Hjem > Electric Fan Lifting Spring
Application of constant torque spring in wireless radio
Application of constant torque spring in wireless radio
With the increasing attention of human beings to environmental issues in the process of social progress, green and low-carbon has become a popular new trend, and energy-saving and environmental protection technologies and products continue to emerge, which are affecting and changing our lives. Hand power generation is a green way of energy supply. The generator powered by the radio contains a constant torque spring motor. When tightening the spring, the spring is gradually wound onto the larger drum, and the mechanical energy obtained during winding is converted into potential energy and stored in the spring. When the spring is released, the stored energy passes through the gear transmission device and the rotating motor to generate output voltage, which is then adjusted by the zener diode to supply power to the radio in the form of a plug.   Constant torque spring motor is a prestressed spring material belt, which forms a coil and is stored on a small storage drum. Then fix the...
Qianye Precision Cordless Blind Spring
Qianye Precision Cordless Blind Spring
 Imagine, on the weekend of a busy work week, unloading from work, taking a hot bath, having a leisurely dinner, and when it's time to rest, draw the curtains to isolate the noisy world outside, and then, beautiful and beautiful Sleeping until you wake up naturally, this is not the most important thing for every office worker.   However, for families with children, curtains have increasingly become a new safety hazard, especially for families with roller shutters. The pull rope of the roller blind is usually closed at the bottom or the side. If it is not fixed, the rope will slide down to form a loop, which is easy to wrap around the neck of the child, causing the child to suffocate, and even lead to death in severe cases. It is reported that there are many cases of suffocation and death of children due to rope entanglement accidents every year, mostly children under the age of 4. The...
Anvendelse af kraftfjeder i abdominal sundhed hjul
Anvendelse af kraftfjeder i abdominal sundhed hjul
Abdominal health wheel is a small pusher that can exercise muscles, joints and reduce weight. The material is generally high-quality engineering plastic, with simple design, beautiful appearance, firmness and durability, and easy to use. It is used to exercise the fat of abdomen, waist, hip, arm and other parts of the body. Due to the simple site required for exercise, it is convenient for home use. The abdominal health wheel with power springs can make people easily complete the recovery movement under the retraction elastic force of the power springs when people use it for exercise and when the body is straightened. As we all know, the characteristic of the power springs are made of steel strip. In use, a spring box is required to limit its outer diameter. The center of the spring is connected with the shaft. When an external force is applied to make the shaft rotate relative to the spring, the spring will roll on the shaft center and store the torque....
Motor brush spring and wind turbine maintenance
Motor brush spring and wind turbine maintenance
Research shows that to get the greatest return from turbines, whether onshore or offshore, the bigger the turbine, the better. Wind turbines have proven to produce reliable and pollution-free energy, and as technology innovates, the cost of developing and manufacturing them will only become more affordable.  Motor Brush Materials and Wind Turbine Maintenance     Motor brushes are consumables, which means there is significant wear and tear over time and will need to be replaced. While proper wind turbine operation and maintenance requires moderate wear, excessive wear can create carbon dust in the slip ring cabinet, reducing internal isolation.      Also, a useful tip to keep in mind is that motor brushes that are evenly worn indicate good performance. Since reliability is critical in wind applications that generate electricity for industrial tasks and homes, businesses and schools, it is important to work closely with your engineers and parts manufacturers to determine the best motor brush materials. Two common options include:...
Did you know that only one spring is needed to solve the problem of bicycle parking?
Did you know that only one spring is needed to solve the problem of bicycle parking?
 Nowadays, the quality of life is getting higher and higher. Bicycle no longer exists as a means of transportation, but has become a fashionable fitness product. People who play with cars have a saying: if you want to keep your car, you don't need a car lock. Where do you put your car when you get home? Especially for people like me, who have two children and are very short of room, where to put the bike at home has become a headache.      In order to solve this problem, foreign designers have designed a parking rack, which can easily save you 40% of the use space in one step, and it is very labor-saving. The traditional hanging frame requires you to lift the car hard before you can put it on. As long as you push the hanging frame to the card slot, the hanging rack will rise automatically, and even the elderly can hang the car easily,...
Power spring used in automobile safety belt
Power spring used in automobile safety belt
Safety belt is equal to life belt. Everyone should see the painful accidents caused by not wearing safety belt. I believe everyone is familiar with the car safety belt. It is a safety device to avoid rushing out of the car during collision and causing death and injury. Automobile safety belt is recognized as the cheapest and most effective safety device, and it is also a necessary safety configuration. In a typical safety belt system, the safety belt is connected with a retractor. The core component of the retractor is the reel, which is connected with one end of the safety belt. Inside the retractor, with the help of the action of the power spring, the webbing can expand and contract freely with the movement of the user's body without loosening the webbing. In case of emergency braking, collision or sharp change of vehicle driving state, the sensitive element in the retractor will lock the reel to fix the webbing...
Spring applied to the skin stapler
Spring applied to the skin stapler
In the process of skin incision suture in surgery, chest surgery, abdominal surgery and skin grafting in the burn department, manual suture was generally used in the past, but now skin stapler is generally used. The appearance of skin stapler can be regarded as a reform of traditional suture methods and an important reform of modern suture technology, which has given surgeons a good help. In clinical medicine, skin stapler is also listed as one of the medical products worth promoting. Compared with traditional suture surgery, the stapler can be used at a very fast speed, which can greatly reduce the operation time, easy operation and reduce the labor intensity of the medical staff, because the medical staff themselves are a busy group. The stapling eye of the skin stapler is close and orderly, painless nail removal and beautiful appearance. There are few side effects and surgical complications, so the skin stapler is very popular in the market and medical...
The power spring makes the tape measure shrink freely
The power spring makes the tape measure shrink freely
Tape measure, I believe everyone is familiar with it. Tape measure is a common measuring tool in our daily life and work. After the tape measure is pulled out, it can be rolled up because there is a power spring in the tape measure. When pulling out to measure the length, it actually lengthens the length of the scale and spring. Once the measurement is completed, the spring in the tape measure will automatically shrink, and the tape will also shrink under the action of spring force, so the tape measure will roll up. The power spring is an elastic fitting in the tape measure. The end of the steel bar scale is connected to the front end of the spring, and the end of the spring is fixed in the middle of the tape measure. The tape measure mainly uses the energy storage characteristics of the spring, which can be said to be the conservation of mechanical energy .When you pull the tape...
Electric Fan Lifting Spring Product
 Konstant torsionsfjeder
Konstant torsionsfjeder
Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...
 Montering og monteringsydelser
Montering og monteringsydelser
Qianye Company leverer ikke kun produktion af præcisionsfjedre, men fokuserer også på det strukturelle design og funktionelle løsninger af hele fjedersystemet og kan levere et komplet sæt af systemproduktion og montering
 Fjeder med variabel kraft
Fjeder med variabel kraft
Characteristic: The appearance of variable force spring and variable torsion spring is very similar to constant force spring and constant torsion spring. Variable force springs and variable torsion springs can break through the influence of Hooke’s law on traditional springs, so that stroke and force no longer increase proportionally, but can achieve various elastic force-displacement combinations such as negative slope stepped constant force, which can be mechanically For engineering requirements, use the relationship between elastic force and displacement stroke to design various elastic curve changes in specific applications. There are a variety of different variable force springs, variable torsion spring application designs, and solutions. The manufacturing range of variable force springs and variable torsion springs: The thickness is 0.05~0.85mm, and the width is 2.0~65mm.
 Optimeringsdesignservice
Optimeringsdesignservice
From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.
 Kulbørstefjeder
Kulbørstefjeder
Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...
 Fjeder med konstant kraft
Fjeder med konstant kraft
Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...
Electric Fan Lifting Spring News
 Traditionelle kraftfjedre og forspændte fjedre
Traditionelle kraftfjedre og forspændte fjedre

