ບ້ານ > ບລັອກ > ບັນຫາທົ່ວໄປ > Electric Fan Lifts Off with Spring-Powered Boost

Electric Fan Lifts Off with Spring-Powered Boost

ທີ່ມາ:Qianye ຄວາມຊັດເຈນ ເວລາ:2023-4-28

A team of researchers from Empa, the Swiss Federal Laboratories for Materials Science and Technology, have designed a new type of electric fan that can lift off the ground and hover, thanks to a spring-powered boost.

The device, known as the FanFlyer, works by using a pair of curved blades that spin in opposite directions, much like a helicopter. However, instead of relying on a heavy motor and battery system, the FanFlyer uses a lightweight electric motor that drives a wound spring. When the spring is released, it drives the blades and lifts the device off the ground.

The FanFlyer is a very simple and lightweight device, but it has the potential to revolutionize the way we think about electric flight,” said Dr. Markus Rapp, who led the research team. “Because it doesn’t require a heavy battery or motor, it could be used for a wide range of applications, from aerial photography to remote sensing.”

One of the key advantages of the FanFlyer is its simplicity. Unlike conventional drones or helicopters, it has no complex control systems or stabilizers. Instead, it relies on the natural stability of the spinning blades to keep it aloft. As a result, it is much easier to operate and requires less training and expertise.

Another advantage is its efficiency. Because it uses a wound spring to power the blades, it is much lighter and more energy-efficient than conventional electric motors. This means it can fly for longer periods of time, and cover greater distances, on a single charge.

 

 

To demonstrate the potential of the FanFlyer, the research team conducted a series of flight tests, both indoors and outdoors. They found that the device was able to lift off and hover with ease, and was able to fly in a straight line and change direction smoothly.

The team also explored the possibility of using the FanFlyer for environmental monitoring, such as measuring air pollution levels or monitoring wildlife populations. Because it is so lightweight and quiet, it could be used to fly over sensitive areas without disturbing wildlife or causing any damage.

Overall, the FanFlyer is a promising new development in the field of electric flight. Its simplicity, efficiency, and versatility make it an attractive option for a wide range of applications and could help to pave the way for a new generation of lightweight, low-cost aerial vehicles.

ຂ່າວ​ລ່າ​ສຸດ

 Spiral Torsion Springs: A Comprehensive Guide
Spiral Torsion Springs: A Comprehensive Guide

Time:2023-6-25

Spiral torsion springs are an essential component in many mechanical devices, including door hinges, valves, and electrical switches. These springs provide the necessary force to counteract the weight of the object they support, ensuring smooth and efficient operation. In this article, we will explore the structure, materials, and applications of spiral torsion springs. Structure of Spiral Torsion Springs Spiral torsion...

 Spiral Torsion Spring Mechanism: A Comprehensive Exploration
Spiral Torsion Spring Mechanism: A Comprehensive Exploration

Time:2023-11-19

Introduction: The spiral torsion spring mechanism is a fundamental component in various engineering applications. It is widely used in industries such as automotive, aerospace, and robotics. This mechanism provides torsional resistance and is crucial for controlling rotation and torque. In this article, we will delve into a comprehensive exploration of the spiral torsion spring mechanism, discussing its design principles, applications,...

 What are the mechanics and applications of high cycle torsion springs?
What are the mechanics and applications of high cycle torsion springs?

Time:2023-7-20

Introduction: High cycle torsion springs are mechanical devices that store and release energy by twisting or rotating. They are widely used in various industries for their ability to withstand repeated cycles without experiencing fatigue failure. In this article, we will explore the mechanics behind high cycle torsion springs and their applications. Mechanics of High Cycle Torsion Springs: A high cycle...

 Creating Effective Carbon Brush Springs for Improved Performance
Creating Effective Carbon Brush Springs for Improved Performance

Time:2023-4-21

Carbon brushes are essential components of many electrical devices, including motors, generators, and alternators. These brushes are designed to make contact with a rotating commutator or slip ring, allowing for the transfer of electrical charge. However, to ensure efficient and reliable operation, the brushes must be held in place by a suitable spring mechanism. The choice of carbon brush spring...

 Mastering Precision with Constant Torsion Springs: A Comprehensive Guide
Mastering Precision with Constant Torsion Springs: A Comprehensive Guide

Time:2023-12-21

Introduction: In the intricate world of mechanical engineering, constant torsion springs emerge as silent heroes, providing precision and reliability to various applications. This blog post dives into the realm of constant torsion springs, unraveling their significance, benefits, challenges, and real-world applications. Benefits: Precision Engineering: Constant torsion springs are engineered with meticulous precision, offering consistent angular torque throughout their rotation. This...

