Window spiral spring

Hjem > Window spiral spring

How to determine the length of a constant force spring: Constant force springs are mechanical devices used in applications that typically require some kind of balance or retraction mechanism. In design and function, constant force springs differ from the more common types of coil springs. They apply a consistent linear force or torque that remains constant over a wide range of motion. When a coil spring is under force, whether it is stretched, compressed, or rotated, it produces a force proportional to its stretch. How a spring responds when a force is applied or released is called spring deflection. Years of experience tell us what happens when a spring is released from its temporary state. We know that the spring will return to its original position, but it will be proportional to the force exerted on it before releasing. A spring has a restoring force that allows the elastic material to return to its original state - the equilibrium position after the applied force is removed. Stretching, squeezing or twisting, what...

Constant Force Springs Design Guide: There are many mechanical components to choose from for your device or application. If your device requires a spring, consider constant force springs. These are a type of extension spring. They do not obey Hooke’s law, so their force remains constant, even when deflected. Because of their flat force curve, constant force springs are suitable for applications that require a smooth range of motion and a constant load. Learn more about this type of spring to see if it could work in your device or application. Constant Force Spring Benefits There are many benefits of constant force springs that make them suitable for a number of applications: Have small space requirements Provide a smooth range of motion Have no inertia to overcome Mount to existing hardware Produce a counterbalance effect For these reasons, constant force springs are versatile enough to work for a number of applications in which a constant load is required to counterbalance, tension, retract or dispense. This is why they’re frequently used to enhance...

Design of constant force springs: A constant force spring is a spring that exerts a constant force over its range of motion. That is, it does not obey Hooke's law. Typically, a constant force spring is constructed as a coiled band of spring steel so that the spring relaxes when fully coiled. When it is unrolled, the restoring force comes mainly from the portion of the belt that is close to the roll. Since the geometry of this region remains nearly constant as the spring unfolds, the resultant force is nearly constant. By creating a spring with a variable pitch, you can make a push-shape spring with a constant velocity. Placing a larger pitch in a larger outer diameter coil and a smaller pitch in a smaller outer diameter coil will force the single spring to fold all coils at the same rate when compressed. Design of Constant Force Springs: A constant force spring is a coil of prestressed...

Anvendelse af fjedre med variabel kraft i detaildisplays: Variable force springs are very common in the point-of-purchase or POP industry, especially in shelf pushers. Variable force springs provide variable force to precisely match increasing or decreasing force requirements, propelling the product horizontally forward. Due to their wide applicability, these springs can be seen in the tobacco, cosmetic, electronics and medical industries. So why use variable force springs in shelf thrusters? 1. Inventory Control Variable force springs are commonly used in trays that push products forward in a controlled manner. Variable-force springs in the push-in trays aid product fronts, so the shelves are always well-stocked. These trays allow for more organized store inventory and help track inventory needs. This is even more critical in today's COVID-conscious environment. 2. Product Integrity Variable force springs are designed around the weight of the product they push. This ensures that the product is never slammed or damaged when it is...

Advantages of Qianye Cordless Spring Components: All curtain cords, whether installed on the side, caught in curtains, or placed on the back, can be dangerous to children. It is best to replace all corded curtains with cordless curtains in houses where children live or visit, especially in children's bedrooms and play areas. Cordless roller blinds with either a spring system or an electric system can improve the safety of the home. Cordless roller blinds with spring system are similar to movie curtains. They use the elasticity of the springs. Under the action of the spring components, the roller blinds can be balanced at any position and can be stopped at any time. At present, most of the spring components on the market are wire spring cordless curtain systems, which have a relatively short service life and a high degree of force attenuation. When pulling down, the curtain stops at each clip, and when rising, pulling down makes the curtain bounce...