Tid: 2022-9-14

   Traditional power springs and preloaded power springs are fabricated from spring steel bars to provide torque. Spring steel is a low alloy, medium carbon steel or high carbon steel with a very high yield strength. Objects made of spring steel can return to their original shape despite significant bending or twisting. Power springs use flat (unstressed) steel windings, while pre-stressed power springs use pre-stressed steel to produce a larger range of usable torque than conventional power springs.        During the manufacturing process, the spring is wound into the retaining ring or the customer's housing (the retaining ring is pictured below). When ready for final installation, carefully install the spring into its housing with the outer end attached to the outer edge and the inner end attached to the mandrel (see photo below). During operation, the housing or mandrel will be fixed while the other component is free to rotate. Depending on the requirements of your specific design, it may be beneficial to use a fixed mandrel/free box or free box/fixed mandrel arrangement.        These springs are typically used to retract the cord or cable of the spool. You might see it in lawn mowers, retractable lanyards, or dog leashes. This is also the type of spring used to drive many mechanical clocks and timers, which is why they are sometimes called "clock springs". The load provided by the spring increases with the cross-sectional area of ​​the material. The number of turns the spring can provide depends on the space available between the mandrel and the...
 The QY spring mechanism of manual cordless blinds is very different from ordinary wire springs
The QY spring mechanism of manual cordless blinds is very different from ordinary wire springs

