Дом > Computer Monitors Springs
Применение пружины постоянной силы в двери холодильника
Применение пружины постоянной силы в двери холодильника
In order to make the refrigerator operate effectively, the door should be kept closed. Keep the door open for a short time when putting or taking out food. However, opening it for a long time will affect its cooling and endanger food safety. It will also lead to excess power consumption. Fortunately, the modern refrigerator door can be added with a constant force spring to automatically close after you open the refrigerator for use. Nowadays, this kind of design is relatively rare in the market. It is generally a magnetic refrigerator door, which explains why the magnet is attached to it.   We have seen that it is essential to keep the refrigerator door closed all the time. If the door remains open for a long time, it will counteract the internal temperature balance and affect the quality of the food stored in it.When this situation continues for a long time, the compressor cannot maintain a low internal temperature. This undermines...
Application of power spring in draw-wire encoder
Application of power spring in draw-wire encoder
A draw-wire encoder, also known as a string potentiometer, pull wire position sensor, cable extension displacement sensor, or yo-yo potentiometer. It is a cable driven position or displacement sensor for linear position measurement and velocity using a flexible cable (wire) and a spring loaded spool.   The string pot or cable extension sensor is composed of four main components in the shell: 1. High strength stainless steel cable (rope or steel wire rope); 2. Equal diameter spool (drum); 3. Power spring with high torque and long service life; 4. Rotary potential precision sensor.   In the shell of the sensor, a soft high-strength stainless steel cable is tightly wound on a precision machined cylindrical drum (or spool) with constant diameter, which rotates with the winding and unfolding of the measuring cable. In order to maintain the tension and retraction of the steel wire, the spring is connected to the drum. Then connect the spool to the shaft of the rotary potential precision sensor (or encoder). When the...
Application of power spring in electric vehicle charging station
Application of power spring in electric vehicle charging station
As the times change, gas stations are gradually replaced by electric vehicle charging stations. We have always been a natural partner for designers and manufacturers of electric vehicle charging stations, because they need to be compact, clean and provide trouble free cable management solutions for their electric vehicle charging stations around the world.   By applying our power spring to the retractable cable drum, the cable wear is reduced, the tangled cable is eliminated, and the cable can be neatly stored when not in use. In this way, we help EV charging station developers shape the future of safe and trouble free charging of electric vehicles. The natural expansion trend of the power spring gives a torque to the spindle or case, resulting in a usable torque. The generated torque is cumulative, so the torque will increase as the spring is tightened and decrease as the spring is loosened. Torque and total number of turns are the most important output requirements in the design of power...
Power springs used in recoil start systems
Power springs used in recoil start systems
 Small engines are well known and are commonly used in lawn mowers and garden tractors and various other garden and lawn maintenance tools, in addition to other environments. Typically, each of these engines is equipped with a recoil starting system that includes a rope that rotates the starting mechanism to engage a flywheel that is connected to the engine for starting purposes. Once the rope starter is pulled, the recoil mechanism is always provided with the engine to reel the starter rope back to the starting mechanism.   The recoil portion of the starter mechanism is operated by a power spring that tensions when the operator pulls on the starter rope. Once the rope is fully pulled, the operator releases it. Most power springs on the market often fail, so the recoil rewinding mechanism needs to be disassembled and the spring replaced. And replacing the spring is a tedious task because the operator needs to keep the spring in the cavity inside...