Træk perlerullegardiner og akku-rullegardiner: The roller blinds are blackout roller blinds, soft yarn roller blinds, and Shangri-La roller blinds in appearance. They are mainly corded and cordless. Roller shutters have many advantages such as beautiful and simple appearance, firm and durable structure, etc. Roller shutters are suitable for various places, especially for large-area glass curtain walls. When the roller blind fabric is put down, it can soften the indoor light, avoid the trouble of direct sunlight, and achieve a good shading effect. When the roller blind is raised, its volume is very small, so that it is not easy to be detected. The bead roller blinds use the rope or chain to ascend and descend. The biggest problem of the rope/bead system is that the curtain will not be pulled when it is too big, and the rope will easily break. It is not very convenient to use, and the rope is easy to get dirty. It is very dangerous for...

Application of variable force spring in time-delayed shelf: Supermarkets and convenience stores can be seen everywhere. Now more and more people are developing retail. Traditionally, products on shelves are usually placed in order. Some merchants install automatic propellers. After customers buy products, the propellers will push The products at the back are automatically advanced, and when the customer wants to find this product, it is easier to see, which is convenient for the customer to find the desired product and stimulates the customer's desire to buy. Theft of small items in retail stores is a problem that occurs. An ideal form of anti-theft is to create time delays between the dispensing of multiple products. If there is a considerable delay between the distribution of individual products, thieves are less likely to steal the products. A shelf-delayed pusher equipped with variable force springs can eliminate this problem. The propulsion system includes a pusher, a track and a stop mechanism. The propulsion system includes a resistance mechanism...

Constant force springs applied in wall mounted accessories: As more and more people spend more and more time using computers, computer users spend more time sitting or standing at their desks or workstations in front of devices. Keeping what experts call "the best ergonomic positioning" can improve energy levels and overall comfort. For this purpose, the input and output devices must be placed in appropriate positions. The proper position can reduce the muscle strain of the user's arm and effectively prevent various musculoskeletal diseases, including carpal tunnel syndrome, neck pain, and upper and lower back pain. The attachment bracket can be used to facilitate the support and position adjustment of the fixed attachment. The attachment retainer allows simple three-dimensional adjustment of two such devices to place the devices in a more ergonomic relative position to meet the needs of various users and workspaces, and has a balancing mechanism for balancing the weight of fixed attachments. The balance mechanism provided by the wall mounted accessories is superior to the traditional lifting system,...

Window spiral spring Product

Fjeder med konstant kraft: Characteristic: Constant force (constant force) springs are rolled by stainless steel strips. The high-strength steel strips are shaped by specific production spring equipment. When the external force straightens them, the spring will naturally wind back and produce elasticity, but it reaches us The goal can return to the starting point we specified after being shifted. Advantage: The advantages of constant force spring over traditional wire spring: 1. In a very small installation space, a very high elastic output can be achieved. 2. Maintain a constant elasticity in all strokes. 3. The pre-stroke stroke is short, and only a short stroke is needed to achieve the required elasticity. 4. The original length is less than the wire spring, and the stroke is unlimited. The manufacturing range of Dingli Clockwork: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The constant force spring has the characteristic of maintaining a constant force during a long stroke, and can achieve...

Optimeringsdesignservice: From product ideas, design to finished product manufacturing, we can assist customers in completing them, and help customers optimize their products from the professional perspective of spring use, speed up product development, and speed up time to market. From the initial stage of spring component design, production to final assembly, customers choose the advantages that Qianye can get. 1. Save product development time 2. Give you a variety of solutions, choose the desired optimization solution 3. The spring that best suits your product 4. Serve you for life and satisfy any technical support you have.

