torsion springs

Huis > torsion springs

Power spring in the design of the car covers: Car covers are commonly used automotive protective articles, but the folding and storage of car covers is a troublesome thing. In order to solve this problem, invention lovers have done a lot of useful exploration and put forward many solutions. One kind of scheme is to use power to drive the reel to directly roll up the car cover cloth. Using the reel to directly roll up the car cover cloth can achieve the purpose of rapid retraction of the car cover, but there are the following problems in actual use: first, the winding and friction of the reel when directly rolling up the car cover cloth wear the car cover cloth greatly; second, in order to adapt to the width of the car cover cloth, the width of the car cover retracting device must be close to the width of the car cover cloth. If it is too narrow, it will increase the winding of the car cover cloth,...

Application of carbon brush spring in wind turbine slip ring brush holder: In order to prevent accidents caused by excessive wear of the carbon brushes on the collector device of the slip ring brush holder of the wind turbine, a normally closed switch-type alarm unit is configured for each carbon brush, and these alarm units are connected in series to the alarm. In the prior art, the grounding brush is held on the structure using a coil spring pressure finger lever structure. In order to ensure sufficient pressure after the carbon brush is worn, the initial pressure of the spring has to be increased, which aggravates the wear of the carbon brush. However, in the later stage of carbon brush wear, the tension of the coil spring becomes insufficient again, resulting in poor contact between the carbon brush and the slip ring, frequent beating, resulting in breakage; at the same time, from the carbon brush to the alarm unit, the intermediate link is complex and easy to Lead to false alarm or no alarm, reducing the...

Application of constant torque spring in wireless radio: With the increasing attention of human beings to environmental issues in the process of social progress, green and low-carbon has become a popular new trend, and energy-saving and environmental protection technologies and products continue to emerge, which are affecting and changing our lives. Hand power generation is a green way of energy supply. The generator powered by the radio contains a constant torque spring motor. When tightening the spring, the spring is gradually wound onto the larger drum, and the mechanical energy obtained during winding is converted into potential energy and stored in the spring. When the spring is released, the stored energy passes through the gear transmission device and the rotating motor to generate output voltage, which is then adjusted by the zener diode to supply power to the radio in the form of a plug. Constant torque spring motor is a prestressed spring material belt, which forms a coil and is stored on a small storage drum. Then fix the...

Application of power spring in speed difference crash arrester: The speed difference anti-fall device can quickly brake and lock falling objects within a limited distance, which is suitable for cargo hoisting and protects the life safety of ground operators and the damage of the lifted workpiece. It is suitable for safety protection to prevent the workpiece from being lifted accidentally when the crane is hoisted. It can effectively protect the life safety of ground operators and the damage of the workpiece to be lifted. It is used in metallurgical automobile manufacturing, petrochemical industry, engineering construction, electricity, ships , communications, pharmaceuticals, bridges and other high-altitude workplaces. So do you know how the speed difference crash arrester works? When there is no solid structure above the operating point for fixing the safety rope, the working platform cannot be set up temporarily, and it is inconvenient to use the safety belt at the same time, the differential fall arrester can be used, which is also a supplement and improvement to...

Custom springs for medical devices: For most of the past two decades, the medical device industry has been booming. Healthcare research has led to the rapid expansion of specific devices used to treat medical needs, from rare to common. These devices range from simple to surprisingly complex, often including automatic sensors, computer monitoring, and even remote monitoring by healthcare providers. When you are designing for a new medical device, it is essential to consider the components you must put together and the system they will create. This means breaking down your design to a level where you can visualize the components that need to go into the project. This means designing each spring assembly individually after evaluating the available options. To help you solve this problem, here are the four most commonly used springs for medical devices and their current common applications. Constant force springs Constant force springs provide a smooth range of motion and a constant load in either extending or retracting direction. This...

