications that require a smooth range of motion and a constant load. Learn more about this type of spring to see if it could work in your device or application. Constant Force Spring Benefits There are many benefits of constant force springs that make them suitable for a number of applications: Have small space requirements Provide a smooth range of motion Have no inertia to overcome Mount to existing hardware Produce a counterbalance effect For these reasons, constant force springs are versatile enough to work for a number of applications in which a constant load is required to counterbalance, tension, retract or dispense. This is why they’re frequently used to enhance surgical devices, deploy and retract doors on aircrafts, and counterbalance windows.   Design Considerations If you decide that constant force springs are ideal for your application, here are some considerations to think about in the design phase of your project. Load Conditions Constant force springs produce a force as the material is extended. Constant force springs are rated at a maximum operating length. This means that the maximum travel must be lower than the difference between the spring’s unextended length and maximum safe operating length. Material Another important design consideration is material. 301 stainless steel is commonly used for standard-issue...

Constant Torque Spring Motor

시간:2022-9-14

A constant torque spring motor is a strip of prestressed spring material that forms a coil and is stored on a small storage drum. The free end is then pinned and rewound onto the larger output drum; this is the "winding" part of the constant torque spring cycle. When the output drum is released, the spring will return to the storage drum to assume its natural curvature, rotating the output drum and providing an almost constant torque.        Constant torque springs are made of type 301 high quality stainless steel and are supplied in coil form for mounting on the motor drum. Its main features are: 1. Long time deflection under almost constant torque. Positive or limited negative gradients can be achieved. 2. Minimal inter-coil friction and resulting hysteresis, which is common in power springs. 3. Rotary motion is provided directly from the output drum or linear displacement by using cables and spools.        Many applications utilize constant torque spring motors, such as: cord retractors, balance retrieval and return applications, drive motors, cordless curtains, and more. The spring features a high turn design, making it ideal for balancing applications. When they are fully turned, the springs apply a constant torque. You can also guarantee high torque levels. This is due to their compactness and high efficiency.        The function of the constant torque spring motor depends on the design. The size of the spring can vary. Therefore, they make them suitable for use in a variety of applications. We strongly recommend that you consult...

브러시 스프링 프로텍터

Time:2022-9-22

       Conventional motor arrangements include a rotor with windings to conduct current during machine operation. As the rotor rotates, current is conducted through the rotating elements from sources external to the rotor to the rotor windings. A rotating element such as a slip ring or a commutator contacts the brush spring to conduct current.        There are two main types of brush springs, single-coil brushes and double-coil brushes. The brush springs provide constant pressure to the commutator and slip rings while minimizing brush wear, burning and scratching. They provide excellent work at high speeds for improved motor performance. The brush spring is relative to the rotating element, and the brush spring is ground due to friction during use. It is damaged and needs to be replaced periodically. So sometimes the brushes are replaced during motor downtime. To change the brushes safely, the operator uses one hand (to avoid current passing through the operator's body). Brush carriers can be heavy and unwieldy, so brush replacement is not only difficult but dangerous.        A brush holder, brush handle assembly helps operators safely remove replacement brushes in electric machines or other rotating machines. A stationary support is included having at least one groove and a pronged electrical connector. The stationary support has a conductive strip for a portion of the body for being configured to pass through the stationary support. Its lead electrical piece is configured to provide electrical conductance with a collector base (collector base) and electrical fork connectors.        The brush retention structure...

Physical principle behind constant force spring

시간:2022-9-14

When you walk into your office building on your way to work every day, or into your local bank, or any commercial facility, you may open a heavy glass door. When you cross the threshold, the door closes behind you, and you don't think about it. However, the heavy glass door was probably closed by a constant force spring. Constant force springs are widely used in daily applications. From door closers to rope and hose retractors, to sports equipment, toys, motors, etc., constant force springs exert force at an amazing high frequency and consistency. Let's take a closer look at the basic physics behind the constant force spring. In the 17th century, the British physicist Robert Hooke proposed a formula for force and elasticity, which is now called Hooke's law. Hooke's law states that the force (f) required to stretch or compress a spring for a distance (x) varies linearly in proportion to that distance. The formula is f=kx, where k is a constant and represents the stiffness of the spring.   Constant force springs in terms of actual spring performance, Hooke's law is nominal. In the equation, the distance X that the spring moves is a relatively small number. Finally, any elastomer that is stretched or compressed beyond the stress limit of its material composition will show signs of deformation. Therefore, the force properties that depend on the consistent shape and tension state will change in the deformation state. Ideally,constant force springs will exert a consistent force over a given range of motion, repeating without changing. In fact, constant force springs, like all elastomers, are limited...

