Өй > double torsion springs suppliers
"Constant force spring" is a necessary component for cable accessory manufacturers at home and abroad
"Constant force spring" is a necessary component for cable accessory manufacturers at home and abroad
With the increasing application of cold shrinkable cable accessories, constant force spring has become a necessary component for cable accessories manufacturers at home and abroad. How to find a suitable constant force spring in practical application? How to determine the continuous elasticity, magnetism and corrosion resistance of constant force spring has become the first consideration for cable accessory manufacturers and customers. Whether imported brand or domestic brand, the use of constant force spring for standard cable accessories has become a standard configuration, but the quality is uneven. Faults often occur due to factors such as material, type selection or performance. The corrosion resistance of constant force spring is related to the material and processing technology. The corrosion resistance of stainless steel mainly comes from chromium. The corrosion resistance of steel will be greatly improved only when the chromium content exceeds 12%, and the addition of nickel will also improve the corrosion resistance. Constant force spring for cable is generally made of stainless steel 301 in China...
Application of Power Spring in Gas Station
Application of Power Spring in Gas Station
The gas station is a familiar place for everyone. Do you find that the lines of the gas gun are all exposed when passing through the gas station or entering the gas station to refuel? They look messy and unsafe. The car needs to refuel, so you have to go to the gas station to refuel. With the continuous growth of car owners, the passenger flow of gas stations is also increasing. Have you seen the news of the gas station explosion? After a car in a gas station was refueled, due to the negligence of the Refueller, the Refueller did not take out the refuelling gun from the fuel tank port, and the driver of the owner did not check the surrounding conditions of the car, so he started the car. Then the car drove the refueling gun and oil line, pulled down the refueling end connected with it, and caused an explosion. This kind of news is very...
Why is the support important for people to face the display for a long time?
Why is the support important for people to face the display for a long time?
What do you think of the correct sitting posture in office? Relax your shoulders, keep your eyes in front, and keep your eyes balanced at the top of the computer or the top 3 / 1 of the monitor. This is the correct sitting posture of our office. To stand our neck, we need a certain height of the display. The horizontal position of the display is low, and the neck is easy to tilt forward. The cervical spine will obviously feel uncomfortable, very tired, and will cause pressure on the muscles of the neck.      The display bracket is mainly composed of upper support arm, lower support arm, display connector and desktop clamp. The most important core lifting components are in the upper support arm, which supports the display through the deformation of spring or air rod structure in the upper arm. When it comes to the spring in the core lifting part, the reason why the display...
The Key Role Of Motor Brush Spring In Wind-Turbine Design
The Key Role Of Motor Brush Spring In Wind-Turbine Design
Wind-turbines are proven to create reliable and pollution-free energy, and as technology innovates, the cost to develop and manufacturer them is only becoming more affordable. Research demonstrates that to get the most return on turbines, whether onshore or offshore: the bigger the turbine, the better. There are two reasons for this: larger rotors and blades increase the total potential production capacity of the turbine, while higher fixtures and blades are higher in the atmosphere, increasing the power it can actually produce. These two factors are the driving forces behind the efficiency of wind turbines and their ability to create renewable energy. However, in order to achieve this goal, the manufacture of wind turbines requires the use of dozens of parts, components and materials. Motor brush or carbon brush is a small and important part of wind turbine design.  An important part of wind turbine motor brush is motor brush spring. These springs play a key role in the efficient operation of...
Constant force spring responsible for pushing nails in a nail gun
Constant force spring responsible for pushing nails in a nail gun
At present, the nail gun is frequently used in the construction industry or wood industry. The nail gun is a commonly used hand-held tool with a wide variety of types. According to the power source nail gun can be divided into pneumatic and electric two categories. When users are working, they often need to change different tools in their hands. Therefore, in order to facilitate the work, a hook is set up in the nail gun, so that users can hang the nail gun in the waist at work. When using the nail gun, you should pay attention not to face people, because the power of this product is still relatively strong and the risk is relatively high. If you are not careful, you will hurt others, and the consequences are still serious. You should also take protective measures when using it yourself. The driving device of the nail gun uses a constant force spring, because the constant force spring has the characteristic...
double torsion springs suppliers Product
 Даими борылу чишмәсе
Даими борылу чишмәсе
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
 Ассамблея һәм монтаж хезмәтләре
Ассамблея һәм монтаж хезмәтләре
Qianye компаниясе төгәл чишмәләр җитештерүне тәэмин итеп кенә калмый, бөтен яз системасының структур дизайнына һәм функциональ чишелешләренә игътибар итә, һәм система җитештерү һәм җыюның тулы җыелмасын тәэмин итә ала.
 Оптимизация дизайны хезмәте
Оптимизация дизайны хезмәте
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.
 Forceзгәрешле көч язы
Forceзгәрешле көч язы
Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.
 Карбон щеткасы чишмәсе
Карбон щеткасы чишмәсе
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Даими көч язы
Даими көч язы
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
double torsion springs suppliers News
 Nine factors that should be paid attention to in spring production
Nine factors that should be paid attention to in spring production

