Дом > Блог > Информация об отрасли > Custom springs for medical devices

Custom springs for medical devices

источник:Цянь Точность время:2022-9-14
For most of the past two decades, the medical device industry has been booming. Healthcare research has led to the rapid expansion of specific devices used to treat medical needs, from rare to common. These devices range from simple to surprisingly complex, often including automatic sensors, computer monitoring, and even remote monitoring by healthcare providers.

When you are designing for a new medical device, it is essential to consider the components you must put together and the system they will create. This means breaking down your design to a level where you can visualize the components that need to go into the project. This means designing each spring assembly individually after evaluating the available options.

To help you solve this problem, here are the four most commonly used springs for medical devices and their current common applications.

   Constant force springs
Constant force springs provide a smooth range of motion and a constant load in either extending or retracting direction. This spring design has no inertia to overcome when considering the initial position forces. Constant force springs are compact and mount easily to existing hardware. These types of springs can eliminate the need for costly and complicated motors, thus decreasing device size and cost.
  Spiral torsion springs
Spiral torsion springs are normally used in applications requiring less than 360 degrees of rotation. They are generally used to obtain a large amount of torque through a small amount of rotation. Spiral torsion springs allow for rotation in two directions and a “return to center” capability, like a dental X-ray head unit.
  Spring reels
Spring powered reels (arbor and base mounted) are available with a wide range of forces, cable lengths, and travel. Spring powered reels mount easily, come with pre-installed cables, and attach quickly.
  Custom mechanical assemblies
Spring sub-assemblies may call for the use of components consisting of a variety of materials (molded plastic, machined metal, rubber). We frequently are able to not only produce the specialty spring, but we can also assemble the spring and various customer designated or customer supplied additional parts into a completed sub-assembly.

 

  Our components are frequently used in the following medical applications and devices:
  • Table and bed lift mechanisms
  • Computer monitors in fixed and mobile applications
  • MRI and X-ray devices
  • Dental X-Ray equipment with articulated arms
  • Medical equipment drawer closing mechanisms
  • Surgical staplers
  Engineers from Shenzhen Qianye Precision Metal Co., Ltd. can help improve your medical equipment, and look forward to discussing your spring requirements, including any equipment balance challenges. Our quality assurance team tests at every stage of manufacturing to ensure that customer requirements are met. We provide excellent customer service throughout the manufacturing process. We are not just spring manufacturers; We are your partner.
Теги:

Последние новости

 Automatic rolling shutter
Automatic rolling shutter

Время:2022-9-14

   It has to be said that laziness is a major driving force to promote scientific and technological progress. The emergence of a series of smart appliances not only makes people's life intelligent and convenient, but also gives everyone more opportunities to "be lazy" to complete other work or things. The charm of smart appliances lies in the linkage control...

 Fall Arrester using Qianye power spring
Fall Arrester using Qianye power spring

Время:2022-9-14

The fall arrester is also called the speed difference device, which is a protective product. It is suitable for safety protection when the crane is hoisted to prevent the suspended workpiece from accidentally falling. It can effectively protect the life safety of ground operators and the damage of the suspended workpiece. It is used in metallurgical automobile manufacturing, petrochemical industry,...

 Design of constant force springs
Design of constant force springs

Время:2022-9-14

 A constant force spring is a spring that exerts a constant force over its range of motion. That is, it does not obey Hooke's law. Typically, a constant force spring is constructed as a coiled band of spring steel so that the spring relaxes when fully coiled. When it is unrolled, the restoring force comes mainly from the portion of...

 The spring in the timer
The spring in the timer

Время:2022-9-14

Timer is a precise timing device, which uses mechanical clock to drive the switch. Its time positioning is very accurate, and it can achieve such effect. Spring plays a great role in it. The emergence of timers has brought great changes to our lives. At first, we used the hourglass to determine the time. In modern life, timers have been...

 Применение силовой пружины в колесе здоровья брюшной полости
Применение силовой пружины в колесе здоровья брюшной полости

Время:2022-9-14

Колесо здоровья живота представляет собой небольшой толкатель, который может тренировать мышцы, суставы и снижать вес. Материал, как правило, представляет собой высококачественный инженерный пластик с простым дизайном, красивым внешним видом, прочностью и долговечностью, а также простой в использовании. Он используется для тренировки жира в области живота, талии, бедер, рук и других частей тела. Из-за простого сайта, необходимого для упражнений,...

 Do you know how powerful a rowing machine with a power spring is?
Do you know how powerful a rowing machine with a power spring is?

Время:2022-9-14

Now many TV dramas will appear the figure of rowing machine, so do you know what rowing machine is? In fact, rowing machine is a low load aerobic exercise, which is now welcomed by more and more people because of its high exercise efficiency. It can not only do aerobic training, but also strengthen strength. Among large-scale fitness equipment, it...

Custom springs for medical devices Product
 Силовая пружина
Силовая пружина
Характеристика: Силовая пружина намотана стальной полосой. Пружинная коробка необходима для ограничения ее внешнего диаметра. Центр пружины соединен с валом. Когда...
 Пружина постоянной силы
Пружина постоянной силы
Характеристика: Пружины постоянной силы (постоянной силы) прокатаны полосами из нержавеющей стали. Полосы из высокопрочной стали формируются на специальном производственном пружинном оборудовании. Когда внешняя сила выпрямляет их,...
 Пружина переменной силы
Пружина переменной силы
Характеристика: Внешний вид пружины переменной силы и пружины переменного кручения очень похож на пружину постоянной силы и пружину постоянного кручения. Пружины переменного усилия и регулируемые торсионные пружины могут...
 Услуга оптимизации дизайна
Услуга оптимизации дизайна
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up...
 Пружина угольной щетки
Пружина угольной щетки
Характеристика: 1. Благодаря постоянному усилию, независимо от длины угольной щетки и коллектора, давление остается одинаковым. 2. Пружина постоянной силы уменьшает угольную щетку...
 Пружина постоянного кручения
Пружина постоянного кручения
Характеристика: Пружина фиксированного (постоянного) крутящего момента (пружина) изготовлена из нержавеющей стали. Внешняя сила перематывает боевую пружину из ее естественного состояния в выходное колесо (накопление энергии). Когда...