 Design and Analysis of a Constant Force Spring Reel
Design and Analysis of a Constant Force Spring Reel

Time:2023-6-14

Design and Analysis of a Constant Force Spring Reel Introduction Constant force spring reels are commonly used in various applications such as cable and hose management, and retractable devices. The primary function of a constant force spring reel is to provide a constant force as the spring is unwound. This article discusses the design and analysis of a constant force...

Product
 ພາກຮຽນ spring torsion ຄົງທີ່
ພາກຮຽນ spring torsion ຄົງທີ່
ລັກສະນະ: ຄົງທີ່ (ຄົງທີ່) torque ພາກຮຽນ spring (ພາກຮຽນ spring) ແມ່ນເຮັດດ້ວຍສະແຕນເລດ. ຜົນບັງຄັບໃຊ້ພາຍນອກ rewins mainspring ຈາກສະພາບທໍາມະຊາດຂອງມັນໄປສູ່ລໍ້ຜົນຜະລິດ (ການເກັບຮັກສາພະລັງງານ). ໃນ​ເວ​ລາ​ທີ່...
 ພາກຮຽນ spring ແຮງປ່ຽນແປງ
ພາກຮຽນ spring ແຮງປ່ຽນແປງ
ລັກສະນະ: ຮູບລັກສະນະຂອງພາກຮຽນ spring ຜົນບັງຄັບໃຊ້ທີ່ປ່ຽນແປງໄດ້ແລະພາກຮຽນ spring torsion ຕົວປ່ຽນແປງແມ່ນຄ້າຍຄືກັນກັບພາກຮຽນ spring ຜົນບັງຄັບໃຊ້ຄົງທີ່ແລະພາກຮຽນ spring torsion ຄົງທີ່. ແຮງບິດທີ່ປ່ຽນແປງໄດ້ ແລະສະປິງແຮງບິດທີ່ປ່ຽນແປງໄດ້ສາມາດ...
 ພາກຮຽນ spring ແປງກາກບອນ
ພາກຮຽນ spring ແປງກາກບອນ
ລັກສະນະ: 1. ເນື່ອງຈາກກໍາລັງຄົງທີ່, ບໍ່ວ່າຈະເປັນຄວາມຍາວຂອງແປງກາກບອນແລະ commutator, ຄວາມກົດດັນຍັງຄົງຢູ່ຄືກັນ. 2. ພາກຮຽນ spring ຜົນບັງຄັບໃຊ້ຄົງທີ່ຫຼຸດຜ່ອນແປງກາກບອນ ...
 ບໍລິການຕິດຕັ້ງແລະຕິດຕັ້ງ
ບໍລິການຕິດຕັ້ງແລະຕິດຕັ້ງ
ບໍລິສັດ Qianye ບໍ່ພຽງແຕ່ສະຫນອງການຜະລິດຂອງພາກຮຽນ spring ຄວາມແມ່ນຍໍາ, ແຕ່ຍັງສຸມໃສ່ການອອກແບບໂຄງສ້າງແລະການແກ້ໄຂທີ່ເປັນປະໂຫຍດຂອງລະບົບພາກຮຽນ spring ທັງຫມົດ, ແລະສາມາດສະຫນອງການສໍາເລັດ ...
 ພາກຮຽນ spring ຜົນບັງຄັບໃຊ້ຄົງທີ່
ພາກຮຽນ spring ຜົນບັງຄັບໃຊ້ຄົງທີ່
ລັກສະນະ: ຜົນບັງຄັບໃຊ້ຄົງທີ່ (ແຮງຄົງທີ່) ພາກຮຽນ spring ແມ່ນມ້ວນດ້ວຍແຖບສະແຕນເລດ. ແຖບເຫຼັກທີ່ມີຄວາມເຂັ້ມແຂງສູງແມ່ນຮູບຮ່າງໂດຍອຸປະກອນພາກຮຽນ spring ການຜະລິດສະເພາະ. ເມື່ອ​ກຳ​ລັງ​ພາຍ​ນອກ​ເຮັດ​ໃຫ້​ເຂົາ​ເຈົ້າ​ກົງ,...
 ພາກຮຽນ spring ພະລັງງານ
ພາກຮຽນ spring ພະລັງງານ
ລັກສະນະ: ພາກຮຽນ spring ພະລັງງານແມ່ນ coiled ດ້ວຍແຖບເຫຼັກ. ປ່ອງພາກຮຽນ spring ແມ່ນຈໍາເປັນເພື່ອຈໍາກັດເສັ້ນຜ່າກາງນອກຂອງມັນ. ສູນກາງຂອງພາກຮຽນ spring ແມ່ນເຊື່ອມຕໍ່ກັບ shaft ໄດ້. ເມື່ອ​ໃດ​...