domov > Computer Monitors Springs
Application of constant force spring in refrigerator door
Application of constant force spring in refrigerator door
In order to make the refrigerator operate effectively, the door should be kept closed. Keep the door open for a short time when putting or taking out food. However, opening it for a long time will affect its cooling and endanger food safety. It will also lead to excess power consumption. Fortunately, the modern refrigerator door can be added with a constant force spring to automatically close after you open the refrigerator for use. Nowadays, this kind of design is relatively rare in the market. It is generally a magnetic refrigerator door, which explains why the magnet is attached to it.   We have seen that it is essential to keep the refrigerator door closed all the time. If the door remains open for a long time, it will counteract the internal temperature balance and affect the quality of the food stored in it.When this situation continues for a long time, the compressor cannot maintain a low internal temperature. This undermines...
Application of power spring in draw-wire encoder
Application of power spring in draw-wire encoder
A draw-wire encoder, also known as a string potentiometer, pull wire position sensor, cable extension displacement sensor, or yo-yo potentiometer. It is a cable driven position or displacement sensor for linear position measurement and velocity using a flexible cable (wire) and a spring loaded spool.   The string pot or cable extension sensor is composed of four main components in the shell: 1. High strength stainless steel cable (rope or steel wire rope); 2. Equal diameter spool (drum); 3. Power spring with high torque and long service life; 4. Rotary potential precision sensor.   In the shell of the sensor, a soft high-strength stainless steel cable is tightly wound on a precision machined cylindrical drum (or spool) with constant diameter, which rotates with the winding and unfolding of the measuring cable. In order to maintain the tension and retraction of the steel wire, the spring is connected to the drum. Then connect the spool to the shaft of the rotary potential precision sensor (or encoder). When the...
Application of power spring in electric vehicle charging station
Application of power spring in electric vehicle charging station
As the times change, gas stations are gradually replaced by electric vehicle charging stations. We have always been a natural partner for designers and manufacturers of electric vehicle charging stations, because they need to be compact, clean and provide trouble free cable management solutions for their electric vehicle charging stations around the world.   By applying our power spring to the retractable cable drum, the cable wear is reduced, the tangled cable is eliminated, and the cable can be neatly stored when not in use. In this way, we help EV charging station developers shape the future of safe and trouble free charging of electric vehicles. The natural expansion trend of the power spring gives a torque to the spindle or case, resulting in a usable torque. The generated torque is cumulative, so the torque will increase as the spring is tightened and decrease as the spring is loosened. Torque and total number of turns are the most important output requirements in the design of power...
Power springs used in recoil start systems
Power springs used in recoil start systems
 Small engines are well known and are commonly used in lawn mowers and garden tractors and various other garden and lawn maintenance tools, in addition to other environments. Typically, each of these engines is equipped with a recoil starting system that includes a rope that rotates the starting mechanism to engage a flywheel that is connected to the engine for starting purposes. Once the rope starter is pulled, the recoil mechanism is always provided with the engine to reel the starter rope back to the starting mechanism.   The recoil portion of the starter mechanism is operated by a power spring that tensions when the operator pulls on the starter rope. Once the rope is fully pulled, the operator releases it. Most power springs on the market often fail, so the recoil rewinding mechanism needs to be disassembled and the spring replaced. And replacing the spring is a tedious task because the operator needs to keep the spring in the cavity inside...
Variable Force Springs In New Point Of Purchase Display
Variable Force Springs In New Point Of Purchase Display
Automatic advance shelves are more widely used in stores and people's lives, and are more often used for displaying and placing goods (incense hata, rosemary, etc.). However, the conventional shelf propeller has one end of the baffle on both sides fixed and the other end movable. Although in use, after the first row of goods is taken away, the second row of goods will be automatically pushed to the first row, which can save the staff's finishing time, but in the process of pushing the goods, it is easy to cause the goods in the back row to pop out of the display slot due to the activity of the ends of the shelf advancer on both sides of the stopper, which brings inconvenience to the use.   To provide a new type of shelf propeller for the problem of the shortcomings of the existing technology. The new shelf propeller includes a base plate, a side plate, a push plate...
Qianye Precision Cordless Blind Spring
Qianye Precision Cordless Blind Spring
 Imagine, on the weekend of a busy work week, unloading from work, taking a hot bath, having a leisurely dinner, and when it's time to rest, draw the curtains to isolate the noisy world outside, and then, beautiful and beautiful Sleeping until you wake up naturally, this is not the most important thing for every office worker.   However, for families with children, curtains have increasingly become a new safety hazard, especially for families with roller shutters. The pull rope of the roller blind is usually closed at the bottom or the side. If it is not fixed, the rope will slide down to form a loop, which is easy to wrap around the neck of the child, causing the child to suffocate, and even lead to death in severe cases. It is reported that there are many cases of suffocation and death of children due to rope entanglement accidents every year, mostly children under the age of 4. The...
A constant torque spring can play such a big role in the take-up device
A constant torque spring can play such a big role in the take-up device
Constant torque springs can help take up the wire and are used in many products. All electrical products have a cord set that is connected to the power supply, but this power cord will bring some trouble to our arrangement. The function of the constant torque spring is this, it can bring a free shrinkage process to the electrical cord set , making it easy to take up the line, very practical. When the external force reverses the constant torque spring from the natural state to the output wheel, once the external force is removed, the constant torque spring will be rolled back to the natural state, and a constant torque will be generated in the output wheel at the same time. Constant torque spring can be used in automatic winding, balance weight and power source, such as automatic winding device of power line. Advantages of constant torque spring over power spring: 1. The torque will not change as the number of turns increases. 2. There is no limit on the number of...
Computer Monitors Springs Product
 Vzmet karbonske ščetke
Vzmet karbonske ščetke
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Vzmet s konstantno silo
Vzmet s konstantno silo
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Storitve montaže in montaže
Storitve montaže in montaže
Podjetje Qianye ne zagotavlja samo proizvodnje natančnih vzmeti, ampak se osredotoča tudi na strukturno zasnovo in funkcionalne rešitve celotnega vzmetnega sistema ter lahko zagotovi celoten sklop sistemske proizvodnje in montaže
 Storitev optimizacijskega oblikovanja
Storitev optimizacijskega oblikovanja
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.
 Vzmet s spremenljivo silo
Vzmet s spremenljivo silo
Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.
 Power Spring
Power Spring
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
Computer Monitors Springs News
 A dog walker from Qianye Precision
A dog walker from Qianye Precision