Montering og monteringsydelser: Qianye Company leverer ikke kun produktion af præcisionsfjedre, men fokuserer også på det strukturelle design og funktionelle løsninger af hele fjedersystemet og kan levere et komplet sæt af systemproduktion og montering

Kulbørstefjeder: Characteristic: 1. Due to the constant force, regardless of the length of the carbon brush and the commutator, the pressure remains the same. 2. Constant force spring reduces carbon brush loss, prolongs the life of carbon brush, and reduces current loss. To 3. Small motors can be designed to reduce the outer diameter of the motor. 4. The length of carbon brush can be increased. To 5. A larger commutator can be used. To 6. Reduce sparks and reduce electromagnetic interference. Constant force spring for single roll carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be smaller than the carbon brush height 3. Length of abradable carbon brush: The spring stroke must be greater than the length of the abradable carbon brush 4. Contact pressure required for carbon brush and commutator: required spring force Constant force spring for double-rolled carbon brush 1. Carbon brush width 2. Carbon brush height: The spring width must be...

Kraftfjeder: Characteristic: The power spring is coiled by steel strip. A spring box is required to limit its outer diameter. The center of the spring is connected to the shaft. When an external force is applied to make the shaft and the spring rotate relative to each other, the spring will be wound on the shaft and stored Torsion, when the external force disappears, the spring generates torsion on the shaft or spring box. Advantage: Power springs are divided into natural power springs and pre-stressed power springs according to their relaxed shape. In contrast, the pre-force type power spring can store 25% to 55% more torque and provide more effective turns. Product manufacturing range: The thickness is 0.05~0.85mm, and the width is 2.0~60mm. Principle of the scene: The high-precision pen injector uses a unique power spring to provide small and highly accurate drug dosages. A fixed amount of medicine is injected into the body through the constant force of the spring...

Konstant torsionsfjeder: Characteristic: The fixed (constant) torque spring (spring) is made of stainless steel. The external force rewinds the mainspring from its natural state to the output wheel (energy storage). When the external force is removed, the spring will return to its natural state. At the same time, a constant torque force (stored elastic force) is generated (released) on the output wheel, so it is called a constant torque generator. strip. Belongs to (a use method in constant force spring) Advantage: The advantages of fixed-torque springs compared to power (scroll) springs: 1. The torque will not change due to the increase in the number of revolutions. To 2. There is no limit to the number of available turns, and the design of multi-turn turns mostly adopts a fixed-torque spring. To 3. The number of invalid rotations is small, more energy can be stored, and the efficiency is higher. To Manufacturing range of fixed torque spring: The thickness is 0.05~0.85mm, and the width...

Window spiral spring News

[Qianye precision]Spring on motor car curtain: When taking the high-speed railway, everyone should like to look at the scenery outside the window. I don't know if you have paid attention to the curtains on the bullet train. When I take the bullet train, I often find that there is no buckle on the curtain slide rail on the bullet train, but I can still go up and down freely and won't fall or bounce back. That is to say, when I pull down 1 / 3, it will stop at 1 / 3, and when I pull down half, it will stop at half; If you want to put it away, just push it up and stop where you push it? It's different from the curtains I usually see at home. Isn't it affected by gravity? With this curiosity, let me show you that the bullet train should be a spring roller shutter. The elasticity of the spring roller shutter can adjust the rise and fall of the fabric within a certain range and can stop at any position. Gently pull down and let go. The fabric can bounce back to the top of the curtain leisurely and freely. The operation is light, the operation time is short, and the stay position is arbitrary. Compact structure, flexible and convenient operation. Because the addition of variable force spring makes the roller shutter achieve this effect, many variable force springs on the market can not achieve the effect that the force is changing in any section, so many electric roller blinds will add some components (deceleration device, damping device, this...

