Constant force spring reel

Дом > Constant force spring reel

How to find the best Variable force spring suppliers: Variable force springs are an important component in many machines and devices. If you need a quality variable force spring, it is important to find a good supplier. What are variable force springs and what are they used for? Variable force springs are a type of spring that is used to create a variable amount of force. This type of spring can be used in a number of different applications, including automotive, aerospace, and medical devices. What are the benefits of using variable force springs? Variable force springs offer a number of benefits for both manufacturers and consumers. For manufacturers, they can be used to create a variety of products with different spring forces, allowing for greater flexibility and creativity in product design. This also makes it easier to accommodate the needs of different consumers, as they can select the product with the force that is most comfortable for them. Variable force springs also have a longer lifespan...

Torsion springs: where are they used and why did you choose to utilize them?: There are many types of springs, but the most common are torsion springs. The design of torsion springs is optimized to maintain maximum rotational pressure between two surfaces, these helical or helical springs are usually adhered to the coils at both suspended ends. These ends are connected to external components, which are then rotated to apply bending stress. Unlike other springs, torsion springs are ideally balanced and able to withstand twisting, giving them a place in many industries. Made of various coated metals such as stainless steel, carbon, titanium, nickel or copper alloys, torsion springs are usually wound around a shaft to further increase its stability. The basic principle of a torsion spring is to retain energy as the spring assembly twists. When this is applied, torque is applied in the opposite direction to the deformation angle. This allows energy to be stored and released when necessary, and the torsion spring also secures the mechanism when necessary. ...

Analysis on the causes of carbon brush fault of generator set: In recent years, several safety briefings have successively reported shutdown accidents caused by carbon brush or rotor collector ring failure of large generator units, resulting in great economic losses to the enterprise.Carbon brushes are motor brushes. Improper maintenance and use of the carbon brush of the generator set during operation will cause accident load reduction or even shutdown. Factors leading to carbon brush fault Electromagnetic factors : when reactive or excitation current is adjusted, the spark of carbon brush has obvious change. When the exciter commutates, the contact between the carbon brush and the commutator is not good, and the contact resistance is too large ; the uneven thickness of the oxide film of the rectifier or slip ring causes the unbalanced distribution of carbon brush current ; or sudden change of load and sudden short circuit lead to abnormal voltage distribution between commutators ; unit overload and imbalance ; carbon brush selection is unreasonable, carbon brush spacing...

Design of Constant Force Spring in Spool Damper: When powered by a damped constant force spring mounted on the spool, there are several key principles that influence the design of linear motion applications. These principles support robust and consistent performance of products in a variety of applications, including automotive and aircraft interiors, industrial machine components, and many other user interface applications. The example components shown above will be cited as examples of the various design principles detailed below. This example assembly has a sliding drawer (shown in red) powered by a constant force spring mounted on a spool (spool in green; constant force spring shown in yellow) running within a mounting base (shown in grey), such as a central Console a car. A ratchet or door latch mechanism (not shown) can be implemented to allow the tray to be locked in place with a single press by the user. This example is a typical set of applications used in the automotive industry. 1. Preload spring ...

Constant force springs applied in wall mounted accessories: As more and more people spend more and more time using computers, computer users spend more time sitting or standing at their desks or workstations in front of devices. Keeping what experts call "the best ergonomic positioning" can improve energy levels and overall comfort. For this purpose, the input and output devices must be placed in appropriate positions. The proper position can reduce the muscle strain of the user's arm and effectively prevent various musculoskeletal diseases, including carpal tunnel syndrome, neck pain, and upper and lower back pain. The attachment bracket can be used to facilitate the support and position adjustment of the fixed attachment. The attachment retainer allows simple three-dimensional adjustment of two such devices to place the devices in a more ergonomic relative position to meet the needs of various users and workspaces, and has a balancing mechanism for balancing the weight of fixed attachments. The balance mechanism provided by the wall mounted accessories is superior to the traditional lifting system,...

