Дом > Блог > Общая проблема > Electric Fan Lifts Off with Spring-Powered Boost

Electric Fan Lifts Off with Spring-Powered Boost

источник:Цянь Точность время:2023-4-28

A team of researchers from Empa, the Swiss Federal Laboratories for Materials Science and Technology, have designed a new type of electric fan that can lift off the ground and hover, thanks to a spring-powered boost.

The device, known as the FanFlyer, works by using a pair of curved blades that spin in opposite directions, much like a helicopter. However, instead of relying on a heavy motor and battery system, the FanFlyer uses a lightweight electric motor that drives a wound spring. When the spring is released, it drives the blades and lifts the device off the ground.

The FanFlyer is a very simple and lightweight device, but it has the potential to revolutionize the way we think about electric flight,” said Dr. Markus Rapp, who led the research team. “Because it doesn’t require a heavy battery or motor, it could be used for a wide range of applications, from aerial photography to remote sensing.”

One of the key advantages of the FanFlyer is its simplicity. Unlike conventional drones or helicopters, it has no complex control systems or stabilizers. Instead, it relies on the natural stability of the spinning blades to keep it aloft. As a result, it is much easier to operate and requires less training and expertise.

Another advantage is its efficiency. Because it uses a wound spring to power the blades, it is much lighter and more energy-efficient than conventional electric motors. This means it can fly for longer periods of time, and cover greater distances, on a single charge.

 

 

To demonstrate the potential of the FanFlyer, the research team conducted a series of flight tests, both indoors and outdoors. They found that the device was able to lift off and hover with ease, and was able to fly in a straight line and change direction smoothly.

The team also explored the possibility of using the FanFlyer for environmental monitoring, such as measuring air pollution levels or monitoring wildlife populations. Because it is so lightweight and quiet, it could be used to fly over sensitive areas without disturbing wildlife or causing any damage.

Overall, the FanFlyer is a promising new development in the field of electric flight. Its simplicity, efficiency, and versatility make it an attractive option for a wide range of applications and could help to pave the way for a new generation of lightweight, low-cost aerial vehicles.

Последние новости

 Spiral Torsion Spring: A Comprehensive Guide to Design and Applications
Spiral Torsion Spring: A Comprehensive Guide to Design and Applications

Time:2023-6-8

Spiral torsion springs are a type of spring that is commonly used in various applications such as automotive, aerospace, medical, and industrial machinery. These springs are designed to store and release energy when they are twisted around their axis. In this guide, we will provide a comprehensive overview of spiral torsion springs, including their design, materials, and applications. Design of...

 Spring-Loaded Electric Fan Lifter
Spring-Loaded Electric Fan Lifter

Time:2023-4-23

The Spring-Loaded Electric Fan Lifter is a device that is designed to be used in industrial settings. It is used to lift and move heavy electric fans, which are commonly used in manufacturing plants, warehouses, and other types of industrial facilities. The device uses a spring-loaded mechanism that allows it to lift heavy loads with ease, making it an essential...

 Variable Force Spring: An Introduction to Its Function and Applications
Variable Force Spring: An Introduction to Its Function and Applications

Time:2023-5-7

Introduction: A variable force spring is a type of spring that provides a variable amount of force as it is extended or compressed. This type of spring is used in a variety of applications where a constant force is required over a range of motion. In this article, we will discuss the function and applications of a variable force spring...

 High Precision Springs: Achieving Accuracy and Consistency in Spring Manufacturing
High Precision Springs: Achieving Accuracy and Consistency in Spring Manufacturing

Time:2023-6-28

Springs are essential components in various applications, from automotive and industrial machinery to medical devices and consumer electronics. They serve as energy storage devices and provide critical functions such as shock absorption, force generation, and motion control. However, springs must be designed and manufactured to meet specific requirements, including size, shape, material, and performance parameters. In many cases, high precision...

 Installation of Constant Force Spring: A Guide for Proper Mounting
Installation of Constant Force Spring: A Guide for Proper Mounting

Time:2023-10-31

Introduction: Constant force springs are mechanical devices that provide a constant force throughout their entire range of motion. They are widely used in various applications, such as automotive, aerospace, medical, and industrial equipment. Proper installation of constant force springs is essential to ensure their optimal performance and longevity. In this guide, we will provide step-by-step instructions on how to mount...

 Types of Springs and Their Applications
Types of Springs and Their Applications

Time:2023-8-28

Springs are mechanical devices that store and release energy. They are widely used in various industries and applications due to their ability to absorb shocks, maintain force or pressure, and control motion. There are several types of springs, each with its unique characteristics and applications. In this article, we will explore the different types of springs and their uses. 1....

Product
 Услуга оптимизации дизайна
Услуга оптимизации дизайна
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up...
 Пружина постоянной силы
Пружина постоянной силы
Характеристика: Пружины постоянной силы (постоянной силы) прокатаны полосами из нержавеющей стали. Полосы из высокопрочной стали формируются на специальном производственном пружинном оборудовании. Когда внешняя сила выпрямляет их,...
 Силовая пружина
Силовая пружина
Характеристика: Силовая пружина намотана стальной полосой. Пружинная коробка необходима для ограничения ее внешнего диаметра. Центр пружины соединен с валом. Когда...
 Пружина постоянного кручения
Пружина постоянного кручения
Характеристика: Пружина фиксированного (постоянного) крутящего момента (пружина) изготовлена из нержавеющей стали. Внешняя сила перематывает боевую пружину из ее естественного состояния в выходное колесо (накопление энергии). Когда...
 Услуги по сборке и монтажу
Услуги по сборке и монтажу
Компания Qianye не только обеспечивает производство прецизионных пружин, но также уделяет особое внимание конструктивным и функциональным решениям всей пружинной системы и может предоставить полный...
 Пружина угольной щетки
Пружина угольной щетки
Характеристика: 1. Благодаря постоянному усилию, независимо от длины угольной щетки и коллектора, давление остается одинаковым. 2. Пружина постоянной силы уменьшает угольную щетку...