
ونڈ ٹربائن سلپ رنگ برش ہولڈر میں کاربن برش اسپرنگ کا اطلاق
In order to prevent accidents caused by excessive wear of the carbon brushes on the collector device of the slip ring brush holder of the wind turbine, a normally closed switch-type alarm unit is configured for each carbon brush, and these alarm units are connected in series to the alarm. In the prior art, the grounding brush is held on the structure using a coil spring pressure finger lever structure. In order to ensure sufficient pressure after the carbon brush is worn, the initial pressure of the spring has to be increased, which aggravates the wear of the carbon brush. However, in the later stage of carbon brush wear, the tension of the coil spring becomes insufficient again, resulting in poor contact between the carbon brush and the slip ring, frequent beating, resulting in breakage; at the same time, from the carbon brush to the alarm unit, the intermediate link is complex and easy to Lead to false alarm or no alarm, reducing the...