Constant force spring applied to the brake for remote surgery: Minimally invasive medical technology is used to reduce the number of foreign tissues that may be damaged during diagnosis or surgery, so as to reduce the recovery time, discomfort and adverse side effects of patients. The surgeon can operate the controller on the console to indirectly operate the instrument connected to the remotely operated actuator. The instrument can be disassembled from the remotely controlled actuator, so that the instrument can be disinfected separately and selected to be used as the instrument required for surgery. Combine. Instruments may be changed during surgery. Using remote instruments for surgery brings new challenges. One problem is to provide a remotely operated motor mechanism that supports a remotely operated actuator that can be positioned relative to a patient. These features are quite heavy and may weigh between 12 and 24 kilograms. The mechanism must be moved over the patient and carefully positioned. Therefore, it is necessary to balance the surgical instrument, the associated actuator, and the support structure so...

Power spring in the design of the car covers: Car covers are commonly used automotive protective articles, but the folding and storage of car covers is a troublesome thing. In order to solve this problem, invention lovers have done a lot of useful exploration and put forward many solutions. One kind of scheme is to use power to drive the reel to directly roll up the car cover cloth. Using the reel to directly roll up the car cover cloth can achieve the purpose of rapid retraction of the car cover, but there are the following problems in actual use: first, the winding and friction of the reel when directly rolling up the car cover cloth wear the car cover cloth greatly; second, in order to adapt to the width of the car cover cloth, the width of the car cover retracting device must be close to the width of the car cover cloth. If it is too narrow, it will increase the winding of the car cover cloth,...

Application of variable force springs in fireplace up-down slide door: Fireplaces are freestanding or wall-mounted indoor heating devices, powered by combustible materials, with internal chimneys, originating from Western homes or palace heating facilities. Because its fuel is a renewable resource, modernized and improved, it is still commonly used in the West, and is especially popular among the higher education class, which advocates environmental protection. Fireplaces can also be installed in ordinary homes, and are perfectly achievable for small flats. The fireplace in modern homes is certainly not the firewood burning in the living room of a large villa that we see in the movies and TV, burning a fire and emitting the sound of a "blazing" star. In colder climates, the fireplace has always been the main feature of a home, as it gives people warmth to survive the long winter hands. The feeling of warmth from the baking, and the jumping and flickering flames, even today, still make people feel happy in cold weather. The warmth of a...

Constant force spring reel Product

Услуги по сборке и монтажу: Компания Qianye не только обеспечивает производство прецизионных пружин, но также фокусируется на конструктивном исполнении и функциональных решениях всей пружинной системы и может обеспечить полный комплекс производства и сборки системы.

Пружина угольной щетки: Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...

Пружина постоянной силы: Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...

Пружина переменной силы: Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.

Услуга оптимизации дизайна: From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.

Пружина постоянного кручения: Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...

Constant force spring reel News

Пружинный двигатель с постоянным крутящим моментом: A constant torque spring motor is a strip of prestressed spring material that forms a coil and is stored on a small storage drum. The free end is then pinned and rewound onto the larger output drum; this is the "winding" part of the constant torque spring cycle. When the output drum is released, the spring will return to the storage drum to assume its natural curvature, rotating the output drum and providing an almost constant torque. Constant torque springs are made of type 301 high quality stainless steel and are supplied in coil form for mounting on the motor drum. Its main features are: 1. Long time deflection under almost constant torque. Positive or limited negative gradients can be achieved. 2. Minimal inter-coil friction and resulting hysteresis, which is common in power springs. 3. Rotary motion is provided directly from the output drum or linear displacement by using cables and spools. Many applications utilize constant torque spring motors, such as: cord retractors, balance retrieval and return applications, drive motors, cordless curtains, and more. The spring features a high turn design, making it ideal for balancing applications. When they are fully turned, the springs apply a constant torque. You can also guarantee high torque levels. This is due to their compactness and high efficiency. The function of the constant torque spring motor depends on the design. The size of the spring can vary. Therefore, they make them suitable for use in a variety of applications. We strongly recommend that you consult...