Variable Force Springs In New Point Of Purchase Display
Variable Force Springs In New Point Of Purchase Display
Automatic advance shelves are more widely used in stores and people's lives, and are more often used for displaying and placing goods (incense hata, rosemary, etc.). However, the conventional shelf propeller has one end of the baffle on both sides fixed and the other end movable. Although in use, after the first row of goods is taken away, the second row of goods will be automatically pushed to the first row, which can save the staff's finishing time, but in the process of pushing the goods, it is easy to cause the goods in the back row to pop out of the display slot due to the activity of the ends of the shelf advancer on both sides of the stopper, which brings inconvenience to the use.   To provide a new type of shelf propeller for the problem of the shortcomings of the existing technology. The new shelf propeller includes a base plate, a side plate, a push plate...
Qianye Precision Cordless Blind Spring
Qianye Precision Cordless Blind Spring
 Imagine, on the weekend of a busy work week, unloading from work, taking a hot bath, having a leisurely dinner, and when it's time to rest, draw the curtains to isolate the noisy world outside, and then, beautiful and beautiful Sleeping until you wake up naturally, this is not the most important thing for every office worker.   However, for families with children, curtains have increasingly become a new safety hazard, especially for families with roller shutters. The pull rope of the roller blind is usually closed at the bottom or the side. If it is not fixed, the rope will slide down to form a loop, which is easy to wrap around the neck of the child, causing the child to suffocate, and even lead to death in severe cases. It is reported that there are many cases of suffocation and death of children due to rope entanglement accidents every year, mostly children under the age of 4. The...
A constant torque spring can play such a big role in the take-up device
A constant torque spring can play such a big role in the take-up device
Constant torque springs can help take up the wire and are used in many products. All electrical products have a cord set that is connected to the power supply, but this power cord will bring some trouble to our arrangement. The function of the constant torque spring is this, it can bring a free shrinkage process to the electrical cord set , making it easy to take up the line, very practical. When the external force reverses the constant torque spring from the natural state to the output wheel, once the external force is removed, the constant torque spring will be rolled back to the natural state, and a constant torque will be generated in the output wheel at the same time. Constant torque spring can be used in automatic winding, balance weight and power source, such as automatic winding device of power line. Advantages of constant torque spring over power spring: 1. The torque will not change as the number of turns increases. 2. There is no limit on the number of...
Computer Monitors Springs Product
 Силовая пружина
Силовая пружина
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
 Услуга оптимизации дизайна
Услуга оптимизации дизайна
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.
 Услуги по сборке и монтажу
Услуги по сборке и монтажу
Компания Qianye не только обеспечивает производство прецизионных пружин, но также фокусируется на конструктивном исполнении и функциональных решениях всей пружинной системы и может обеспечить полный комплекс производства и сборки системы.
 Пружина постоянного кручения
Пружина постоянного кручения
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
 Пружина постоянной силы
Пружина постоянной силы
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Пружина угольной щетки
Пружина угольной щетки
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
Computer Monitors Springs News
 The power source of clockwork toy — constant torque spring
The power source of clockwork toy — constant torque spring