Anvendelse af fjedre med variabel kraft i detaildisplays: Variable force springs are very common in the point-of-purchase or POP industry, especially in shelf pushers. Variable force springs provide variable force to precisely match increasing or decreasing force requirements, propelling the product horizontally forward. Due to their wide applicability, these springs can be seen in the tobacco, cosmetic, electronics and medical industries. So why use variable force springs in shelf thrusters? 1. Inventory Control Variable force springs are commonly used in trays that push products forward in a controlled manner. Variable-force springs in the push-in trays aid product fronts, so the shelves are always well-stocked. These trays allow for more organized store inventory and help track inventory needs. This is even more critical in today's COVID-conscious environment. 2. Product Integrity Variable force springs are designed around the weight of the product they push. This ensures that the product is never slammed or damaged when it is selected. Variable force springs allow most products to be pushed with a consistent force regardless of item weight. At Qianye Precision, we understand the importance of displaying products in high-end retail spaces. We take this into account in every design. 3. Customer Satisfaction Variable force springs make shopping easier for consumers because products are displayed in a more organized and aesthetically pleasing manner. Products include cosmetics, nutraceuticals and pharmaceuticals, beverages, food, and anything suitable for retail display. In terms of the design of the variable force spring under consideration, because the force...

Overfladerengøringsmetode af rustfri stålfjeder: The spring of thousand industry precision hair has excellent application in different fields, for example, the products of the company have been widely used in LCD display lifting bracket, automobile special motor, medical treatment, lifting fan, lifting window accessories, vacuum cleaner, sales rack and other fields. With the development of modern technology, stainless steel hairline, as a more common elastic element in modern technology, has a huge function and its application is becoming more and more obvious. The company is to provide professional stainless steel hair spring surface treatment methods. 1、 Two methods of removing oxide skin and oil pollution by spring are as follows: 1. Dilute the cleaning agent and clean water in ultrasonic equipment about 1:30. When the spring surface is free of oxygen, no oil and the metal color is appropriate, then take out water and clean it. In this way, the treated stainless steel hair surface can achieve the effect of sub light. 2. Dilute the cleaning agent and clean water as 1:1 or 1:2, and then immerse the stainless steel hair strip into the solution until the surface of the spring is free of oxygen and no oil to restore to the metal color. Then take out the water and clean it. After this treatment, the stainless steel hair surface is also used to achieve the effect of Matt. 2、 Two methods of bright surface of the spring are as follows: 1. The volume of spring and coarse abrasive is matched according to 1:3. The amount of cleaning agent is 1% to 2% of the...

How to make the constant force spring produce more force: A common way to install a constant force spring is to use two or more springs to obtain greater force in a narrow space. This may be necessary if the diameter or width of a single spring exceeds the allocated space, but there is room to add multiple smaller springs. When engaging multiple springs, a much smaller spring design can be used. The total force is the sum of the spring forces. When combining springs, it is recommended to use the same spring for multiple installation. Compared with using two or more completely different springs to realize the load, this method is more economical and the design will be simpler. Since the force is the sum of the springs, the total force required should be evenly distributed between the number of springs used. We will discuss three different mounting methods for use with multiple springs. 1、 Back to back method The back-to-back method uses two springs that expand in opposite directions and produce a very stable extension. The distance between the springs should be far enough to allow the spring material to bend naturally so that the component will not bind when retracted. 2、 Series method When two or more springs are used, it is also a very common practice to install springs in series. Although this method does not have the stability of the back-to-back method, space availability usually determines the use of this design. 3、 Laminar flow method Laminating springs together is the third option in this series. The term...

Hvorfor er støtten vigtig for, at folk skal stå over for skærmen i lang tid?: What do you think of the correct sitting posture in office? Relax your shoulders, keep your eyes in front, and keep your eyes balanced at the top of the computer or the top 3 / 1 of the monitor. This is the correct sitting posture of our office. To stand our neck, we need a certain height of the display. The horizontal position of the display is low, and the neck is easy to tilt forward. The cervical spine will obviously feel uncomfortable, very tired, and will cause pressure on the muscles of the neck. The display bracket is mainly composed of upper support arm, lower support arm, display connector and desktop clamp. The most important core lifting components are in the upper support arm, which supports the display through the deformation of spring or air rod structure in the upper arm. When it comes to the spring in the core lifting part, the reason why the display can rise and fall is that it is designed into a lifter that can adjust the height of the display at will by using the principle of free rise and fall of constant force spring. With the help of the tension of the spring, its height can be adjusted freely. Compared with the column support (the lifting up and down is cumbersome, and the screws need to be adjusted by tools every time) it is simpler to use and more convenient to operate after adding a spring. It only needs a little effort to complete the adjustment, which can be said...

