domov > Curtain spring
Application products of variable force spring
Application products of variable force spring
   Variable force springs and variable torsion springs can expand negative gradients and positive gradients to form a single spring. It breaks through the influence of the traditional spring affected by Hooke's law, so that the stroke and force are no longer proportionally increased, but accompanied by various elastic force-displacement combinations, such as negative slope. Therefore, a stepped constant force can be achieved. Variable force springs and variable torsion springs can be customized for various elastic curve changes according to specific applications. What products can the curve changes of variable force springs be used for?      Pen Type Drug Syringe Application The spring exerts a constant force to keep the drug flow in place, preventing patient discomfort during use. It has a stretch at the end of the stroke to ensure that all of the medication can be fully injected.      up and down sliding door     When the door is closed, the spring force is less than the door...
Physical principle behind constant force spring
Physical principle behind constant force spring
When you walk into your office building on your way to work every day, or into your local bank, or any commercial facility, you may open a heavy glass door. When you cross the threshold, the door closes behind you, and you don't think about it. However, the heavy glass door was probably closed by a constant force spring. Constant force springs are widely used in daily applications. From door closers to rope and hose retractors, to sports equipment, toys, motors, etc., constant force springs exert force at an amazing high frequency and consistency. Let's take a closer look at the basic physics behind the constant force spring. In the 17th century, the British physicist Robert Hooke proposed a formula for force and elasticity, which is now called Hooke's law. Hooke's law states that the force (f) required to stretch or compress a spring for a distance (x) varies linearly in proportion to that distance. The formula is f=kx, where k is a...
Design of constant force springs
Design of constant force springs
 A constant force spring is a spring that exerts a constant force over its range of motion. That is, it does not obey Hooke's law. Typically, a constant force spring is constructed as a coiled band of spring steel so that the spring relaxes when fully coiled. When it is unrolled, the restoring force comes mainly from the portion of the belt that is close to the roll. Since the geometry of this region remains nearly constant as the spring unfolds, the resultant force is nearly constant.       By creating a spring with a variable pitch, you can make a push-shape spring with a constant velocity. Placing a larger pitch in a larger outer diameter coil and a smaller pitch in a smaller outer diameter coil will force the single spring to fold all coils at the same rate when compressed.       Design of Constant Force Springs: A constant force spring is a coil of prestressed...
Tradicionalne močne vzmeti in prednapete vzmeti
Tradicionalne močne vzmeti in prednapete vzmeti
   Traditional power springs and preloaded power springs are fabricated from spring steel bars to provide torque. Spring steel is a low alloy, medium carbon steel or high carbon steel with a very high yield strength. Objects made of spring steel can return to their original shape despite significant bending or twisting. Power springs use flat (unstressed) steel windings, while pre-stressed power springs use pre-stressed steel to produce a larger range of usable torque than conventional power springs.        During the manufacturing process, the spring is wound into the retaining ring or the customer's housing (the retaining ring is pictured below). When ready for final installation, carefully install the spring into its housing with the outer end attached to the outer edge and the inner end attached to the mandrel (see photo below). During operation, the housing or mandrel will be fixed while the other component is free to rotate. Depending on the requirements of your specific design,...
Prednosti brezžičnih vzmetnih komponent Qianye