Qianye Spring makes your shelf thrusters stand out from the peers: Supermarkets and convenience stores can be seen everywhere in the streets and alleys. More and more people are developing retail sales. Businesses will think of the question "How can we overcome each other and stand out in the competition of peers". If you want to stand out from the peers, innovation is indispensable. Now many large shopping malls will install shelf pushers on the shelves, which is not only convenient for customers but also convenient for tally staff, killing two birds with one stone. According to tests, the installation of automatic rack pushers can increase turnover and save labor. Traditionally, the products on the shelves are usually placed in order. When a customer buys the product, it is difficult for the customer to see the product at the back. And install the automatic propeller, after the customer buys the product, the propeller will automatically advance the product in the back, when the customer wants to find the product, it is...

No matter how small the shower room is, I suggest you install a bath stool: No matter how small the shower room is, it is also recommended that you install a bath stool directly on the wall, which is stable and convenient! I've seen a social news before. It's about a pregnant woman who took a bath at home and slipped and had an accident. To be honest, no one wants this to happen, but because many detailed problems were not paid attention to during the decoration, it led to a series of problems! In fact, when decorating the shower room, we must take safety measures. Not only families with elderly, children and pregnant women, but also ordinary people need a safe environment for bathing. After all, the shower room is a place with large water consumption. It doesn't pay to fall and hurt! The first step of safety measures is to choose anti-skid bricks on the ground. Secondly, for families with elderly, children and pregnant women, it is best to install a bathing stool....

torsion springs Product

Variabele krachtveer: Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.

Constante torsieveer: Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...

Montage- en montagediensten: Qianye Company levert niet alleen de productie van precisieveren, maar richt zich ook op het structurele ontwerp en de functionele oplossingen van het gehele veersysteem en kan een complete set systeemproductie en -assemblage leveren

Optimalisatie ontwerpservice:: From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.

Krachtveer: Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...

Constante krachtveer: Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...

torsion springs News

Application of power spring in aircraft luggage compartment: Luggage compartments in the aircraft cabin are usually located above the heads of seated passengers. To ensure optimum headroom between luggage compartments on the one hand, and to facilitate loading on the other hand, aircraft luggage racks can be lowered from shell luggage compartments or trays in certain applications. When lowered, the front of the luggage compartment opens for loading. A luggage compartment with a lowered housing for an aircraft, wherein the lowered housing is connected to a pulley attached to a support structure of the aircraft by a cable. In order to lower the shell, when the rope lifts the shell on the pulley, the rope is released from the pulley, in which the pulley is biased by the force of the power spring along the rotation direction of the rope wound on the pulley. The power assistance for the pivoting of the luggage cover is realized as a spring device. This solution can achieve low maintenance and wear-free equipment in every case. The natural tendency to expand of the power spring imparts a moment to the arbor or case, resulting in usable torque. The torque produced is cumulative, so the torque increases as the spring is tightened and decreases as the spring is loosened. Power springs that can be assembled into the customer's housing for immediate assembly, or a retaining ring is provided for transferring the spring into the customer's housing. Power spring torque and total turns are the most important output requirements in power spring design. The performance of a power spring depends on the size of the spring material (thickness, width and length) and available space (housing and mandrel...

Fall Arrester using Qianye power spring: The fall arrester is also called the speed difference device, which is a protective product. It is suitable for safety protection when the crane is hoisted to prevent the suspended workpiece from accidentally falling. It can effectively protect the life safety of ground operators and the damage of the suspended workpiece. It is used in metallurgical automobile manufacturing, petrochemical industry, engineering construction, electric power, and ships. , Communications, pharmacy, bridges and other high-level workplaces. The protective effect of the protective device product must pass. The power spring has a retractable function and is an ideal part of the gravity dissipator used in the dropper. The anti-fall system is connected between the fixed points of the cable harness, and they can stop the user from falling in the first time. Even when the power spring is fully deployed, the gravity dissipator of the dropper can prevent the user from being hit in the event of a fall. The advantages of Qianye power springs are divided into natural power springs and pre-force power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. When using Qianye power spring as its parts in normal use, the safety rope will expand and contract freely with the human body. Under the action of the mechanism in the device, it is in a semi-tensed state, so that the operator has no sense of worry. In the event of a fall, the pulling speed of the safety rope will be significantly increased,...