Advantages of Qianye power spring in electrical take-up: As we all know, take-up spring can help take-up. It is used in many electrical products, and hair dryer is no exception. However, all such household appliances have a common feature, that is, they need a wire group to connect the power supply. However, this power line will bring some trouble to our sorting. The function of winding up lies in this. It can bring a free shrinkage process to the electrical wire group and make its winding up easy and practical. In fact, although the process of electrical wiring is not a high-end principle, it is better than cleverness. Its working principle is not complicated. It uses the spring box to limit the outer diameter, so that the center of the spring is connected with the power shaft. When the line is pulled out, it can make the shaft and the spring rotate relatively, and the spring will roll on the power shaft and store the corresponding kinetic energy. When the external force disappears, the spring will generate torque to drive the power shaft, so that the line can be retracted back into the box. In the take-up function of the reel, the effect of the power spring can not be underestimated. It can often help the required goods to take up the line quickly and simply, and become an auxiliary software favored by people. It is also due to the spring to store kinetic energy. It uses the characteristics made by the spring bearing force, and effectively uses its mechanical energy storage and driving force output, so that...

Advantages of Qianye constant force spring in technology: Spring is a commonly used component in industry. It is used in all kinds of products, from aircraft and warships to mobile phones and cameras. Therefore, the production of spring has a history of hundreds of years. Constant force spring has the characteristic of maintaining constant force in long stroke. Its function can be applied to the application of products that need linear movement such as round-trip, sliding, stretching, homing, balancing or labor-saving, such as lifting doors and windows, computer display and fan height adjustment, store display shelf or motor carbon brush motor. On the market, constant force spring manufacturers generally use eight claw spring machine, which is called eight claw machine for short. The eight claw spring machine is continuously developed on the basis of three axes. The eight position claw arms of the eight claw spring machine can rotate 360 degrees in the forward and reverse directions. The working sequence of the curved arms is determined by the shape or angle of the cam plate, and then the auxiliary tools such as curve gauge, angle bender, collision knife or cutter are used to complete the processing of spring products. The surface of the constant force spring produced by the eight claw machine will be rough, the force value is unstable, it is easy to loosen the ring, and the service life is relatively short. However, Qianye uses the spring coiling machine. The constant force spring produced by the spring coiling machine can meet the strength requirements in a limited space; Qianye also strengthens from two...

Traditionelle kraftfjedre og forspændte fjedre: Traditional power springs and preloaded power springs are fabricated from spring steel bars to provide torque. Spring steel is a low alloy, medium carbon steel or high carbon steel with a very high yield strength. Objects made of spring steel can return to their original shape despite significant bending or twisting. Power springs use flat (unstressed) steel windings, while pre-stressed power springs use pre-stressed steel to produce a larger range of usable torque than conventional power springs. During the manufacturing process, the spring is wound into the retaining ring or the customer's housing (the retaining ring is pictured below). When ready for final installation, carefully install the spring into its housing with the outer end attached to the outer edge and the inner end attached to the mandrel (see photo below). During operation, the housing or mandrel will be fixed while the other component is free to rotate. Depending on the requirements of your specific design, it may be beneficial to use a fixed mandrel/free box or free box/fixed mandrel arrangement. These springs are typically used to retract the cord or cable of the spool. You might see it in lawn mowers, retractable lanyards, or dog leashes. This is also the type of spring used to drive many mechanical clocks and timers, which is why they are sometimes called "clock springs". The load provided by the spring increases with the cross-sectional area of the material. The number of turns the spring can provide depends on the space available between the mandrel and the...

telefon

+86 13827443413
E-mail

sales@qianyejm.com
tilbud
WhatsApp