파워 스프링의 파열에 영향을 미치는 요인

Time:2022-9-15

The power spring is made of stainless steel strip. A spring box is required to limit its outer diameter. The spring center is connected with the shaft. When an external force is applied to make the shaft rotate relative to the spring, the spring will roll on the shaft center and store the torque. When the external force disappears, the spring will produce the torque on the shaft or spring box.     The advantage of power spring is that it can be divided into natural power spring and pre force power spring according to its relaxed shape. In contrast, the preloaded power spring can store 25% to 55% more torque and provide more effective turns. Power springs are mainly used in products such as clockwork toys, timers and automatic rewinding devices (such as power cord, dog puller, pipe winder and automobile safety belt)     It is often seen that the scroll spring purchased will break soon after it is applied to the product. Once the scroll spring breaks, its service life will end. If spring manufacturers choose general materials and immature production technology, the service life of products will be greatly reduced. There are many factors leading to its rupture, mainly including the following factors: wrong scheme design, shortcomings of raw materials, poor production and processing and so on. The quality of power spring determines the quality of products and user experience. Take the dog leasher with scroll spring as an example. With the increasing improvement of living standards, raising pets has become a fashion. In the process...

Exposed Power Cord Solutions

시간:2022-9-14

As people are becoming more and more picky about the beauty of home appliances, the problems of dirt, vulnerability and difficult placement caused by the exposure of power lines have been unsatisfactory. However, with the take-up device, the wires are completely stored in the internal space after use, and these problems are solved. Its core component is the use of winding up. Take-up spring refers to a kind of rotary spring that puts the steel strip crimped once or twice into the fixed box, and then connects it through the middle mandrel to tighten it to the predetermined position. After releasing the preload when necessary, it uses the rebound force of the rolled steel strip to achieve the design purpose.     The utility model has the advantages that the utility model is designed for rotary use, and can be widely used in the circular design device, and forms a coaxial design with the take-up device, which saves space very much. Under the condition of well-designed, its maximum service life can reach 300000 times.     Parameters that must be provided for the design of take-up spring:     1. Inner diameter of installation box (d)     2. Diameter of intermediate mandrel (d)     3. Torque value (T)     4. Application range (NX ~ NY)     5. Service life requirements     6. Torque calculation of products     7. Product life calculation Shenzhen Qianye Precision Metal Co., Ltd. is a leading manufacturer of take-up and spring. It is a manufacturer specializing in providing high-precision spring. It...

Types of Springs in Medical Devices

시간:2022-9-14

Springs are integral components in the manufacture of many medical devices. Whether it’s for a surgical stapler or a medical monitor, the types of springs in medical devices are defined by a specific action or movement required for the application. Though relatively simple in its design, springs store the mechanical energy necessary for a wide range of medical devices, machinery, and equipment to function properly. Any type of surgical instrument, medical equipment or device that has a mechanism undoubtedly has a spring component. Spring material must be medical grade, and the design and function of any device must adhere to stringent regulatory requirements and guidelines as defined by the FDA. Booms, table and bed lifts, fluid control devices, wheelchairs, medical testing and monitoring equipment either fixed or mobile, MRI and X-ray machinery, dental x-ray with articulated arms, medical equipment drawer closing mechanisms, anesthetic infusion devices, sterilization valves, various implants, and shunt valves are all examples of medical devices that require springs to function. Manufacturers of medical devices and devices subsequently relied heavily on springs in a variety of applications. The medical industry relies on the same types of springs that most industries rely on—constant force springs, constant torsion springs, power springs. Constant force spring Constant force springs are coiled with stainless steel tape so that when coiled relative to being stretched, the spring relaxes in a low stress state. When it is unrolled, the restoring force comes mainly from the portion close to the unwinding spring coil. The resultant force is almost constant. The actuators that operate in the surgical...