Prednosti brezžičnih vzmetnih komponent Qianye
All curtain cords, whether installed on the side, caught in curtains, or placed on the back, can be dangerous to children. It is best to replace all corded curtains with cordless curtains in houses where children live or visit, especially in children's bedrooms and play areas. Cordless roller blinds with either a spring system or an electric system can improve the safety of the home.        Cordless roller blinds with spring system are similar to movie curtains. They use the elasticity of the springs. Under the action of the spring components, the roller blinds can be balanced at any position and can be stopped at any time.        At present, most of the spring components on the market are wire spring cordless curtain systems, which have a relatively short service life and a high degree of force attenuation. When pulling down, the curtain stops at each clip, and when rising, pulling down makes the curtain bounce...
Constant force springs applied in wall mounted accessories
Constant force springs applied in wall mounted accessories
As more and more people spend more and more time using computers, computer users spend more time sitting or standing at their desks or workstations in front of devices. Keeping what experts call "the best ergonomic positioning" can improve energy levels and overall comfort. For this purpose, the input and output devices must be placed in appropriate positions. The proper position can reduce the muscle strain of the user's arm and effectively prevent various musculoskeletal diseases, including carpal tunnel syndrome, neck pain, and upper and lower back pain.   The attachment bracket can be used to facilitate the support and position adjustment of the fixed attachment. The attachment retainer allows simple three-dimensional adjustment of two such devices to place the devices in a more ergonomic relative position to meet the needs of various users and workspaces, and has a balancing mechanism for balancing the weight of fixed attachments.   The balance mechanism provided by the wall mounted accessories is superior to the traditional lifting system,...
Constant force spring is used in removing an implanted object using laser cut hypotubes
Constant force spring is used in removing an implanted object using laser cut hypotubes
Removal or extraction of the lead may be difficult. As mentioned above, the body's natural healing process forms scar tissue over and along the lead, and possibly at its tip, thereby encasing at least a portion of the lead and fastening it even more securely in the patient's body. In addition, the lead and/or tissue may become attached to the vasculature wall. Both results may, therefore, increase the difficulty of removing the leads from the patient's vasculature. A device for removing an implanted object from a body vessel, may comprise a sheath assembly comprising an outer sheath assembly and an inner sheath assembly, and a pin, the outer sheath assembly comprising an outer sheath and an outer band, the outer band coupled to the pin, the inner sheath assembly comprising an inner sheath and a tip, wherein the tip has a cutting surface, the inner sheath comprising a proximal end and a distal end, wherein the distal end of the...
Curtain spring Product
 Vzmet karbonske ščetke
Vzmet karbonske ščetke
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Storitev optimizacijskega oblikovanja
Storitev optimizacijskega oblikovanja
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.
 Vzmet s konstantno silo
Vzmet s konstantno silo
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Power Spring
Power Spring
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
 Storitve montaže in montaže
Storitve montaže in montaže
Podjetje Qianye ne zagotavlja samo proizvodnje natančnih vzmeti, ampak se osredotoča tudi na strukturno zasnovo in funkcionalne rešitve celotnega vzmetnega sistema ter lahko zagotovi celoten sklop sistemske proizvodnje in montaže
 Konstantna torzijska vzmet
Konstantna torzijska vzmet
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
Curtain spring News
 Zasnova in funkcija dvojne vzmeti ali vzmeti motorne krtače
Zasnova in funkcija dvojne vzmeti ali vzmeti motorne krtače