Čas: 2022-9-14

As everyone who knows our company knows, our company also has another product, that is, dog walker! The power spring is the core and main component of the dog walker. The power spring is made of 301 stainless steel with high precision and high hardness. Its thickness tolerance is controlled in the range of 0.01mm and its hardness is hv580 degrees. The service life of the dog walker can be extended to 30000 to 100000 times. When this power spring is applied to the dog walker, the quality of the dog walker has been greatly improved. When walking the dog, we need to pay attention to bring the dog's little partner - the dog walker, and then the obedient dog should also bring the dog walker. Don't expect the bridge section of the dog looking for the master in the movie to happen. Before using this kind of traction rope, I always used a fixed 1.5m long rope. Usually I use the traction rope to prevent dogs from running around and attacking pedestrians. But there was once a time when walking a dog. Now many shared bicycles and electric vehicles often shuttle back and forth at a fast speed when walking around the corner. An electric motorcycle brushed past the dog. Fortunately, after the rope was shortened, it was able to effectively protect the dog and prevent accidents. However, many friends would say that it would be good to buy a shorter rope? But in fact, many times we need to give dogs enough range of activities, so this time can reflect...
 Odlične lastnosti vzmeti Qianye
Odlične lastnosti vzmeti Qianye

Čas: 2022-9-14

Spring is a kind of mechanical part that uses elasticity to work. The parts made of elastic materials deform under the action of external force, and return to the original state after removing the external force. It is generally made of spring steel, and the types of springs are complex and diverse. Qianye company has strong production strength and a number of senior technicians, who can assist in product design, development and proofing according to your customers' needs, so as to find the best solution for your products to meet your application needs. All kinds of springs produced by the company are at the leading level in the same industry and enjoy high reputation. They have been favored and praised by customers all the time. The excellent features of the product mainly include: (1) Using high-quality raw materials at home and abroad, there is no problem of weak elasticity and poor hardness stability caused by raw materials. (2) The high-precision slitting machine has high precision and stable quality, and there is no problem of large deviation of material width and size. (3) The high-precision edging machine has no burrs around. There is no need to worry about hurting the operator and supporting products during installation and use. (4) The self-developed stretch forming process (invention patent has been obtained) and forming equipment are self-developed and manufactured by our company, and the produced spring greatly increases the service life of the spring. (5) High temperature heat treatment has uniform surface color, stable tensile strength and strong fatigue resistance. (6) After 24-hour pressure test, the quality is guaranteed. (7) In terms of price, the factory...
 Vzmetni motor s konstantnim navorom
Vzmetni motor s konstantnim navorom