Common Applications of Double Torsion Springs in Medical Devices: Double torsion springs are widely used in medical devices due to their unique mechanical properties and reliable performance. Some common applications of double torsion springs in medical devices include: Surgical Instruments: Double torsion springs are often used in surgical instruments such as scissors, clamps, and forceps. These springs help to provide tension and control the movement of the instrument. Medical Implants: Double torsion springs are used in medical implants such as bone plates, screws, and pins. These springs help to maintain the proper positioning of the implant and prevent it from moving or shifting. Drug Delivery Devices: Double torsion springs are used in drug delivery devices such as autoinjectors and insulin pumps. These springs help to provide the force needed to deliver the medication. Patient Monitoring Devices: Double torsion springs are used in patient monitoring devices such as blood pressure monitors and electrocardiogram (ECG) machines. These springs help to provide the necessary tension to ensure accurate readings. Diagnostic Equipment: Double torsion springs are used in diagnostic equipment such as ultrasound machines and X-ray machines. These springs help to ensure that the equipment is properly positioned and stable during use. Prosthetics: Double torsion springs are used in prosthetics such as artificial limbs and joints. These springs help to provide the necessary tension and flexibility needed for natural movement. Overall, double torsion springs play a critical role in the performance and reliability of many medical devices. Their unique mechanical properties, including their ability to store and release energy, make them an essential component in the design of these devices.

Build dreams together, healthy counterparts-Qianye precision: Qianye team is convinced that the first priority of corporate governance is Qianye loves every employee.The health of employees is the company's greatest wealth, to ensure the health of employees, create a good working and living environment, and reflect the company's care for employees. On November 15, 2021, Shenzhen Qianye Precision Metal Co., Ltd. officially kicked off the annual free physical examination for its employees. In order to ensure that the physical examination activity is really implemented and for the welfare and health of employees, the company made a detailed and comprehensive survey of all physical examination centers before the activity and selected the final physical examination unit. Considering the actual demand of the production line, the company also actively strives to bring the physical examination place directly to the company from the hospital, which greatly saves the employees' time. Regular medical examinations are very important for everyone. The physical examination is not only responsible for oneself, but also for family, enterprise and society. Qianye Precision organizes regular physical examination activities for employees every year, so that everyone can fully understand their physical condition and do a good job in disease prevention or treatment. In the future, the company will continue to arrange regular physical examination for employees, care for employees and pay attention to their health. We hope that all the family members of Shenzhen Qianye Precision Metal Technology Co., Ltd. not only build their dreams together, but also work together in a healthy way.

Application of power spring in automatic shoelace system: Once upon a time, did you have a dream that one day you could not tie your shoes by yourself? A kind of shoes with automatic shoelace has been realized now! The biggest highlight of automatic shoes is that users do not need to bend down to tie shoes. Through the built-in sensor in the shoes, it can even automatically adjust the tightness according to the movement in real time. The automatic shoelace system adopts a power spring shoelace engine. The power spring shoelace engine 400 can include a housing 405 (including a base 406 and a cover 408), a motor 410, a shaft 415, a spring mandrel 420, a power spring 430, a clutch 435, a lever 440, a coupling (spool mandrel) 445, a coupling bearing 450, a spool 460, a driven gear 465, a drive gear 470, a spring mandrel bearing 475, and a driven gear bearing 480. The power spring lacing engine can be driven by a motor to rotate the power spring to store energy in the power spring. During a shoelace event, the power spring can selectively and controllably release the stored energy to the coupling to rotate the spool, and between shoelace events, the power spring can rotate to store energy. The power spring system can use a small number of small parts to provide a compact, quiet and cost-effective shoelace engine. The power spring is divided into natural power spring and pre force power spring according to its relaxed shape. In contrast, pre tensioned power springs can store 25% to 55% more torque and provide more effective turns. The power spring can be assembled into the customer's housing for immediate assembly,...