7 tips for maximizing spring cycle life: Spring is a kind of mechanical part that uses elasticity to work. The parts made of elastic materials deform under the action of external force, and return to the original state after removing the external force. Also known as "spring". It is generally made of spring steel, and the types of springs are complex and diverse. The following tips to maximize the service life of the spring are also of great concern to you! 1. Lower Stress, The Better! In the early design stages of a spring, try designing with a larger wire diameter or a lower final load to allow more room for the spring to improve cycle life. 2. Shot Peening A shot peened spring can handle more stressful conditions than unpeened springs. This process can greatly improve performance and sustainability. 3. Keep Cool Spring relaxation or loss in spring load occurs faster in high temperature applications due to stress over time. Reducing operating temperatures can reduce the chances of spring relaxation. 4. Using The Right Material Material selection of a spring is key to good spring design. Consult with a Lee Spring Engineer to determine if upgrading to a higher tensile range or quality grade material can improve cycle life for a particular application. 5. Minimize Shock Loading Shock loading occurs when a load is applied with sufficient speed for the first coils of the spring to take up more of the load than what would be calculated for a static situation. The more times a spring...

Small spring has great effect: The reason why the world we live in is so orderly is that there are precise links between large and small objects. So many things in life are crucial. Whether they are large or small, they are indispensable to our life, but some small parts in life are unknown, but there are tens of thousands of them. The spring I know is also one of them. It always exists in a position that people can't see and does their own thing silently. Moreover, he exists everywhere in life, even if we don't know it. Today, I will explain the functions of these small springs. Spring is a kind of mechanical part that uses elasticity to work. Generally made of spring steel. Although the spring is small, as a general basic part, it has large quantity, wide range and complex varieties. It is used to control the movement of mechanical parts, mitigate impact or vibration, store energy, measure the size of force, etc. it is widely used in machines and instruments. The application field involves almost all fields of the national economy. Spring plays a big or small role in all articles in our life. It also has different shapes and structures because of different force values. However, according to the force value, people still divide it into three categories: constant force spring, power spring and variable force spring. Its working principle is to use one of its characteristics. It deforms it by applying force and will also try to return to its original state. Let me show you how springs...

Constant force spring applied to the brake for remote surgery: Minimally invasive medical technology is used to reduce the number of foreign tissues that may be damaged during diagnosis or surgery, so as to reduce the recovery time, discomfort and adverse side effects of patients. The surgeon can operate the controller on the console to indirectly operate the instrument connected to the remotely operated actuator. The instrument can be disassembled from the remotely controlled actuator, so that the instrument can be disinfected separately and selected to be used as the instrument required for surgery. Combine. Instruments may be changed during surgery. Using remote instruments for surgery brings new challenges. One problem is to provide a remotely operated motor mechanism that supports a remotely operated actuator that can be positioned relative to a patient. These features are quite heavy and may weigh between 12 and 24 kilograms. The mechanism must be moved over the patient and carefully positioned. Therefore, it is necessary to balance the surgical instrument, the associated actuator, and the support structure so that the surgical instrument can be safely and easily positioned. The constant force spring is made of stainless steel strip, so that when it is rolled up relative to being stretched, the spring will relax in a low stress state. When it unfolds, the restoring force mainly comes from the part close to the loosened spring coil. Specifically, the force comes from the region that transitions from a circle to a plane. The force does not come from the part of the drum that is fully unfolded or still winding. The resultant force is almost constant because the geometry of this area...

Constant Force Springs: The extension type of Constant Force Spring represents the most basic, yet most versatile, type of constant force spring. It is a pre-stressed flat strip of spring material which is formed into virtually constant radius coils around itself or on a drum. When the strip is extended (deflected) the inherent stress resists the loading force, the same as a common extension spring, but at a nearly constant (zero) rate. A constant torque is obtained when the outer end of the spring is attached to another spool and caused to wind in either the reverse or same direction as it is originally wound. The full rated load of the spring is reached after being deflected to a length equal to 1.25 times its diameter. Thereafter, it maintains a relatively constant force regardless of extension length. The load is basically determined by the thickness and width of the material and the diameter of the coil. Qianye Spring offers a stock of constant force springs in a variety of life cycle ranges. Each spring is a coil of high-yield Type 301 stainless steel band that exerts a nearly constant binding force to resist unwinding. We can also provide custom constant force springs to your specifications. Guide to Mounting Constant Force Springs A Constant Force Spring is usually mounted by first tightly wrapping it on a drum, then attaching the free end to the loading force such as in a counterbalance application. This relationship can also be reversed. 1.The drum diameter should be 10% to 20% larger than its natural inside diameter. 2.One...

