domov > double torsion springs suppliers
"Constant force spring" is a necessary component for cable accessory manufacturers at home and abroad
"Constant force spring" is a necessary component for cable accessory manufacturers at home and abroad
With the increasing application of cold shrinkable cable accessories, constant force spring has become a necessary component for cable accessories manufacturers at home and abroad. How to find a suitable constant force spring in practical application? How to determine the continuous elasticity, magnetism and corrosion resistance of constant force spring has become the first consideration for cable accessory manufacturers and customers. Whether imported brand or domestic brand, the use of constant force spring for standard cable accessories has become a standard configuration, but the quality is uneven. Faults often occur due to factors such as material, type selection or performance. The corrosion resistance of constant force spring is related to the material and processing technology. The corrosion resistance of stainless steel mainly comes from chromium. The corrosion resistance of steel will be greatly improved only when the chromium content exceeds 12%, and the addition of nickel will also improve the corrosion resistance. Constant force spring for cable is generally made of stainless steel 301 in China...
Uporaba Power Spring v bencinski črpalki
Uporaba Power Spring v bencinski črpalki
The gas station is a familiar place for everyone. Do you find that the lines of the gas gun are all exposed when passing through the gas station or entering the gas station to refuel? They look messy and unsafe. The car needs to refuel, so you have to go to the gas station to refuel. With the continuous growth of car owners, the passenger flow of gas stations is also increasing. Have you seen the news of the gas station explosion? After a car in a gas station was refueled, due to the negligence of the Refueller, the Refueller did not take out the refuelling gun from the fuel tank port, and the driver of the owner did not check the surrounding conditions of the car, so he started the car. Then the car drove the refueling gun and oil line, pulled down the refueling end connected with it, and caused an explosion. This kind of news is very...
Why is the support important for people to face the display for a long time?
Why is the support important for people to face the display for a long time?
What do you think of the correct sitting posture in office? Relax your shoulders, keep your eyes in front, and keep your eyes balanced at the top of the computer or the top 3 / 1 of the monitor. This is the correct sitting posture of our office. To stand our neck, we need a certain height of the display. The horizontal position of the display is low, and the neck is easy to tilt forward. The cervical spine will obviously feel uncomfortable, very tired, and will cause pressure on the muscles of the neck.      The display bracket is mainly composed of upper support arm, lower support arm, display connector and desktop clamp. The most important core lifting components are in the upper support arm, which supports the display through the deformation of spring or air rod structure in the upper arm. When it comes to the spring in the core lifting part, the reason why the display...
The Key Role Of Motor Brush Spring In Wind-Turbine Design
The Key Role Of Motor Brush Spring In Wind-Turbine Design
Wind-turbines are proven to create reliable and pollution-free energy, and as technology innovates, the cost to develop and manufacturer them is only becoming more affordable. Research demonstrates that to get the most return on turbines, whether onshore or offshore: the bigger the turbine, the better. There are two reasons for this: larger rotors and blades increase the total potential production capacity of the turbine, while higher fixtures and blades are higher in the atmosphere, increasing the power it can actually produce. These two factors are the driving forces behind the efficiency of wind turbines and their ability to create renewable energy. However, in order to achieve this goal, the manufacture of wind turbines requires the use of dozens of parts, components and materials. Motor brush or carbon brush is a small and important part of wind turbine design.  An important part of wind turbine motor brush is motor brush spring. These springs play a key role in the efficient operation of...
Constant force spring responsible for pushing nails in a nail gun
Constant force spring responsible for pushing nails in a nail gun
At present, the nail gun is frequently used in the construction industry or wood industry. The nail gun is a commonly used hand-held tool with a wide variety of types. According to the power source nail gun can be divided into pneumatic and electric two categories. When users are working, they often need to change different tools in their hands. Therefore, in order to facilitate the work, a hook is set up in the nail gun, so that users can hang the nail gun in the waist at work. When using the nail gun, you should pay attention not to face people, because the power of this product is still relatively strong and the risk is relatively high. If you are not careful, you will hurt others, and the consequences are still serious. You should also take protective measures when using it yourself. The driving device of the nail gun uses a constant force spring, because the constant force spring has the characteristic...
double torsion springs suppliers Product
 Storitve montaže in montaže
Storitve montaže in montaže
Podjetje Qianye ne zagotavlja samo proizvodnje natančnih vzmeti, ampak se osredotoča tudi na strukturno zasnovo in funkcionalne rešitve celotnega vzmetnega sistema ter lahko zagotovi celoten sklop sistemske proizvodnje in montaže
 Power Spring
Power Spring
Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...
 Vzmet s spremenljivo silo
Vzmet s spremenljivo silo
Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.
 Vzmet s konstantno silo
Vzmet s konstantno silo
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
 Vzmet karbonske ščetke
Vzmet karbonske ščetke
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Konstantna torzijska vzmet
Konstantna torzijska vzmet
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
double torsion springs suppliers News
 Did you know that only one spring is needed to solve the problem of bicycle parking?
Did you know that only one spring is needed to solve the problem of bicycle parking?