Время:2022-9-14

Clockwork toys are not new to children, and children are also very interested in clockwork toys, because clockwork toys will walk around, or go straight or circle, which is very funny. This kind of toy design has lasted for decades. There are many kinds of clockwork toys, mainly cars and animals. They are suitable for children aged 3 to 12. Clockwork toy is the general name of motor toys with clockwork as power device. Spring is a kind of spring machine. In the spring, there is a recyclable coil spring. The principle is similar to that of a gyroscope. When the spring rotates, the coil spring inside is wrapped tightly. In short, it is to accumulate power potential energy, and then the spring returns, which naturally produces power potential energy. The clockwork toy uses a constant torque spring, which is made of stainless steel. The external force reverses the spring from the natural shape to the output wheel (energy storage). When the external force is removed, the spring will return to the natural state and generate constant torque on the output wheel, so it is called constant torque spring. Compared with the power spring, the constant torque spring has the advantage that the torque will not change due to the increase of the number of turns, and there is no limit on the number of turns available. The constant torque spring is mostly used in the design of multiple turns. The number of invalid turns is less, more energy can be stored and the efficiency is higher. When the spring is...
 How to solve the problem of fan lifting function by dint spring
How to solve the problem of fan lifting function by dint spring

Время: 2022-9-13

We all know that gravity of the earth's center will drop rapidly to the bottom point when the object has no support, and it will be heavy when it rises. Similarly, when the fan moves up and down, it will also be affected by gravity. Therefore, we all hope that the fan will be more light when it is lifted and lowered; it can be easily moved up and down by hand to locate at will, and the fan will be more arbitrary when using it. Therefore, to achieve the purpose of light and arbitrary positioning, we must solve the problem of gravity There are several main points for the fan to rise and fall: 1. Life problems: Each kind of hair will have a certain life cycle. If you choose the general materials and immature production technology, the life of the products will be greatly reduced. The same with the elastic problem of hairpin, they are all related to materials and processing technology. In the process of using the fixed force, there will be problems of too short life,. 2. Elasticity: In the limited space, under the same size conditions, in order to make the hair to meet the strength requirements, we must strengthen it from two aspects to better play the effect. (1) Reasonable use of materials: In the process of production and design, we need to use the corresponding materials for processing and production according to the design of the spring. (2) Processing technology There are different processes for the same surface size of the fixed force...
 Motor brush spring and wind turbine maintenance
Motor brush spring and wind turbine maintenance

Время:2022-9-14

Research shows that to get the greatest return from turbines, whether onshore or offshore, the bigger the turbine, the better. Wind turbines have proven to produce reliable and pollution-free energy, and as technology innovates, the cost of developing and manufacturing them will only become more affordable.  Motor Brush Materials and Wind Turbine Maintenance     Motor brushes are consumables, which means there is significant wear and tear over time and will need to be replaced. While proper wind turbine operation and maintenance requires moderate wear, excessive wear can create carbon dust in the slip ring cabinet, reducing internal isolation.      Also, a useful tip to keep in mind is that motor brushes that are evenly worn indicate good performance. Since reliability is critical in wind applications that generate electricity for industrial tasks and homes, businesses and schools, it is important to work closely with your engineers and parts manufacturers to determine the best motor brush materials. Two common options include: Copper carbon brushes are very common and affordable. They can be used for up to two years, but due to the high amount of carbon dust, they need a lot of maintenance. On the other hand, silver motor brushes are more expensive, but cleaner, can withstand harsh weather, and can be used for up to five years. Slip ring compatibility and design is another component to consider. Although there is wear, your motor brush must maintain a stable surface finish to avoid overtime affecting the performance of the brush. Due to the high cost of repair or replacement of wind...
 Два аспекта, которые следует учитывать при разработке пружины постоянной силы
Два аспекта, которые следует учитывать при разработке пружины постоянной силы

Time:2022-9-15

The constant force spring is made of stainless steel strip. The high strength steel strip is shaped by specific spring production equipment. When the external force is straightened, the hair strip will naturally roll back and produce elastic force. However, to achieve our goal, we can return to the designated starting point after displacement.     Constant force spring has the characteristics of maintaining constant force in a long stroke. Its function can be applied to the adjustment of lifting doors and windows, computer monitors and fans, shopping mall display shelves or motor carbon brush motors and other products that require linear motion such as round trip, sliding, stretching, homing, balance or force saving. So how to design the constant force spring in line with product performance ? We generally need to consider from two aspects :     1. Performance of constant force spring    The two most important properties of the constant force rod are elastic value and life. The thicker the elastic               material, the wider the width, the higher the elastic force. Among the materials with the same size, the smaller the     crimp diameter is, the higher the elasticity is, and vice versa. On the contrary, under the same manufacturing             conditions, the thinner the material is, the better the life is. In the same size of the material, the smaller the coil diameter is, the shorter the life is, and vice versa.     2. Installation space of constant force spring    Generally, the outer diameter of the spring...
 Small spring has great effect
Small spring has great effect

Time:2022-9-15

The reason why the world we live in is so orderly is that there are precise links between large and small objects. So many things in life are crucial. Whether they are large or small, they are indispensable to our life, but some small parts in life are unknown, but there are tens of thousands of them. The spring I know is also one of them. It always exists in a position that people can't see and does their own thing silently. Moreover, he exists everywhere in life, even if we don't know it. Today, I will explain the functions of these small springs. Spring is a kind of mechanical part that uses elasticity to work. Generally made of spring steel. Although the spring is small, as a general basic part, it has large quantity, wide range and complex varieties. It is used to control the movement of mechanical parts, mitigate impact or vibration, store energy, measure the size of force, etc. it is widely used in machines and instruments. The application field involves almost all fields of the national economy. Spring plays a big or small role in all articles in our life. It also has different shapes and structures because of different force values. However, according to the force value, people still divide it into three categories: constant force spring, power spring and variable force spring. Its working principle is to use one of its characteristics. It deforms it by applying force and will also try to return to its original state. Let me show you how springs...
 Do you really understand the variable force spring?
Do you really understand the variable force spring?