Application of power spring in electric vehicle charging station: As the times change, gas stations are gradually replaced by electric vehicle charging stations. We have always been a natural partner for designers and manufacturers of electric vehicle charging stations, because they need to be compact, clean and provide trouble free cable management solutions for their electric vehicle charging stations around the world. By applying our power spring to the retractable cable drum, the cable wear is reduced, the tangled cable is eliminated, and the cable can be neatly stored when not in use. In this way, we help EV charging station developers shape the future of safe and trouble free charging of electric vehicles. The natural expansion trend of the power spring gives a torque to the spindle or case, resulting in a usable torque. The generated torque is cumulative, so the torque will increase as the spring is tightened and decrease as the spring is loosened. Torque and total number of turns are the most important output requirements in the design of power spring. The performance of the power spring depends on the size of the spring material (thickness, width and length) and the available space (shell and spindle diameter). Qianye precision can provide customized spring design solutions. Use our design to specify your requirements,as a spring manufacturer, our customized spring performance meets your expectations. Make the product balance various charging cables. When the user walks back to the charging end, the cable drum pulls back the middle of the charging cable. It makes it easier for users to return the charging cable to the charging station after charging the vehicle, which ensures that the...

Application of Power Spring in Gas Station: The gas station is a familiar place for everyone. Do you find that the lines of the gas gun are all exposed when passing through the gas station or entering the gas station to refuel? They look messy and unsafe. The car needs to refuel, so you have to go to the gas station to refuel. With the continuous growth of car owners, the passenger flow of gas stations is also increasing. Have you seen the news of the gas station explosion? After a car in a gas station was refueled, due to the negligence of the Refueller, the Refueller did not take out the refuelling gun from the fuel tank port, and the driver of the owner did not check the surrounding conditions of the car, so he started the car. Then the car drove the refueling gun and oil line, pulled down the refueling end connected with it, and caused an explosion. This kind of news is very sad. Once an explosion accident occurs in the gas station, it may cause the explosion of the whole oil tank in the station. Its power is very huge, and the personnel in a certain range around may be seriously threatened. It is understood that the lines of gas guns in foreign gas stations use money collection devices. Now there are a small number of applications in China. At present, there is no large-scale application in gas stations. It uses the characteristics of winding up. It can bring a free contraction process to the line group, and make its winding easier...

Constant force spring damper: Dampers are widely used in building structures to dissipate energy and reduce vibration. However, the traditional damper has complex structure, poor durability and corrosion resistance, and low working stability. After using for a period of time, the damper is prone to aging and deformation can not be restored, so it can not be used anymore. Most of the existing dampers use shape memory alloy (SMA), which is a material composed of more than two kinds of metal elements through thermoelasticity, martensitic transformation and its inversion; Using shape memory alloy, the damper can automatically restore to its original shape after deformation, which is used for the restoration of building structures after deformation. However, the existing dampers only use the performance of shape memory alloy (SMA) wire itself, and the cost is expensive, which is not conducive to the large-scale use of dampers. The design of constant force spring can be added to the self resetting damper. The damper includes piston parts, U-shaped plates and moving rods. The constant force spring is set between the tension moving rod and the pressure moving rod. The constant force spring tightens the tension moving rod and the pressure moving rod to be close to each other, so that the tension moving rod and the pressure moving rod respectively lean against the end close to each other in the corresponding sliding hole. It is conducive to the large-scale use of self resetting dampers. Constant force spring is a kind of functional material with high ductility, which has the advantages of constant load, high energy storage density, low friction loss and so on....

Телефон

+86 13827443413
Эл. адрес

sales@qianyejm.com
предложение
WhatsApp