Time:2023-3-6

The QY spring mechanism of manual cordless blinds is very different from ordinary wire springs, and its core component is the need for a spring with negative gradient. Cordless blinds are usually designed to encounter the problem that when the blinds is pulled to the top it will sag and when it is pulled to the bottom it will return to a certain height of the spring. The main purpose of Qianye Precision is to provide a control system for cordless curtains to hover freely, so that the lifting and lowering of the cordless curtains can stop at any position desired by the user. At the same time, there will not be a situation where the internal elastic element is fatigued and cannot be kept fully open. More info:https://qyspring.net/ E-mail: cici_cao@qianyejm.com Whatsapp: +86-183 7490 5808
 Constant force spring is used in removing an implanted object using laser cut hypotubes
Constant force spring is used in removing an implanted object using laser cut hypotubes

Tid: 2022-9-14

Removal or extraction of the lead may be difficult. As mentioned above, the body's natural healing process forms scar tissue over and along the lead, and possibly at its tip, thereby encasing at least a portion of the lead and fastening it even more securely in the patient's body. In addition, the lead and/or tissue may become attached to the vasculature wall. Both results may, therefore, increase the difficulty of removing the leads from the patient's vasculature. A device for removing an implanted object from a body vessel, may comprise a sheath assembly comprising an outer sheath assembly and an inner sheath assembly, and a pin, the outer sheath assembly comprising an outer sheath and an outer band, the outer band coupled to the pin, the inner sheath assembly comprising an inner sheath and a tip, wherein the tip has a cutting surface, the inner sheath comprising a proximal end and a distal end, wherein the distal end of the inner sheath is coupled to the tip, the tip comprising a cam slot for receipt of and cooperation with the pin, and a handle assembly comprising a trigger and a barrel cam cylinder, the trigger comprising a trigger pin, the barrel cam cylinder comprising a barrel cam cylinder slot for receipt and cooperation with the trigger pin, wherein the proximal end of the inner sheath is coupled to the barrel cam cylinder such that upon the trigger pin moving proximally in a longitudinal direction, the barrel cam cylinder rotates in both a clockwise direction and a counter clockwise direction, thereby...
 Nine factors that should be paid attention to in spring production
Nine factors that should be paid attention to in spring production

Tid: 2022-9-14

A spring is a mechanical part that works with elasticity. Generally made of spring steel. It is used to control the movement, buffering or vibration, energy storage, force measurement, etc. of mechanical parts, and is widely used in machines and instruments. (1) Elastic limit - the elastic limit is related to the tensile strength. Selecting a material with a high elastic limit is usually equivalent to selecting a material with a high tensile strength. (2) Spring coefficient - the stress applied to the spring material to produce a unit strain is called the elastic coefficient value, which mainly depends on its chemical composition.    (3) Fatigue strength - fatigue strength must be considered for springs subjected to dynamic loads.   There is a certain relationship between fatigue strength and tensile strength of materials. (4) Hardenability - in order to improve the quenching effect, the material is required to have good hardenability, and at least 50% of the central block iron structure shall be quenched. (5) Shape and size - the mechanical properties of the spring material change with the size. The manufacturing size of the spring material is allowed to have tolerances. Therefore, the material must be selected according to the accuracy of the spring load characteristics.(6) Heat resistance - some springs are used at certain high temperatures. Generally, the mechanical properties of spring materials decrease with the increase of temperature, and the spring performance decreases after a certain temperature.   (7) Corrosion resistance - when the spring is used in a corrosive environment, the corrosion resistance of the material mainly depends on its chemical composition.    There are many corrosion factors, so we...
 Power spring in the design of the car covers
Power spring in the design of the car covers

Tid: 2022-9-14

Car covers are commonly used automotive protective articles, but the folding and storage of car covers is a troublesome thing. In order to solve this problem, invention lovers have done a lot of useful exploration and put forward many solutions. One kind of scheme is to use power to drive the reel to directly roll up the car cover cloth. Using the reel to directly roll up the car cover cloth can achieve the purpose of rapid retraction of the car cover, but there are the following problems in actual use: first, the winding and friction of the reel when directly rolling up the car cover cloth wear the car cover cloth greatly; second, in order to adapt to the width of the car cover cloth, the width of the car cover retracting device must be close to the width of the car cover cloth. If it is too narrow, it will increase the winding of the car cover cloth, so the shape of the car cover retracting device is larger, It reduces the convenience of use: Third, it may not be able to completely stow the hood cloth. Only one power spring is needed to solve the above series of problems. The power spring designed by Qianye precision can be applied to the car cover. The power spring retracts the car cover to realize the rapid retraction of the car cover. At the same time, it solves the problems of large wear, large device shape and high operation intensity caused by the direct retraction of the car cover cloth by the reel, as well as the problem...
 Fjedermotor med konstant moment
Fjedermotor med konstant moment

