Maison > Blog > Informations sur l'industrie > Application d'un ressort de balai de charbon dans un porte-balai à bague collectrice d'éolienne

Application d'un ressort de balai de charbon dans un porte-balai à bague collectrice d'éolienne

la source:Précision Qianye temps:2022-9-14

In order to prevent accidents caused by excessive wear of the carbon brushes on the collector device of the slip ring brush holder of the wind turbine, a normally closed switch-type alarm unit is configured for each carbon brush, and these alarm units are connected in series to the alarm. In the prior art, the grounding brush is held on the structure using a coil spring pressure finger lever structure. In order to ensure sufficient pressure after the carbon brush is worn, the initial pressure of the spring has to be increased, which aggravates the wear of the carbon brush. However, in the later stage of carbon brush wear, the tension of the coil spring becomes insufficient again, resulting in poor contact between the carbon brush and the slip ring, frequent beating, resulting in breakage; at the same time, from the carbon brush to the alarm unit, the intermediate link is complex and easy to Lead to false alarm or no alarm, reducing the reliability of the system.

In order to overcome the shortcomings of the prior art, a novel slip ring brush holder collector of wind turbine generator with simple structure, reduced wear of grounding carbon brushes and reliable operation is provided. The slip ring brush holder collector of wind turbine includes slip ring, brush holder, main carbon brush and grounding carbon brush, and the pressure end of the grounding carbon brush with alarm pressure piece is pressed by a coiled constant pressure spring. The constant pressure spring grounding brush holder structure greatly improves the force on the carbon brush during operation and reduces wear; The structure of the action mechanism is simplified, and the brush directly touches the alarm unit, which effectively enhances the reliability of the alarm mechanism.

   Roll type constant pressure spring, also known as carbon brush holder spring, has the following characteristics:
  1. Due to the fixed force, no matter the length of the carbon brush, it maintains the same pressure with the commutator.
  2. The constant force spring reduces the friction consumption of the carbon brush, increases the service life of the carbon brush, and reduces the current loss.
  3. It can miniaturize the motor design and reduce the outer diameter of the motor.
  4. The length of carbon brush can be increased.
  5. Larger commutators can be used.

  6. Reduce sparks and electromagnetic interference (EMI).

  And the carbon brush spring is an important part of the motor. Because of the environment and application, we need to use it often. So it is important to know where to buy high-quality carbon springs.

  Qianye precision is a global spring manufacturer with more than 20 years of spring manufacturing experience. As a professional spring supplier, we can provide all kinds of carbon brush springs, as well as various application designs and solutions for spring springs. We sincerely suggest that customers can obtain consulting services with our R & D engineers at the early stage of product introduction and development. According to the needs of customers and assist in product design, development, proofing, so that your products can find the best solution to meet your application needs.

Dernières nouvelles

 The new computer monitor spring design offers greater durability and flexibility
The new computer monitor spring design offers greater durability and flexibility

Time:2023-3-22

Computer monitors are an essential component of any modern computing system. They allow us to see and interact with the graphical user interface that enables us to use our computers for a wide range of applications, from word processing and data analysis to gaming and entertainment. Over the years, computer monitors have undergone significant improvements in design and functionality, leading...

 Design steps of constant torque spring
Design steps of constant torque spring

Heure:2022-9-15

Constant torque spring is a constant force spring with special force moving between two spools. The spring is stored on the storage spool and wound reversely on the output spool. When released, torque is obtained from the output spool when the spring returns to its natural curvature on the storage spool. The spring does not need to be connected to the...

 Spring Your Curtains Up with Hanging Springs: A Practical Solution
Spring Your Curtains Up with Hanging Springs: A Practical Solution

Time:2023-11-25

Curtains play a crucial role in enhancing the aesthetics of a room while also providing privacy and controlling the amount of natural light that enters a space. However, the traditional methods of hanging curtains can be time-consuming and frustrating. Luckily, there is a practical solution that makes hanging curtains a breeze – hanging springs. Hanging springs are a revolutionary device...

 [Qianye precision]Constant force spring design in 8 steps
[Qianye precision]Constant force spring design in 8 steps

Heure:2022-9-15

 The constant force spring is made of stainless steel strip. The high-strength steel strip is shaped by specific spring production equipment. When it is straightened by external force, the spring will naturally roll back and produce elastic force. However, when our goal is achieved, it can return to the starting point specified by us after displacement. Constant force spring has the characteristic of...

 Benefits of Using Stainless Steel Springs in Industrial Applications
Benefits of Using Stainless Steel Springs in Industrial Applications

Time:2023-6-16

Springs have been an essential component in various industrial applications for centuries, and they continue to play a vital role in modern engineering and manufacturing processes. Springs are used in a wide range of applications, from small compression springs to large torsion springs. One of the most significant advancements in spring technology has been the development of stainless steel springs....

 Introduction to Constant Force Springs
Introduction to Constant Force Springs

Time:2023-5-5

Constant force springs are mechanical devices designed to exert a constant force over a specific distance. They are used in a wide range of applications, from automotive and aerospace engineering to medical equipment and consumer products. In this article, we will explore the basics of constant force springs, including their construction, properties, and applications. Construction of Constant Force Springs Constant...

Product
 Ressort à force constante
Ressort à force constante
Caractéristique: Les ressorts à force constante (force constante) sont roulés par des bandes d'acier inoxydable. Les bandes d'acier à haute résistance sont mises en forme par des équipements de production de ressorts spécifiques. Lorsque la force extérieure les redresse, le...
 Service de conception d'optimisation
Service de conception d'optimisation
Des idées de produits, de la conception à la fabrication du produit fini, nous pouvons aider les clients à les réaliser et aider les clients à optimiser leurs produits du point de vue professionnel de l'utilisation du ressort, accélérer...
 Ressort à torsion constante
Ressort à torsion constante
Caractéristique: Le ressort à couple fixe (constant) (ressort) est en acier inoxydable. La force externe rembobine le ressort moteur de son état naturel vers la roue de sortie (stockage d'énergie). Quand le...
 Ressort de puissance
Ressort de puissance
Caractéristique : Le ressort de puissance est enroulé par une bande d'acier. Une boîte à ressort est nécessaire pour limiter son diamètre extérieur. Le centre du ressort est relié à l'arbre. Lorsque...
 Ressort à force variable
Ressort à force variable
Caractéristique: L'apparence du ressort à force variable et du ressort à torsion variable est très similaire au ressort à force constante et au ressort à torsion constante. Les ressorts à force variable et les ressorts à torsion variable peuvent...
 Ressort de balai de charbon
Ressort de balai de charbon
Caractéristique : 1. En raison de la force constante, quelle que soit la longueur du balai de charbon et du collecteur, la pression reste la même. 2. Le ressort à force constante réduit les balais de charbon...