Time:2022-9-15

The variable force springs can break through the traditional spring affected by Hooke ' s law, so that the stroke and force are no longer proportional to increase, but can achieve a variety of elastic displacement combinations such as negative slope stepped fixed force. According to the needs of mechanical engineering, the relationship between elastic force and displacement stroke can be used to design various elastic curve changes in specific occasions, which is the output force value can be arbitrarily desired.     The variable force springs can be customized for various elastic curve changes according to specific occasions, such as department store shelves propulsion device, pen-type drug syringe ( insulin ) and cordless curtain.      What are the reasons for using variable force springs in these applications ? What are they trying to achieve ?     In the point of purchase display, variable force springs are commonly used in trays that push product forward in a controlled manner. Variable force spring corporated into pusher trays aid in front-facing the product, allowing shelves to look stocked at all times. These trays allow for a more organized store inventory, as well as assist in keeping track of inventory needs. Variable Force springs are designed around the weight of the products they are pushing. This means that they are always designed in a way where the product never gets slammed or compromised while being selected. These springs allow for most any product to be pushed consistently, regardless of the weight.  Allow for the product to be shopped hassle–free by the customer. Products include cosmetics, health/medicines, beverage, food and much...
 Application of power spring in draw-wire encoder
Application of power spring in draw-wire encoder

Время:2022-9-14

A draw-wire encoder, also known as a string potentiometer, pull wire position sensor, cable extension displacement sensor, or yo-yo potentiometer. It is a cable driven position or displacement sensor for linear position measurement and velocity using a flexible cable (wire) and a spring loaded spool.   The string pot or cable extension sensor is composed of four main components in the shell: 1. High strength stainless steel cable (rope or steel wire rope); 2. Equal diameter spool (drum); 3. Power spring with high torque and long service life; 4. Rotary potential precision sensor.   In the shell of the sensor, a soft high-strength stainless steel cable is tightly wound on a precision machined cylindrical drum (or spool) with constant diameter, which rotates with the winding and unfolding of the measuring cable. In order to maintain the tension and retraction of the steel wire, the spring is connected to the drum. Then connect the spool to the shaft of the rotary potential precision sensor (or encoder). When the sensor string extends linearly with the moving object, it will cause the roller and sensor shaft to rotate.   For displacement or position measurement, the main body of the sensor is installed on the fixed surface, and the end of the flexible cable is connected to the moving object. When the object changes its position, the cable unfolds and reels and the rotating spool drive the shaft of the sensing device, generating an electrical signal proportional to the linear extension or displacement of the cable. For speed measurement, a tachometer is required. The power spring is mainly used in the equipment of...
 Why is the support important for people to face the display for a long time?
Why is the support important for people to face the display for a long time?

Время:2022-9-14

What do you think of the correct sitting posture in office? Relax your shoulders, keep your eyes in front, and keep your eyes balanced at the top of the computer or the top 3 / 1 of the monitor. This is the correct sitting posture of our office. To stand our neck, we need a certain height of the display. The horizontal position of the display is low, and the neck is easy to tilt forward. The cervical spine will obviously feel uncomfortable, very tired, and will cause pressure on the muscles of the neck.      The display bracket is mainly composed of upper support arm, lower support arm, display connector and desktop clamp. The most important core lifting components are in the upper support arm, which supports the display through the deformation of spring or air rod structure in the upper arm. When it comes to the spring in the core lifting part, the reason why the display can rise and fall is that it is designed into a lifter that can adjust the height of the display at will by using the principle of free rise and fall of constant force spring. With the help of the tension of the spring, its height can be adjusted freely. Compared with the column support (the lifting up and down is cumbersome, and the screws need to be adjusted by tools every time) it is simpler to use and more convenient to operate after adding a spring. It only needs a little effort to complete the adjustment, which can be said...