Вакыт: 2022-9-14

A spring is a mechanical part that works with elasticity. Generally made of spring steel. It is used to control the movement, buffering or vibration, energy storage, force measurement, etc. of mechanical parts, and is widely used in machines and instruments. (1) Elastic limit - the elastic limit is related to the tensile strength. Selecting a material with a high elastic limit is usually equivalent to selecting a material with a high tensile strength. (2) Spring coefficient - the stress applied to the spring material to produce a unit strain is called the elastic coefficient value, which mainly depends on its chemical composition.    (3) Fatigue strength - fatigue strength must be considered for springs subjected to dynamic loads.   There is a certain relationship between fatigue strength and tensile strength of materials. (4) Hardenability - in order to improve the quenching effect, the material is required to have good hardenability, and at least 50% of the central block iron structure shall be quenched. (5) Shape and size - the mechanical properties of the spring material change with the size. The manufacturing size of the spring material is allowed to have tolerances. Therefore, the material must be selected according to the accuracy of the spring load characteristics.(6) Heat resistance - some springs are used at certain high temperatures. Generally, the mechanical properties of spring materials decrease with the increase of temperature, and the spring performance decreases after a certain temperature.   (7) Corrosion resistance - when the spring is used in a corrosive environment, the corrosion resistance of the material mainly depends on its chemical composition.    There are many corrosion factors, so we...
 Add constant force spring in the mechanical arm to make it more stable
Add constant force spring in the mechanical arm to make it more stable

Вакыт: 2022-9-14

Adjustable mechanical arms are commonly used in offices, laboratories, studios and other locations to support objects at various angles and heights, such as lights, computer screens, laboratory instruments, microphones, etc.   The adjustable manipulator consists of a base member and two connecting rods connected through a pivot joint, which are held in place by friction in the joint. By using spring assisted balancing devices that compensate for most of the weight, the amount of friction required to keep the equipment in place is reduced.   The pivot is a connecting ring that can rotate around an axis set at the pivot point, and a way to attach a spring to the pivot point to reduce the amount of force required. Apply to the arm to place the supported object in the desired position. The auxiliary balance device uses a constant force spring, because the constant force spring provides a smooth range of motion and a constant load in the extension or retraction direction. This can provide smooth motion and force requirements that predict the smallest detail, and the force applied by the constant force spring is more constant over the entire range of motion of the two arms of the device. If coil spring balance is used, a constant force may not be applied to the supported object at all positions of the upper arm part and the lower arm part. For example, at the far end of the range of motion, usually, the force applied to the supported object is insufficient or too large, making it difficult and troublesome to place the...
 Excellent characteristics of Qianye spring
Excellent characteristics of Qianye spring