Čas: 2022-9-14

 Nowadays, the quality of life is getting higher and higher. Bicycle no longer exists as a means of transportation, but has become a fashionable fitness product. People who play with cars have a saying: if you want to keep your car, you don't need a car lock. Where do you put your car when you get home? Especially for people like me, who have two children and are very short of room, where to put the bike at home has become a headache.      In order to solve this problem, foreign designers have designed a parking rack, which can easily save you 40% of the use space in one step, and it is very labor-saving. The traditional hanging frame requires you to lift the car hard before you can put it on. As long as you push the hanging frame to the card slot, the hanging rack will rise automatically, and even the elderly can hang the car easily, When you need to ride, just pull your car back and the hook will fall automatically.      Of course, some people will certainly ask that there is a sensor. In fact, it is not so complex. There is a small mechanism inside and a long spring in the wall. Through the tension of the spring, your bicycle can automatically lift and lower. Some people must want to ask that a spring can be so harmful? Today brings you into the world of springs.      Spring is a kind of mechanical part that uses elasticity to work. It can...
 Exposed Power Cord Solutions
Exposed Power Cord Solutions

Čas: 2022-9-14

As people are becoming more and more picky about the beauty of home appliances, the problems of dirt, vulnerability and difficult placement caused by the exposure of power lines have been unsatisfactory. However, with the take-up device, the wires are completely stored in the internal space after use, and these problems are solved. Its core component is the use of winding up. Take-up spring refers to a kind of rotary spring that puts the steel strip crimped once or twice into the fixed box, and then connects it through the middle mandrel to tighten it to the predetermined position. After releasing the preload when necessary, it uses the rebound force of the rolled steel strip to achieve the design purpose.     The utility model has the advantages that the utility model is designed for rotary use, and can be widely used in the circular design device, and forms a coaxial design with the take-up device, which saves space very much. Under the condition of well-designed, its maximum service life can reach 300000 times.     Parameters that must be provided for the design of take-up spring:     1. Inner diameter of installation box (d)     2. Diameter of intermediate mandrel (d)     3. Torque value (T)     4. Application range (NX ~ NY)     5. Service life requirements     6. Torque calculation of products     7. Product life calculation Shenzhen Qianye Precision Metal Co., Ltd. is a leading manufacturer of take-up and spring. It is a manufacturer specializing in providing high-precision spring. It...
 Roloji Pull Bead in akumulatorski roloji
Roloji Pull Bead in akumulatorski roloji

Čas: 2022-9-14

The roller blinds are blackout roller blinds, soft yarn roller blinds, and Shangri-La roller blinds in appearance. They are mainly corded and cordless. Roller shutters have many advantages such as beautiful and simple appearance, firm and durable structure, etc. Roller shutters are suitable for various places, especially for large-area glass curtain walls. When the roller blind fabric is put down, it can soften the indoor light, avoid the trouble of direct sunlight, and achieve a good shading effect. When the roller blind is raised, its volume is very small, so that it is not easy to be detected.        The bead roller blinds use the rope or chain to ascend and descend. The biggest problem of the rope/bead system is that the curtain will not be pulled when it is too big, and the rope will easily break. It is not very convenient to use, and the rope is easy to get dirty. It is very dangerous for children to play with ropes. In developed western countries, the use of beaded roller blinds has been banned and cordless curtains are fully used.        There are many complex components in the spring mechanism control part of many cordless roller blinds on the market, such as: deceleration device, damping device, gear device, limit device, etc. Qianye cancels the traditional complex components, and uses professional spring technology to design, it becomes A spring assembly that can stop at will.        Cordless roller blinds can balance the roller blinds at any position under the action of the spring...
 Application of constant force spring in lifting window
Application of constant force spring in lifting window

Čas: 2022-9-14

The lifting window is different from the traditional internal opening, external opening and ordinary push-pull mode, but adopts the opening mode of lifting up and down. Because it is mainly popular in North America, it is also called American lifting window. It is one of the two major door and window categories in the world. The lifting window is more compact than the left and right lifting windows, which is determined by the structure of the window. The traditional lifting window is a sash frame structure, that is, when the window sash is opened left and right, it is realized by sliding the lower pulley on the sliding rail of the window frame. However, there is a gap between the pulley and the slide rail, and the smoothness of the opening must be taken into account, which will inevitably lead to the decline of the sealing performance. The lifting window is a frame-encased sash structure. The sash is wrapped in the window frame and runs vertically up and down. Through the multiple seals of high-quality siliconized tops, the sash frame is tightly fitted around it, and the sealing performance is significantly better than that of the left and right lifting windows, second only to Fixed and casement windows.       The advantages of the sliding doors and windows are: 1. The characteristics of large ventilation, the lifting windows can be opened by 2/1, and the air entering the room can be convected. The European-style lifting windows and casement windows basically cannot open more than half of the area. Second, there can be different...
 How to solve the problem of fan lifting function by dint spring
How to solve the problem of fan lifting function by dint spring

