Huis > Blog > Branche-informatie > Application of constant force spring in self weight balance mechanism of sampling device

Application of constant force spring in self weight balance mechanism of sampling device

source:Qianye Precision time:2022-9-14

At present, various sample probes and reagent probes are used in medical laboratory equipment to suck samples, add samples, suck and test u, add reagents, measure and other operations. Most of the devices used in these action combinations are intelligent sampling devices, and the system used can automatically process data. Due to the full function and complex mechanism of the sampling device, the self weight of the system device is large, This brings higher and higher performance and power requirements to the driving motors of various sampling devices.

The self weight balance mechanism is set between the sampling device and the main structure and is composed of a lifting device and a constant force spring. The lifting device is composed of gears, racks and linear guide rails. The gears are driven by the motor and fixed on the main structure with the motor. The rack and the gear mesh to move up and down. The rack is fixed on the linear guide rail and the sampling device is fixed on the rack, The lifting device can also be composed of gear combination roller chain or synchronous belt, ball screw or flexible rope.

The upper end of the constant force spring is fixed on the main structure, and the lower end of the constant force spring is wound on a roll shaft on the sampling device. The roll shaft can rotate with the rise and fall of the sampling device. According to the height of the rise and fall of the sampling device, the excess part of the constant force spring can always be wound on the roll shaft. No matter how long the constant force spring is stretched, its own force wound on the roll shaft is constant, and the tension of the constant force spring is greater than or equal to the rack The sum of the gravity of the linear guide rail and the sampling device.

  Constante krachtveer is made of steel strip. When it is straightened by external force, the spring will naturally roll back and produce elastic force. The advantages of constant force spring over traditional wire spring are as follows:

  1.High elastic output can be achieved in a very small device space.

 2.Maintain a certain elasticity in all strokes. The preload stroke is short, that is, the required elasticity can be achieved through a short stroke. The original long-term is smaller than the line spring, and the stroke is unlimited.

  When designing or specifying a constant force spring, many basic engineering parameters need to be considered. Material, fatigue life, tensile load, torque and friction, speed and acceleration, installation, safety considerations and application environment are all key factors.

Shenzhen Qianye Precision Metal Co., Ltd. is a global spring manufacturer with more than 20 years of spring manufacturing experience. As a professional spring supplier, we can provide all kinds of spring springs, as well as the application design and solutions of all kinds of springs. We sincerely suggest that customers obtain consulting services from our R&D engineers at the initial stage of product introduction and development. Assist in product design, development and proofing according to your needs, so that your products can find the best solution to meet your application needs.

Tags: ,

Latest News

 Power spring used in automobile safety belt
Power spring used in automobile safety belt

Time:2022-9-14

Safety belt is equal to life belt. Everyone should see the painful accidents caused by not wearing safety belt. I believe everyone is familiar with the car safety belt. It is a safety device to avoid rushing out of the car during collision and causing death and injury. Automobile safety belt is recognized as the cheapest and most effective safety...

 Congratulations on the return of Shenzhou 13 spacecraft
Congratulations on the return of Shenzhou 13 spacecraft

Time:2022-9-14

At about 10 am on the 16th, the "Shenzhou 13" manned spacecraft landed smoothly, and the three astronauts who had been on a business trip for half a year also returned safely, and the hearts of many people also fell to the ground. At the same time, Yang Liwei's voice that appeared in the live broadcast room also made many...

 Add constant force spring in the mechanical arm to make it more stable
Add constant force spring in the mechanical arm to make it more stable

Time:2022-9-14

Adjustable mechanical arms are commonly used in offices, laboratories, studios and other locations to support objects at various angles and heights, such as lights, computer screens, laboratory instruments, microphones, etc.   The adjustable manipulator consists of a base member and two connecting rods connected through a pivot joint, which are held in place by friction in the joint. By using spring...

 Voordelen van Qianye draadloze veercomponenten:
Voordelen van Qianye draadloze veercomponenten:

Time:2022-9-14

All curtain cords, whether installed on the side, caught in curtains, or placed on the back, can be dangerous to children. It is best to replace all corded curtains with cordless curtains in houses where children live or visit, especially in children's bedrooms and play areas. Cordless roller blinds with either a spring system or an electric system can improve...

 Twee aspecten waarmee rekening moet worden gehouden bij het ontwerpen van een veer met constante kracht:
Twee aspecten waarmee rekening moet worden gehouden bij het ontwerpen van een veer met constante kracht:

Time:2022-9-15

The constant force spring is made of stainless steel strip. The high strength steel strip is shaped by specific spring production equipment. When the external force is straightened, the hair strip will naturally roll back and produce elastic force. However, to achieve our goal, we can return to the designated starting point after displacement.     Constant force spring has the characteristics of maintaining...

 Do you have this problem when designing cordless blinds?
Do you have this problem when designing cordless blinds?

Time:2023-3-6

When the curtain is pulled to the top it sags and when it is pulled to the bottom it springs back a certain height.   Qianye Spring Company has succeeded in developing this cordless blinds spring. The steps in the design of a cordless curtain spring are as follows. 1. Determining the size of the winding spring force It is usually necessary...

Product