Вакыт: 2022-9-14

Spring is a kind of mechanical part that uses elasticity to work. The parts made of elastic materials deform under the action of external force, and return to the original state after removing the external force. It is generally made of spring steel, and the types of springs are complex and diverse. Qianye company has strong production strength and a number of senior technicians, who can assist in product design, development and proofing according to your customers' needs, so as to find the best solution for your products to meet your application needs. All kinds of springs produced by the company are at the leading level in the same industry and enjoy high reputation. They have been favored and praised by customers all the time. The excellent features of the product mainly include: (1) Using high-quality raw materials at home and abroad, there is no problem of weak elasticity and poor hardness stability caused by raw materials. (2) The high-precision slitting machine has high precision and stable quality, and there is no problem of large deviation of material width and size. (3) The high-precision edging machine has no burrs around. There is no need to worry about hurting the operator and supporting products during installation and use. (4) The self-developed stretch forming process (invention patent has been obtained) and forming equipment are self-developed and manufactured by our company, and the produced spring greatly increases the service life of the spring. (5) High temperature heat treatment has uniform surface color, stable tensile strength and strong fatigue resistance. (6) After 24-hour pressure test, the quality is guaranteed. (7) In terms of price, the factory...
 Highгары төгәл язның дизайн технологиясе
Highгары төгәл язның дизайн технологиясе

Вакыт: 2022-9-14

 Spring to ensure good elastic performance, that is, absorb a lot of elastic energy without plastic deformation; Sufficient plasticity and toughness to prevent impact fracture. According to the stress nature, the spring can be divided into tension spring, compression spring, torsion spring and bending spring. According to the shape, it can be divided into dish spring, ring spring, plate spring, spiral spring and truncated cone scroll spring.       The design process of spring has the following points:      1. Device space: design a compression spring, clearly understand the space required to install the spring, and then you can master the basic manufacturing conditions, outer diameter, inner diameter and free length of a compression spring.      2. Movable stroke load: the design of compression spring to clearly understand the position to be actuated and the elastic force to be carried. Determine the position and know the required elasticity, then you can determine the material, wire diameter and number of turns.    3. Environmental factors: when the spring is actuated in different environments, it will be affected by environmental factors and affect the service life. Therefore, the designer takes into account the changes of ambient temperature and humidity. The temperature has a great impact on the service life of the spring, and the humidity is easy to oxidize the spring without surface treatment. Therefore, environmental factors can determine whether the spring needs surface treatment and material selection.      4. Distance space between two ends: stretching the points at both ends of the spring will affect the form of the hook and...
 Фанат күтәрү функциясе проблемасын чишмә чишмәсе белән ничек чишәргә
Фанат күтәрү функциясе проблемасын чишмә чишмәсе белән ничек чишәргә

Time:2022-9-13

We all know that gravity of the earth's center will drop rapidly to the bottom point when the object has no support, and it will be heavy when it rises. Similarly, when the fan moves up and down, it will also be affected by gravity. Therefore, we all hope that the fan will be more light when it is lifted and lowered; it can be easily moved up and down by hand to locate at will, and the fan will be more arbitrary when using it. Therefore, to achieve the purpose of light and arbitrary positioning, we must solve the problem of gravity There are several main points for the fan to rise and fall: 1. Life problems: Each kind of hair will have a certain life cycle. If you choose the general materials and immature production technology, the life of the products will be greatly reduced. The same with the elastic problem of hairpin, they are all related to materials and processing technology. In the process of using the fixed force, there will be problems of too short life,. 2. Elasticity: In the limited space, under the same size conditions, in order to make the hair to meet the strength requirements, we must strengthen it from two aspects to better play the effect. (1) Reasonable use of materials: In the process of production and design, we need to use the corresponding materials for processing and production according to the design of the spring. (2) Processing technology There are different processes for the same surface size of the fixed force...
 Көч чишмәсе люстраның ирекле күтәрелүен һәм төшүен аңлый ала
Көч чишмәсе люстраның ирекле күтәрелүен һәм төшүен аңлый ала