[Qianye precision]Physical design and recoil force of constant force spring: In most types of springs, when the spring is compressed and then relaxed, the force applied is proportional to the distance the spring is stretched. Unlike ordinary springs, constant force springs do not comply with this rule. Due to the physical design of constant force spring, its return force remains constant. Therefore, constant force springs are useful in many applications that require consistent recoil. The behavior of ordinary springs can be described by a mathematical equation called Hooke's law. The law points out that the force of the recoil spring in the recoil direction is equal to the distance between the spring displacement and the equilibrium point. In other words, it is how much the spring is elongated and multiplied by the mathematical constant, that is, the spring stiffness. The spring recoils in the direction opposite to the stretching direction. Because many elastic materials work in this way, Hooke's law has a wide range of applications in the field of physics. Hooke's law does not apply to constant force springs because their recoil force remains constant over the entire range of motion. This is achieved through its unique physical design, which consists of thin and curly steel strip. The constant force spring is in a relaxed state when it is fully rolled up, and is loaded when it is partially or fully unfolded. After release, the spring rebounds by pulling the extended carbon belt back into the tight coil. Since the recoil force mainly comes from the part closest to the coiling roll, a constant force can be maintained. Common applications of constant force...

Traditional power springs and preloaded springs: Traditional power springs and preloaded power springs are fabricated from spring steel bars to provide torque. Spring steel is a low alloy, medium carbon steel or high carbon steel with a very high yield strength. Objects made of spring steel can return to their original shape despite significant bending or twisting. Power springs use flat (unstressed) steel windings, while pre-stressed power springs use pre-stressed steel to produce a larger range of usable torque than conventional power springs. During the manufacturing process, the spring is wound into the retaining ring or the customer's housing (the retaining ring is pictured below). When ready for final installation, carefully install the spring into its housing with the outer end attached to the outer edge and the inner end attached to the mandrel (see photo below). During operation, the housing or mandrel will be fixed while the other component is free to rotate. Depending on the requirements of your specific design, it may be beneficial to use a fixed mandrel/free box or free box/fixed mandrel arrangement. These springs are typically used to retract the cord or cable of the spool. You might see it in lawn mowers, retractable lanyards, or dog leashes. This is also the type of spring used to drive many mechanical clocks and timers, which is why they are sometimes called "clock springs". The load provided by the spring increases with the cross-sectional area of the material. The number of turns the spring can provide depends on the space available between the mandrel and the...

Toepassing van veer met constante kracht in medische apparatuur: A support device for assisting a patient is used to assist the movement of a patient at the patient support device. In the prior art, a caregiver would operate a patient lift or motor by guiding the lift to raise or lower the patient at the patient support. Such manipulations often require the precise manipulation of heavy forceps and motors by a paramedic to help the patient move around the patient support. The support means may incorporate a constant force spring design, the support structure comprising a base and an upper portion extending upwardly from the base. The constant force spring assembly may include a carrier slidably coupled to the base secured to a first end of the carrier. The base may include channels that guide sliding movement of the carrier relative to the base of the support structure. The constant force spring assembly may also include a spool and a motor configured to drive the spool. The auxiliary belt may be secured to the spool so that the auxiliary belt is wound and unwound from the spool in response to a motor driving the spool. And the motor can be fixed to the carrier to move with the carrier. Constant force springs get their name because their motion force is constantly applied. The load is determined by the width and thickness of the material and the diameter of the coil. The tightly wound rollers work in a linear motion, not obeying Hooke's law (F=kX), but constantly generating forces as they deflect.These springs provide...

Telefoon

+86 13827443413
E-mail

sales@qianyejm.com
bieden
WhatsApp