Čas: 2022-9-15

 One of the most unique spring designs is called a twin spring.  Its name is derived from the characteristic of having two springs formed from the same strip of stainless steel material.  These custom springs are intended to work together, in unison, doubling the force of a single spring.  Twin springs are a version of a constant force spring, providing constant force throughout the travel length.     The area between the two coils is referred to as the saddle area, which is formed to fit over the part or component that is being pushed.  The saddle can also be cut-out to provide access to the component and is best designed when assigned a dimension to fit over that specific part.  It can be located at different heights between the coils for ease of assembly or as an indicator for direction.     Twin springs are used in a wide range of applications where available space is limited and a relatively strong force is required.  Medical devices and surgical mechanisms incorporate this design to push or feed surgical staples in disposable skin staplers.  Electric motors utilize the twin spring to provide a constant force on the carbon brush, extending the life of the motor and increasing reliability and overall quality. These springs are also referred to as motor brush springs.     Advantages of twin spring:     1. Under the same elasticity, the double winding spring saves volume.     2. Because the shape is symmetrical, the output is more stable.     3. Increase the length of available carbon brushes.  ...
 Common Applications of Double Torsion Springs in Medical Devices
Common Applications of Double Torsion Springs in Medical Devices

Time:2023-3-11

Double torsion springs are widely used in medical devices due to their unique mechanical properties and reliable performance. Some common applications of double torsion springs in medical devices include: Surgical Instruments: Double torsion springs are often used in surgical instruments such as scissors, clamps, and forceps. These springs help to provide tension and control the movement of the instrument. Medical Implants: Double torsion springs are used in medical implants such as bone plates, screws, and pins. These springs help to maintain the proper positioning of the implant and prevent it from moving or shifting. Drug Delivery Devices: Double torsion springs are used in drug delivery devices such as autoinjectors and insulin pumps. These springs help to provide the force needed to deliver the medication. Patient Monitoring Devices: Double torsion springs are used in patient monitoring devices such as blood pressure monitors and electrocardiogram (ECG) machines. These springs help to provide the necessary tension to ensure accurate readings.     Diagnostic Equipment: Double torsion springs are used in diagnostic equipment such as ultrasound machines and X-ray machines. These springs help to ensure that the equipment is properly positioned and stable during use. Prosthetics: Double torsion springs are used in prosthetics such as artificial limbs and joints. These springs help to provide the necessary tension and flexibility needed for natural movement. Overall, double torsion springs play a critical role in the performance and reliability of many medical devices. Their unique mechanical properties, including their ability to store and release energy, make them an essential component in the design of these devices.
 Surface cleaning method of stainless steel spring
Surface cleaning method of stainless steel spring

Čas: 2022-9-13

The spring of thousand industry precision hair has excellent application in different fields, for example, the products of the company have been widely used in LCD display lifting bracket, automobile special motor, medical treatment, lifting fan, lifting window accessories, vacuum cleaner, sales rack and other fields. With the development of modern technology, stainless steel hairline, as a more common elastic element in modern technology, has a huge function and its application is becoming more and more obvious. The company is to provide professional stainless steel hair spring surface treatment methods. 1、 Two methods of removing oxide skin and oil pollution by spring are as follows: 1. Dilute the cleaning agent and clean water in ultrasonic equipment about 1:30. When the spring surface is free of oxygen, no oil and the metal color is appropriate, then take out water and clean it. In this way, the treated stainless steel hair surface can achieve the effect of sub light. 2. Dilute the cleaning agent and clean water as 1:1 or 1:2, and then immerse the stainless steel hair strip into the solution until the surface of the spring is free of oxygen and no oil to restore to the metal color. Then take out the water and clean it. After this treatment, the stainless steel hair surface is also used to achieve the effect of Matt. 2、 Two methods of bright surface of the spring are as follows: 1. The volume of spring and coarse abrasive is matched according to 1:3. The amount of cleaning agent is 1% to 2% of the...
 Predtoplotna obdelava vzmeti
Predtoplotna obdelava vzmeti

Čas: 2022-9-15

Spring has been very common in people's daily production and life, ranging from planes, trains and cars to household appliances and daily necessities, and even children's stationery for school. It can be seen how important spring is to our life.     What is the definition of spring? It is a mechanical part that uses elasticity to work. Generally made of spring steel. It is used to control the movement of mechanical parts, mitigate impact or vibration, store and measure the size of force. It is widely used in machines and instruments.     For a professional spring manufacturer, the most basic production goal is to infinitely pursue the high quality of products. Therefore, in order to improve the performance of the spring, it is often assisted by pre heat treatment, that is, the process of strengthening the quality of spring steel is used to further strengthen the spring.     In fact, the so-called pre heat treatment is what we often call annealing. It is to heat the steel to a certain temperature and keep it warm for a period of time, and then cool it slowly. Annealing of steel is a heat treatment method in which the steel is heated to the degree of phase transformation or partial phase transformation, and then cooled slowly after heat preservation. The purpose is to eliminate the structural defects of the spring, improve the structure, homogenize the composition and refine the grain, improve the mechanical properties of the steel and reduce the residual stress; At the same time, it can also reduce the hardness,...
 Exposed Power Cord Solutions
Exposed Power Cord Solutions

Čas: 2022-9-14

As people are becoming more and more picky about the beauty of home appliances, the problems of dirt, vulnerability and difficult placement caused by the exposure of power lines have been unsatisfactory. However, with the take-up device, the wires are completely stored in the internal space after use, and these problems are solved. Its core component is the use of winding up. Take-up spring refers to a kind of rotary spring that puts the steel strip crimped once or twice into the fixed box, and then connects it through the middle mandrel to tighten it to the predetermined position. After releasing the preload when necessary, it uses the rebound force of the rolled steel strip to achieve the design purpose.     The utility model has the advantages that the utility model is designed for rotary use, and can be widely used in the circular design device, and forms a coaxial design with the take-up device, which saves space very much. Under the condition of well-designed, its maximum service life can reach 300000 times.     Parameters that must be provided for the design of take-up spring:     1. Inner diameter of installation box (d)     2. Diameter of intermediate mandrel (d)     3. Torque value (T)     4. Application range (NX ~ NY)     5. Service life requirements     6. Torque calculation of products     7. Product life calculation Shenzhen Qianye Precision Metal Co., Ltd. is a leading manufacturer of take-up and spring. It is a manufacturer specializing in providing high-precision spring. It...
 Advantages of Qianye carbon brush spring in motor
Advantages of Qianye carbon brush spring in motor