Time:2022-9-3

 A constant torque spring motor is a strip of prestressed spring material that forms a coil and is stored on a small storage drum. The free end is then pinned and rewound onto the larger output drum; this is the "winding" part of the constant torque spring cycle. When the output drum is released, the spring will return to the storage drum to assume its natural curvature, rotating the output drum and providing an almost constant torque.        Constant torque springs are made of type 301 high quality stainless steel and are supplied in coil form for mounting on the motor drum. Its main features are: 1. Long time deflection under almost constant torque. Positive or limited negative gradients can be achieved. 2. Minimal inter-coil friction and resulting hysteresis, which is common in power springs. 3. Rotary motion is provided directly from the output drum or linear displacement by using cables and spools.        Many applications utilize constant torque spring motors, such as: cord retractors, balance retrieval and return applications, drive motors, cordless curtains, and more. The spring features a high turn design, making it ideal for balancing applications. When they are fully turned, the springs apply a constant torque. You can also guarantee high torque levels. This is due to their compactness and high efficiency.        The function of the constant torque spring motor depends on the design. The size of the spring can vary. Therefore, they make them suitable for use in a variety of applications. We strongly recommend that you consult...
 [Qianye Precision]Prednosti vzmeti s konstantno silo
[Qianye Precision]Prednosti vzmeti s konstantno silo

Čas: 2022-9-15

 The unique quality of constant force spring makes it a perfect balance for heavy moving parts. If your equipment requires springs, consider constant force springs. This is a kind of tension spring. They do not obey Hooke's law, so their force remains unchanged, even when deflected. Constant force spring can be used in almost all kinds of products. Some of the largest consumers are medical device manufacturers. Machines, dental X-ray equipment - and almost any articulated and heavy equipment - are equipped with constant force springs. Smaller constant force springs for medical devices are also part of syringes and drug injectors. We can also find a large number of constant force springs in daily necessities, such as retractable key chain, retractable dog rope, vacuum cleaner, thread winder, safety belt, window balance system, indoor shutter and monitor lifting and so on. Due to the flat force curve of constant force spring, constant force spring is suitable for applications requiring stable motion range and constant load. To learn more about this type of spring and see if it can be used in your device or application, please contact our engineer.       So what are the advantages of constant force spring?       1. Small space requirements;       2. Provide a stable range of motion;       3. No inertia can be overcome;       4. Install to existing hardware;       5. Produce a balance effect.    Because of these advantages, constant force springs have sufficient versatility and can be used in many applications that require constant load to balance,...
 Constant force spring is used in removing an implanted object using laser cut hypotubes
Constant force spring is used in removing an implanted object using laser cut hypotubes

Čas: 2022-9-14

Removal or extraction of the lead may be difficult. As mentioned above, the body's natural healing process forms scar tissue over and along the lead, and possibly at its tip, thereby encasing at least a portion of the lead and fastening it even more securely in the patient's body. In addition, the lead and/or tissue may become attached to the vasculature wall. Both results may, therefore, increase the difficulty of removing the leads from the patient's vasculature. A device for removing an implanted object from a body vessel, may comprise a sheath assembly comprising an outer sheath assembly and an inner sheath assembly, and a pin, the outer sheath assembly comprising an outer sheath and an outer band, the outer band coupled to the pin, the inner sheath assembly comprising an inner sheath and a tip, wherein the tip has a cutting surface, the inner sheath comprising a proximal end and a distal end, wherein the distal end of the inner sheath is coupled to the tip, the tip comprising a cam slot for receipt of and cooperation with the pin, and a handle assembly comprising a trigger and a barrel cam cylinder, the trigger comprising a trigger pin, the barrel cam cylinder comprising a barrel cam cylinder slot for receipt and cooperation with the trigger pin, wherein the proximal end of the inner sheath is coupled to the barrel cam cylinder such that upon the trigger pin moving proximally in a longitudinal direction, the barrel cam cylinder rotates in both a clockwise direction and a counter clockwise direction, thereby...
 Application of variable force springs in fireplace up-down slide door
Application of variable force springs in fireplace up-down slide door