Čas: 2022-9-13

We all know that gravity of the earth's center will drop rapidly to the bottom point when the object has no support, and it will be heavy when it rises. Similarly, when the fan moves up and down, it will also be affected by gravity. Therefore, we all hope that the fan will be more light when it is lifted and lowered; it can be easily moved up and down by hand to locate at will, and the fan will be more arbitrary when using it. Therefore, to achieve the purpose of light and arbitrary positioning, we must solve the problem of gravity There are several main points for the fan to rise and fall: 1. Life problems: Each kind of hair will have a certain life cycle. If you choose the general materials and immature production technology, the life of the products will be greatly reduced. The same with the elastic problem of hairpin, they are all related to materials and processing technology. In the process of using the fixed force, there will be problems of too short life,. 2. Elasticity: In the limited space, under the same size conditions, in order to make the hair to meet the strength requirements, we must strengthen it from two aspects to better play the effect. (1) Reasonable use of materials: In the process of production and design, we need to use the corresponding materials for processing and production according to the design of the spring. (2) Processing technology There are different processes for the same surface size of the fixed force...
 The customized production process of spring cannot be carried out at will
The customized production process of spring cannot be carried out at will

Čas: 2022-9-14

As we all know, although the spring is only a small elastic accessory, it plays an important role in life, and the quality of the spring has a great impact. Most springs are customized products, so the process of customized production cannot be careless. When purchasing a spring, customers usually need to design the data of the product first, and communicate with the engineer to draw the drawing, so as to communicate with the spring manufacturer more clearly. Drawing the spring drawing is an important step before purchasing the spring accessories, and it is also an important step of customizing the spring engineering. The detail of the drawing directly affects the quality and effect of the spring products. Secondly, customers should carefully screen suppliers. If spring products are used, then spring manufacturers need to carefully screen and select suppliers that are suitable for you through comparison. There are many spring manufacturers on the Internet. It is more important to choose manufacturers with relatively good quality and reputation to cooperate. You can also know whether the selected suppliers are suitable for you through on-site investigation.   Finally, customers should also pay attention to the material comparison of spring accessories. When choosing the spring manufacturer to cooperate in the production of spring accessories, you can conduct technical exchanges with the spring manufacturer, listen to the suggestions of the other party, and combine your actual application to select the spring raw materials suitable for us, whether constant force spring, power spring, variable force spring, motor brush spring, constant torque spring or some special springs, As professional manufacturers...
 Kako doseči, da vzmet s konstantno silo proizvede več sile
Kako doseči, da vzmet s konstantno silo proizvede več sile

Čas: 2022-9-15

A common way to install a constant force spring is to use two or more springs to obtain greater force in a narrow space. This may be necessary if the diameter or width of a single spring exceeds the allocated space, but there is room to add multiple smaller springs. When engaging multiple springs, a much smaller spring design can be used. The total force is the sum of the spring forces.       When combining springs, it is recommended to use the same spring for multiple installation. Compared with using two or more completely different springs to realize the load, this method is more economical and the design will be simpler. Since the force is the sum of the springs, the total force required should be evenly distributed between the number of springs used. We will discuss three different mounting methods for use with multiple springs.         1、 Back to back method The back-to-back method uses two springs that expand in opposite directions and produce a very stable extension. The distance between the springs should be far enough to allow the spring material to bend naturally so that the component will not bind when retracted.         2、 Series method When two or more springs are used, it is also a very common practice to install springs in series. Although this method does not have the stability of the back-to-back method, space availability usually determines the use of this design. 3、 Laminar flow method Laminating springs together is the third option in this series. The term...
 Application products of variable force spring
Application products of variable force spring

Čas: 2022-9-14

   Variable force springs and variable torsion springs can expand negative gradients and positive gradients to form a single spring. It breaks through the influence of the traditional spring affected by Hooke's law, so that the stroke and force are no longer proportionally increased, but accompanied by various elastic force-displacement combinations, such as negative slope. Therefore, a stepped constant force can be achieved. Variable force springs and variable torsion springs can be customized for various elastic curve changes according to specific applications. What products can the curve changes of variable force springs be used for?      Pen Type Drug Syringe Application The spring exerts a constant force to keep the drug flow in place, preventing patient discomfort during use. It has a stretch at the end of the stroke to ensure that all of the medication can be fully injected.      up and down sliding door     When the door is closed, the spring force is less than the door weight; when the door is in the middle stroke, the spring force is equal to the door weight. When fully open, the force applied by the spring is greater than the weight of the door to ensure the door does not slip.      Shelf pusher      The spring outputs a variable force to match the number of displayed items. A large thrust can ensure that a large number of displayed items can be pushed smoothly, and a small thrust can effectively push small-quality items to avoid flattening of the exhibits.      Cordless curtains     Variable torque...