Вакыт: 2022-9-14

Chandelier is a common lighting fixture, which is widely used in offices, exhibition halls, living rooms, restaurants and other places. It is very popular because of its beauty. But now common chandeliers are generally installed with fixed hanging height. If you want to adjust the hanging height of the lamp, you can only adjust it manually. The adjustment process is complex. Therefore, a chandelier with simple structure and convenient installation that can automatically adjust the hanging wire has emerged. The chandelier that can automatically adjust the hanging wire realizes that the height can be adjusted only by lifting the lamp body up or pulling it down. When the lamp body is at the hanging height position, the hanging wire can automatically adjust the retractable length of the hanging wire through the adjuster. The hanging height of the lamp can be adjusted by adjusting the lamp body.    A chandelier that can automatically adjust the hanging wire, including the hanging wire, the hanging wire automatic adjuster, the lamp body, and the ceiling box. The lamp body includes an LED light source and a driving power supply; the automatic suspension wire adjuster is built into the ceiling plate, one end of the suspension wire is stored in the wire receiving groove of the automatic suspension wire adjuster, and the other end is removed from the ceiling box cover. The wire trough leads out through holes and is connected and fixed with the lamp body; the suspension height position of the lamp body of the chandelier is the suspension height position maintained by...
 Автомобиль куркынычсызлыгы каешында кулланылган электр чишмәсе
Автомобиль куркынычсызлыгы каешында кулланылган электр чишмәсе

Вакыт: 2022-9-14

Safety belt is equal to life belt. Everyone should see the painful accidents caused by not wearing safety belt. I believe everyone is familiar with the car safety belt. It is a safety device to avoid rushing out of the car during collision and causing death and injury. Automobile safety belt is recognized as the cheapest and most effective safety device, and it is also a necessary safety configuration. In a typical safety belt system, the safety belt is connected with a retractor. The core component of the retractor is the reel, which is connected with one end of the safety belt. Inside the retractor, with the help of the action of the power spring, the webbing can expand and contract freely with the movement of the user's body without loosening the webbing. In case of emergency braking, collision or sharp change of vehicle driving state, the sensitive element in the retractor will lock the reel to fix the webbing at a certain position and bear the load imposed on the webbing by the user's body. The power spring is made of rolled steel strip. A spring box is required to limit its outer diameter in use. The center of the spring is connected with the shaft. When an external force is applied to make the shaft rotate relative to the spring, the spring will roll on the shaft center and store torque. When the external force disappears, the spring will produce torque on the shaft or spring box. Qianye has made technical product updates for power springs. First of all, our company...
 Автомобиль күлендә даими көч язы
Автомобиль күлендә даими көч язы

Вакыт: 2022-9-14

If the plush toys in the car are the favorite of female car owners, it is believed that the favorite of male car owners is the vehicle ashtray. Car ashtrays are indispensable car supplies for smokers. Although the vehicle ashtray is specially designed for smokers' car owners, it can also be used to place sundries for non-smoking car owners, which is very practical. When it comes to car ashtrays, I have to mention the problem of smoking in the car. In fact, smoking in the car is more dangerous than smoking outside. After all, the space in the car is limited, and the air circulation range is small. In this case, smoking will certainly cause air pollution in the car.      However, at present, the utilization rate of ashtrays on many models is not very high. Most smokers' car owners pop ashtrays out of the window directly. The function of on-board pop-up ashtrays can greatly improve this situation. Now many cars have ashtrays designed under the central control and in the rear row to facilitate smokers in the car. In addition, some luxury cars also have ashtrays designed under the door handle. Most of the vehicle ashtray structures are in the shape of cylindrical cups, and the sealing performance is also relatively good. Generally, cigarette butts are thrown in. Basically, there is no smoke smell floating out, and the sealing is more humanized. Pop up ashtray riders may worry about whether the car will be a little bumpy, and the ashtray will pop up automatically. The ashtray will fly everywhere,...