Čas: 2022-9-14

There are many kinds of carbon brush springs. Wired carbon brush springs also have steel belt carbon brush springs. The linear type is mainly compression spring and torsion spring. These springs are traditional springs. At present, the more famous motor manufacturers or electrical appliance manufacturers have begun to use steel belt carbon brush coil spring in the motor. The traditional compression spring and torsion spring are relatively backward and are generally used in low-cost carbon brush devices. The only advantage is that the price is cheap, which is several times lower than that of steel strip spring. However, the use of traditional spring in medium and high-end motors greatly reduces the product quality and competitiveness. Compared with the motor using traditional spring, the coil spring motor is completely two different concepts and quality, and the sound produced by the operation of the two motors is also different, making the service life even more incomparable. The use of carbon brush spring greatly improves the service life and stability of the motor. The traditional type of spring is not only noisy but also environmentally friendly. However, there are few domestic manufacturers that can really do a good job in carbon brush spring. Carbon brush spring needs a long time of production experience to produce high-quality carbon brush spring. Shenzhen Qianye Precision Metal Co., Ltd. has more than ten years of product R & D, production and manufacturing experience, and various application designs and solutions of spring. The advantages of carbon brush spring produced by Qianye in motor application are as follows: 1 Shorten the outer diameter of the motor...
 Uporaba vzmeti s konstantno silo v medicinski opremi
Uporaba vzmeti s konstantno silo v medicinski opremi

Time:2022-9-3

 A support device for assisting a patient is used to assist the movement of a patient at the patient support device. In the prior art, a caregiver would operate a patient lift or motor by guiding the lift to raise or lower the patient at the patient support. Such manipulations often require the precise manipulation of heavy forceps and motors by a paramedic to help the patient move around the patient support.        The support means may incorporate a constant force spring design, the support structure comprising a base and an upper portion extending upwardly from the base. The constant force spring assembly may include a carrier slidably coupled to the base secured to a first end of the carrier. The base may include channels that guide sliding movement of the carrier relative to the base of the support structure. The constant force spring assembly may also include a spool and a motor configured to drive the spool. The auxiliary belt may be secured to the spool so that the auxiliary belt is wound and unwound from the spool in response to a motor driving the spool. And the motor can be fixed to the carrier to move with the carrier.        Constant force springs get their name because their motion force is constantly applied. The load is determined by the width and thickness of the material and the diameter of the coil. The tightly wound rollers work in a linear motion, not obeying Hooke's law (F=kX), but constantly generating forces as they deflect.These springs provide...
 Today we’re going to talk about the connection between the constant force/tape spring and the tilting double or single hung window.
Today we’re going to talk about the connection between the constant force/tape spring and the tilting double or single hung window.

Time:2023-3-6

Today we're going to talk about the connection between the constant force/tape spring and the tilting double or single hung window.   As we know, hung windows feature a balanced application to counteract the weight of the sash, allowing the user to position the sash at the desired opening height. The balanced application also enables users to open and close windows with minimal effort.   Actually, the constant force/tape spring is a somewhat hidden component sitting inside the window frame of the tilting double or single hung window, it is the balanced application, sometimes called a sash balance, window spring, or window "balancer".   Window balances are only found in double-hung or single windows and counterbalance the weight of the sash assisting you with opening and closing your windows. If your window balances are damaged or broken, your window may be difficult to open, not open at all, or may not stay open.   Qianye Springs (Qianye Precision Spring Technology Co., Ltd) provide the high-quality constant force/tape springs. All our springs are made of 301 stainless steel which ensure the springs are durable and long-lasting.     More info:https://www.qianyespring.com/ mail: leah_lee@qianyejm.com Whatsapp: +86-181 7563 3483