Čas: 2022-9-14

Fireplaces are freestanding or wall-mounted indoor heating devices, powered by combustible materials, with internal chimneys, originating from Western homes or palace heating facilities. Because its fuel is a renewable resource, modernized and improved, it is still commonly used in the West, and is especially popular among the higher education class, which advocates environmental protection. Fireplaces can also be installed in ordinary homes, and are perfectly achievable for small flats. The fireplace in modern homes is certainly not the firewood burning in the living room of a large villa that we see in the movies and TV, burning a fire and emitting the sound of a "blazing" star.   In colder climates, the fireplace has always been the main feature of a home, as it gives people warmth to survive the long winter hands. The feeling of warmth from the baking, and the jumping and flickering flames, even today, still make people feel happy in cold weather. The warmth of a fireplace is incomparable to that of an air conditioner, and I'm not talking about the psychological effect, which is in fact the case. Compared to air conditioners, fireplaces heat up quickly and the warmth of a real fire is comforting and relaxing. The variable force springs used in the fireplace up-down sliding doors because when the door is closed, the spring force is less than the weight of door; while the door in middle stroke, the spring force is equal to the door weight. When fully open, the spring exerts force greater than the door weight to secure the door does not...
 Application of power spring in aircraft luggage compartment
Application of power spring in aircraft luggage compartment

Čas: 2022-9-14

Luggage compartments in the aircraft cabin are usually located above the heads of seated passengers. To ensure optimum headroom between luggage compartments on the one hand, and to facilitate loading on the other hand, aircraft luggage racks can be lowered from shell luggage compartments or trays in certain applications. When lowered, the front of the luggage compartment opens for loading. A luggage compartment with a lowered housing for an aircraft, wherein the lowered housing is connected to a pulley attached to a support structure of the aircraft by a cable. In order to lower the shell, when the rope lifts the shell on the pulley, the rope is released from the pulley, in which the pulley is biased by the force of the power spring along the rotation direction of the rope wound on the pulley. The power assistance for the pivoting of the luggage cover is realized as a spring device. This solution can achieve low maintenance and wear-free equipment in every case.   The natural tendency to expand of the power spring imparts a moment to the arbor or case, resulting in usable torque. The torque produced is cumulative, so the torque increases as the spring is tightened and decreases as the spring is loosened. Power springs that can be assembled into the customer's housing for immediate assembly, or a retaining ring is provided for transferring the spring into the customer's housing. Power spring torque and total turns are the most important output requirements in power spring design. The performance of a power spring depends on the size of the spring material (thickness, width and length) and available space (housing and mandrel...
 Advantages of Qianye power spring in electrical take-up
Advantages of Qianye power spring in electrical take-up

Čas: 2022-9-14

As we all know, take-up spring can help take-up. It is used in many electrical products, and hair dryer is no exception. However, all such household appliances have a common feature, that is, they need a wire group to connect the power supply. However, this power line will bring some trouble to our sorting. The function of winding up lies in this. It can bring a free shrinkage process to the electrical wire group and make its winding up easy and practical. In fact, although the process of electrical wiring is not a high-end principle, it is better than cleverness. Its working principle is not complicated. It uses the spring box to limit the outer diameter, so that the center of the spring is connected with the power shaft. When the line is pulled out, it can make the shaft and the spring rotate relatively, and the spring will roll on the power shaft and store the corresponding kinetic energy. When the external force disappears, the spring will generate torque to drive the power shaft, so that the line can be retracted back into the box. In the take-up function of the reel, the effect of the power spring can not be underestimated. It can often help the required goods to take up the line quickly and simply, and become an auxiliary software favored by people. It is also due to the spring to store kinetic energy. It uses the characteristics made by the spring bearing force, and effectively uses its mechanical energy storage and driving force output, so that...