Tid: 2022-9-14

A constant torque spring motor is a strip of prestressed spring material that forms a coil and is stored on a small storage drum. The free end is then pinned and rewound onto the larger output drum; this is the "winding" part of the constant torque spring cycle. When the output drum is released, the spring will return to the storage drum to assume its natural curvature, rotating the output drum and providing an almost constant torque.        Constant torque springs are made of type 301 high quality stainless steel and are supplied in coil form for mounting on the motor drum. Its main features are: 1. Long time deflection under almost constant torque. Positive or limited negative gradients can be achieved. 2. Minimal inter-coil friction and resulting hysteresis, which is common in power springs. 3. Rotary motion is provided directly from the output drum or linear displacement by using cables and spools.        Many applications utilize constant torque spring motors, such as: cord retractors, balance retrieval and return applications, drive motors, cordless curtains, and more. The spring features a high turn design, making it ideal for balancing applications. When they are fully turned, the springs apply a constant torque. You can also guarantee high torque levels. This is due to their compactness and high efficiency.        The function of the constant torque spring motor depends on the design. The size of the spring can vary. Therefore, they make them suitable for use in a variety of applications. We strongly recommend that you consult...
 Application of power spring in draw-wire encoder
Application of power spring in draw-wire encoder

Tid: 2022-9-14

A draw-wire encoder, also known as a string potentiometer, pull wire position sensor, cable extension displacement sensor, or yo-yo potentiometer. It is a cable driven position or displacement sensor for linear position measurement and velocity using a flexible cable (wire) and a spring loaded spool.   The string pot or cable extension sensor is composed of four main components in the shell: 1. High strength stainless steel cable (rope or steel wire rope); 2. Equal diameter spool (drum); 3. Power spring with high torque and long service life; 4. Rotary potential precision sensor.   In the shell of the sensor, a soft high-strength stainless steel cable is tightly wound on a precision machined cylindrical drum (or spool) with constant diameter, which rotates with the winding and unfolding of the measuring cable. In order to maintain the tension and retraction of the steel wire, the spring is connected to the drum. Then connect the spool to the shaft of the rotary potential precision sensor (or encoder). When the sensor string extends linearly with the moving object, it will cause the roller and sensor shaft to rotate.   For displacement or position measurement, the main body of the sensor is installed on the fixed surface, and the end of the flexible cable is connected to the moving object. When the object changes its position, the cable unfolds and reels and the rotating spool drive the shaft of the sensing device, generating an electrical signal proportional to the linear extension or displacement of the cable. For speed measurement, a tachometer is required. The power spring is mainly used in the equipment of...
 Kraftfjedre anvendt i vægtløftningsbeskyttelsesanordninger
Kraftfjedre anvendt i vægtløftningsbeskyttelsesanordninger

Tid: 2022-9-14

 Barbell is a kind of core training sports training equipment, which is also used in weight lifting. Barbell sports is a kind of weight training. Barbell training equipment can be used to improve muscle strength training, and barbell can also be used for core training to promote overall coordination. The barbell is heavier than other fitness equipment, which is also prone to accidents. The existing barbell lacks corresponding protective measures when used, which is easy to hurt users or damage the barbell. The above problems can be solved by the power spring. Add the barbell weight lifting protection device of the power spring. The utility model relates to the technical field of fitness equipment, including a base plate, and also includes: a placing table connected with the base plate; Barbell, butting with the placing table; One end of the protection mechanism is connected with the placing table, and the other end is connected with the barbell. The protection mechanism comprises an inductor, a linkage component and a clamping component; The holding mechanism is connected with the barbell. Athletes hold the barbell through the holding mechanism to exercise, and the barbell drives the linkage component to move. When the human body is released, the barbell drives the linkage component to move quickly under its own gravity. When the sensor senses that the linkage component moves faster, the sensor starts the operation of the clamping component, and the clamping component clamps the linkage component, hinders the movement of the linkage component, and then hinders the movement of the barbell, so as to protect the...