ບ້ານ > ບລັອກ > ວິທີການເຮັດໃຫ້ພາກຮຽນ spring ແຮງຄົງທີ່ຜະລິດຜົນບັງຄັບໃຊ້ຫຼາຍ

# ວິທີການເຮັດໃຫ້ພາກຮຽນ spring ແຮງຄົງທີ່ຜະລິດຜົນບັງຄັບໃຊ້ຫຼາຍ

ທີ່ມາ:Qianye ຄວາມຊັດເຈນ ເວລາ:2022-9-15
A common way to install a ພາກຮຽນ spring ຜົນບັງຄັບໃຊ້ຄົງທີ່ is to use two or more springs to obtain greater force in a narrow space. This may be necessary if the diameter or width of a single spring exceeds the allocated space, but there is room to add multiple smaller springs. When engaging multiple springs, a much smaller spring design can be used. The total force is the sum of the spring forces.

When combining springs, it is recommended to use the same spring for multiple installation. Compared with using two or more completely different springs to realize the load, this method is more economical and the design will be simpler. Since the force is the sum of the springs, the total force required should be evenly distributed between the number of springs used. We will discuss three different mounting methods for use with multiple springs.

1、 Back to back method

The back-to-back method uses two springs that expand in opposite directions and produce a very stable extension. The distance between the springs should be far enough to allow the spring material to bend naturally so that the component will not bind when retracted.         2、 Series method

When two or more springs are used, it is also a very common practice to install springs in series. Although this method does not have the stability of the back-to-back method, space availability usually determines the use of this design.

3、 Laminar flow method

Laminating springs together is the third option in this series. The term lamination is used to indicate that springs are intertwined, usually welded together at the outer end, inner end, or both. This method is used for relatively short extensions because if the extension is too long, the spring will bind. Use this option when many springs are required to meet the force requirements. As more springs are added, the outside diameter increases, but the overall size is much smaller than other options, including a single spring with the same force.

When the design space is limited, the above three methods can be considered. Qianye ຄວາມແມ່ນຍໍາ is specialized in manufacturing all kinds of spring springs. With more than 20 years of product R &amp; D, production and manufacturing experience, it has become a famous brand dealer in China. Qianye provides effective spring solutions for various product applications.

Tags: , ,

## ຂ່າວ​ລ່າ​ສຸດ

How to make the constant force spring produce more force Product
• ໂທລະສັບ

+86 13827443413
• ອີເມວ

sales@qianyejm.com
• WhatsApp